home › Mozilla Firefox › How to remove a password on a windows 7 laptop. If you suddenly forgot your Windows password: Break your password! How to reset password on windows of any version

How to remove a password on a windows 7 laptop. If you suddenly forgot your Windows password: Break your password! How to reset password on windows of any version

A password is the foundation of security for any system, and it helps to lock your computer from third parties who intend to use it. By neglecting safety, you consciously assume all possible consequences of your actions. It often happens that it is too annoying to enter a password, especially when you are the sole owner of the computer. So how do you remove the password when logging into Windows 7?

Before removing it, let's take a look at the merits of such a system.

In order to achieve the desired result, it is not necessary to remove your password set on the account, there is an option to create new account.

Thanks to such actions, you will be able to:

Be protected from unwanted computer use;
Log in to an unsecured account;
Protect your PC from malicious actions of certain viruses that will not be able to run without the required access level.

Such an alternative exists, and within the framework of this article we will briefly consider it, read in more detail in the next publication. But first, we will perform the actions related to the immediate topic of the article. In order to achieve the desired result, you will need access as administrator and, of course, a password for writing during the procedure.

Disable Windows 7 login password requirement

1. Open the "Run" line, here administrative rights will come in handy, without them you will not get access, press Win + R;

3. You will be taken to the "User Accounts" window, below are all user accounts created earlier, select the one you need and uncheck the "Require username and password" checkbox;

4. After that apply the specified changes, you will be asked to enter Old Password to confirm these actions.

There is also another method, it is almost identical to the previous one, except that it does not need to use the command line to find the settings window account.

The method also differs in that you do not remove the requirement to enter a password before starting the system, but delete the password, thereby removing the need to ask for it.

How do I remove my password?

The starting requirements are the same, access to the administrator account and the password for the desired account.

1. Most in an accessible way to get to the desired menu is to click on the picture that represents your avatar. In the current account, to do this, open "Start" and click on the picture, go directly to step 3;

2. This paragraph has the right to life, because in some versions of themes used from third-party developers, there is no such window, you should follow a different path:

Click on the Windows sign in the lower left corner, "Start" should open, select the "Control Panel" option;
Find, often at the bottom, "User Accounts" and click on it.

3. Go to the "Delete your password" tab;

4. Enter it, in an empty line, and click "Remove password";

Another similar option may be: instead of deleting the code (point 3), go to "Change your password", enter the old password, and leave the place for the new one empty, so there will be no password.

Sometimes the option does not work completely, your computer still asks for a password when you log in, but allows you to access your account by simply pressing Enter, without a password. If you have such a problem, then use the first method, disabling the Windows function that is responsible for requiring a password at logon.

Creating a Windows 7 account

1. Open the account settings menu, as we did just now, and click "Manage another account";

2. You will see a window with accounts that already exist, and at the bottom the button "Create an account" is what you need;

3. 2 parameters are required: name and its type, normal or administrator access;

4. After all, click on "Create an account" and you can use it.

Now, if you click the button that is slightly to the left of "Shutdown" in the "Start" menu, you will see a list of possible options for shutting down the system, you need to click "Change user" and switch between them, if necessary. When you start your computer, you will be able to go directly to the newly created entry.

We already have a description of many functions on our site that are relevant and useful for the user, therefore we will not dwell on this, but it is important to understand the differences between all methods. In the first case, you completely delete the password, in the second, you set it to empty, and in the third, you simply create a new account without a password, and leave the Administrator protected.

You need to understand that the most important system commands can only be executed on behalf of the Administrator.

If you still have questions on the topic "How to remove a password when enteringWindows7? ", You can ask them in the comments

Before removing it, let's take a look at the merits of such a system.

In order to achieve the desired result, it is not necessary to remove your password set on the account, there is an option to create a new account.

Thanks to such actions, you will be able to:

Be protected from unwanted computer use;
Log in to an unsecured account;
Protect your PC from malicious actions of certain viruses that will not be able to run without the required access level.

Disable Windows 7 login password requirement

1. Open the "Run" line, here administrative rights will come in handy, without them you will not get access, press Win + R;

3. You will be taken to the "User Accounts" window, below are all user accounts created earlier, select the one you need and uncheck the "Require username and password" checkbox;

4. After that, apply the specified changes, you will be asked to enter the old password to confirm these actions.

How to speed up a windows 7 laptop?

There is also another method, which is almost identical to the previous one, except that it does not need to use the command line to find the account settings window.

The method also differs in that you do not remove the requirement to enter a password before starting the system, but delete the password, thereby removing the need to ask for it.

How do I remove my password?

The starting requirements are the same, access to the administrator account and the password for the desired account.

1. The most accessible way to get to the desired menu is to click on the picture that represents your avatar. In the current account, to do this, open "Start" and click on the picture, go directly to step 3;

2. This paragraph has the right to life, because in some versions of themes used from third-party developers, there is no such window, you should follow a different path:

Click on the windows sign in the lower left corner, "Start" should open, select the "Control Panel" option;
Find, often at the bottom, "User Accounts" and click on it.

3. Go to the "Delete your password" tab;

4. Enter it, in an empty line, and click "Remove password";

Another similar option may be: instead of deleting the code (point 3), go to "Change your password", enter the old password, and leave the place for the new one empty, so there will be no password.

Sometimes the option does not work completely, your computer still asks for a password when you log in, but allows you to access your account by simply pressing Enter, without a password. If you have this problem, then use the first method by disabling windows function responsible for requiring a password when entering the system.

Creating a windows 7 account

1. Open the account settings menu, as we did just now, and click "Manage another account";

How to choose a computer mouse?

2. You will see a window with accounts that already exist, and at the bottom the button "Create an account" is what you need;

3. 2 parameters are required: name and its type, normal or administrator access;

4. After all, click on "Create an account" and you can use it.

You need to understand that the most important system commands can only be executed on behalf of the Administrator.

However, you can create another account with administrator rights, so they will have equal rights to access and edit content. Be careful and do not give them without the proper level of trust, as this will make your computer more vulnerable. If you still have questions on the topic "How to remove the password when entering windows 7?", You can ask them in the comments

Was the material helpful to you? Leave your review or share in the social. networks:

(1 ratings, average: 5.00 out of 5) Loading ...

tvoykomputer.ru

Forgot your password to enter windows 7? No problem! This article will help you reset it!

Good day, dear readers and again Denis Trishkin is in touch.

V latest versions operating systems from Microsoft, for security reasons, it is possible to set a password for logging into work area... If this tool is no longer relevant, you can turn it off. I will tell you how to remove the password in windows 7 in several ways. After all, it gets boring to constantly enter secret characters sooner or later. This is especially irrelevant when only one person works at the computer.

Why do I need a password? (Back to content)

Many users store information on their computer that only they should have access to. If only one person is using the device, this is not a problem. But in the case when another can approach him, certain difficulties may appear.

Windows provides a special tool that restricts access to data by installing a personal key. For example, parents often use this tool so that their children cannot see the content they are not entitled to. In addition, this way you can protect yourself from changing your personal settings.

Disable password (back to contents)

There are several ways to turn off the introduction of the key to the entrance. Each of them assumes that you are the owner of the account that needs to be updated. The first means that the password is known and the user has administrator rights.

It allows you to quickly deal with this problem:

That's all. Now when you start the system, you will not be prompted to enter the secret key.

Important! At the same time, if you change your account or go to the lock screen, you will still need to enter the password.

You can remove the annoying feature using the standard User Accounts menu. True, in this way, not a shutdown will occur, but a complete removal. Despite this, Password will not be prompted under any circumstances, even after waking up from hibernation.

To turn off the protection tool, do the following:

That's it, now the system will not ask "stupid questions" regarding security from this area. Here you can also create a secret combination of symbols.

Interesting to know! Experts recommend that when installing the key, enter large and small letters on different languages while also adding numbers. In this case, the length must be at least six characters. This is the only way to guarantee at least some kind of security.

Reset network key (back to contents)

Probably all computer users know what a network is. It is a connection between two or more devices, which allows information to be exchanged. The younger generation is familiar with this concept, since it is possible to play games together through this method.

But what if after connecting the machines, a window for entering the network password appears? Moreover, if it does not exist, confirming an empty string will not lead to the desired result.

The fact is that new security tools are provided in windows 7, and therefore it is necessary to comply with several conditions for entering at once:

Using the classic setting on all devices.

If all this is done, then you will not need to enter secret characters.

Resetting administrator password (back to contents)

Sometimes there are situations when, under some circumstances, you simply forgot the password with which you can get to the desktop, and indeed get access to personal data. This often happens when the user is constantly working on several devices. And if passwords are not written anywhere on them, then it is quite possible to confuse them.

There are several solutions. The first thing you can do is spend some time on the selection. Alternatively, simply remove the system from your computer and install a new one. But in this case, the data that was on the system disk will be lost. And it's not a fact that they can be restored, although there are methods.

But there are more safe way- the bypass, which I want to tell you about. This will require installation disc or a flash drive with windows. It is important to note that the operating system must be exactly the same. For example, if the Ultimate version is installed, then it is the same on the portable device.

So, if everything is found and prepared, you can proceed:

After the done work, the command line will appear during OS boot. This is where we can change the password. To do this, enter the "net user user password" line. We confirm the action. Example command: "net user admin 1111".

In this way, we changed the password for the "admin" user to "1111". Now, in the offered window, enter our cherished numbers and wait for the download.

Reset password via SAM file (back to table of contents)

There are many ways to bypass login security. Despite this, they all only change the information that is stored in the SAM file. It is in it that all the necessary data are indicated that relate to the User-Password bundles.

It should be noted that this file does not have a special extension. The point is that it is a component of the registry. It can be found in the "windows \ system32 \ config" folder located on the system drive.

It is also important to note that this method is considered one of the most difficult. Nevertheless, I consider it necessary to tell it to you. For work we need special program... At the same time, each step must be performed with extreme caution, because this can radically change the whole process.

We will be using Active password changer. We also need a blank USB stick.

So, to remove the password prompt, you need:

If everything goes as it should, no problems should arise in the future, since only the components we need change in the system area.

The only drawback is that some relatively old motherboards may not support starting from portable memory. In this case, you can use a plastic disc.

Well, as you can see, there are several different ways allowing you to remove or change the account password. Moreover, they are absolutely simple, you don't even need to watch the video. Following clearly everything according to the instructions, everyone will be able to open access to the information you need.

I hope that everyone here will find an option for themselves that will help to cope with the problem. Subscribe and tell your friends about me!

windwix.ru

How to remove the password when entering windows 7.8, etc.?

Good time friends! Yesterday I was asked in the mail, but how to remove the password when entering windows 7 or 8? Well, as usual, I decided to write an article about this and tell you the same thing. In order to secure the use of Windows 7, the user is able to enable password entry at startup. If you no longer need this option, then mandatory filling password fields can be overridden. So, first you need to select an account that will be automatically loaded upon activation of the PC. Along with this, you will need administrator rights. Let's take a closer look at how to do this.

In order to remove the password when entering windows, first enter a special directive in the command line.

To do this, press the key combination "Win + R", after which you will see a window for entering commands. Here you should also enter "control userpasswords2" and confirm your intentions by clicking on the "OK" button.

Turn off the mandatory password entry.

You will see a control window where you can manipulate accounts in every possible way. Select the desired user, which will be activated automatically, then uncheck the box "Require name entry ..." and click on the "OK" button.

We confirm our actions.

In the displayed window, the account will be loaded by default when the PC is turned on. In addition, if she already has a password, then you must enter it. It will be saved and automatically entered when the OS is activated. If you want, you can completely remove it.

On a note! I want to tell you something to my friends in order to receive my articles directly to your mail - you just need to enter your email address at the end of the article in the window and then confirm your subscription in the e-mail. I will also be grateful if you read articles on how to reduce the brightness of the screen on a computer or how to disable sleep mode in Windows 7. I also told you how to permanently delete a VKontakte page and how to turn on bluetooth on a laptop.

On this I have all my friends, I hope you now know how to remove the password when entering windows 7 or 8. If something did not work out for you, you can write to me in the comments and I will definitely help everyone. Do not forget to put likes, as well as say thank you in the comments from VKontakte. All only positive emotions for the next month)))

From Uv. Evgeny Kryzhanovsky

public-pc.com

How to put a password on windows, remove it and reset it if you suddenly forget

Please note that you must use a local account to complete most of the instructions in this article. windows entry with administrator rights.

How to put a password on a windows computer

If other people have access to your computer, it is wise to password protect windows. This way your settings and data will be safe: without special knowledge, no one can view or change them. windows will ask you for a password when you turn on your computer, when you change your account, or after waking up from hibernation.

How to set a password on windows 10

Go to Start → Settings (gear icon) → Accounts → Login Options.
Click Add under Password.
Fill in the fields as prompted by the system and click "Finish".

How to set a password on windows 8.1, 8

In the right side panel, click Settings (gear-shaped icon) → Change computer settings. In the menu of the window that opens, select "Accounts" (or "Users"), and then "Login Options".
Click on the "Create Password" button.
Fill in the fields, click Next and Finish.

How to put a password on windows 7, Vista, XP

Open "Start" → "Control Panel" → "User Accounts".
Select the required account and click "Create password" or immediately click "Create password for your account".
Fill in the fields using the system prompts and click on the "Create password" button.

How to remove the password when entering windows of any version

If outsiders do not have physical access to your computer, it may be better to disable protection. This eliminates the need to enter a password each time the system starts up.

Use the windows + R key combination and type netplwiz (or control userpasswords2 if the first command does not work) at the command line. Hit Enter.
In the window that opens, select in the list the account for which you want to remove the password, and uncheck the box next to the item "Require username and password to be entered". Click OK.
Enter the password, confirm it and click OK.

windows will stop asking for a password only when the computer is turned on. But if you lock the screen ( windows keys+ L), log out or the computer goes into sleep mode, the display will still ask for a password.

If the "Require username and password" option is unavailable or you want to remove the windows password rather than disable it, try another method for more advanced users.

To do this, open the Account Management section using one of the instructions at the beginning of this article.

If the open section says that you are using a Microsoft online profile (login by email and password), disable it. Then use the system prompts to create a local profile, but leave the password fields blank in the process.

After disconnecting the account Microsoft system will stop syncing your settings and files to different computers... Some applications may refuse to work.

If the local profile is initially active in the account management menu, then simply change the current password, leaving the fields for the new password blank.

When you delete an old password, the system will never ask you for it until you add a new one.

How to remove a password when waking up from sleep mode

If you disable the password prompt when starting windows, the system may still ask for it on wakeup. But you can deactivate this feature separately using these instructions.

How to remove password when waking up windows 10, 8.1, 8, 7 and Vista

In the search bar in windows, enter "Power supply" and click on the link found to the section with the same name. Or find it manually through the "Control Panel".
Click "Prompt for a password on wakeup", then "Change settings that are currently unavailable" and check the box next to "Do not prompt for a password."
Save your changes.

How to remove password when waking up windows XP

Open the section "Control Panel" → "Power Options".
In the window that appears, open the "Advanced" tab and uncheck the box next to the "Prompt for password when exiting standby mode" item.
Save your changes.

How to reset password on windows of any version

If you have forgotten your password and cannot log into the local windows administrator profile, you do not need to reinstall the OS. There is a simpler way out: reset password protection. To do this, you will need another computer, a USB stick, and free utility to reset your password.

Create a bootable USB drive on another PC

Download the Lazesoft Recover My Password installer to any accessible computer.
Run the downloaded file and complete the installation.
Connect the USB flash drive to your computer. If necessary, make a copy of the files stored on it, as all information will have to be deleted.
Open Lazesoft Recover My Password, click Burn Bootable CD / USB Disk Now! and create bootable USB drive using the program prompts.

Boot your computer with a USB stick

Insert the prepared USB drive into the computer for which you have forgotten the password.
Turn on (or restart) the PC and, as soon as it starts to boot, press the go to BIOS settings... This is usually F2, F8, F9, or F12 - depending on the hardware manufacturer. Most often, the desired key is highlighted on the screen during BIOS boot.
While in the BIOS menu, go to the Boot section if the system did not redirect you there right away.
In the Boot section, place the USB flash drive in the first place in the list of devices that appears on the screen. If you don't know how to do this, take a look around - there should be clues about management nearby.
Save your changes.

If the BIOS is also protected by a password that you do not know, then you cannot reset the password. windows protection with Lazesoft Recover My Password.

Many users, in order to protect their information from prying eyes set an administrator password for their windows account. Some people forget for different reasons installed code protection and that reset windows password carry out the procedure for reinstalling the entire system. And as you know, this business takes a relatively long time.

There may also be problems with saving required files, because we cannot enter the system, and when installing windows, as we know, local disk on which the operating system will be installed must be formatted. Well, of course, you can always find a simpler solution to the problem, this is exactly what this article will discuss and you will find out how reset windows password 7 without resorting to reinstallation.

The only complication is that we need an installation disc or flash drive to work in the command line. If you don't have either one at hand, you can always use your neighbor's computer to download the image and burn it to a disk or flash drive.

How to reset windows 7 password if forgotten

Sticky keys mode, which is invoked by pressing a key five times, turned out to be a loophole for resetting password protection in windows 7 Shift This is exactly what will help us bypass the security code we forgot. The essence of the procedure is that when the sticking mode is called, a command line window will open in which we need to work. And how to do this, read below.

First you need to boot from the installation disk or flash drive. In the first window, click Next.

In the next window, we are interested in the system restore item, click on it.

If you have several operating systems installed, all available ones will be shown in the list, select the one you need and move on.

In the system recovery options window, open the command line.

We enter the command:

copy D: \ Windows \ System32 \ sethc.exe D: \ and press enter.

sethc.exe- file causing sticking mode by pressing the key five times shift.

This command is used to copy of this file to the root of the drive (D: \) (on the system it is the drive (C: \)).

copy D: \ Windows \ System32 \ cmd.exe D: \ Windows \ System32 \ sethc.exe

cmd.exe- the file responsible for calling the command line.

With this command, we replace the sethc.exe file with cmd.exe. Confirm the changes by entering the key "y".

In the password entry window, call the command line by pressing the key five times shift.

We enter the command: net user Andrey 54321 and confirm it by pressing enter.

net user - user selection function.
Andrey - account name (enter your own).
54321 is the new password.

After successfully completing the procedure, enter the changed password and rejoice.

Replacing the command line back with sticky keys

If you are not interested in sticking, you can leave it as it is. To return a call to this mode, read on.

As you can see in the picture below, using the commands entered above, the file sethc.exe moved to the root of the disk. And in the system folder system32, it has been replaced with the command line. Now we need to move it back. You can try just transferring it to system32 and delete the false file located there. But it may not be possible to do this, due to the insufficient number of rights. Therefore, we will use the command line.

We open the start menu, in the search we enter cmd and run the found file as administrator .

We enter the command:

copy C: \ sethc.exe C: \ Windows \ System32 \ sethc.exe

Press enter and confirm with the key " y". If everything is done correctly when you press the key five times shift Again, the sticking mode will open .

Oput your opinion on this article, and of course ask your questions if something suddenly went wrong with you.

Thank you for your attention!

Good day, dear readers and again Denis Trishkin is in touch.

In the latest versions of operating systems from Microsoft, for security reasons, it is possible to set a password to enter the workspace. If this tool is no longer relevant, you can turn it off. I will tell you how to remove the password in Windows 7 in several ways. After all, it gets boring to constantly enter secret characters sooner or later. This is especially irrelevant when only one person works at the computer.

Disable password( )

It allows you to quickly deal with this problem:

That's all. Now when you start the system, you will not be prompted to enter the secret key.

Important! At the same time, if you change your account or go to the lock screen, you will still need to enter the password.

You can remove the annoying function using the standard menu “ User accounts". True, in this way, not a shutdown will occur, but a complete removal. Despite this, Password will not be prompted under any circumstances, even after waking up from hibernation.

To turn off the protection tool, do the following:

That's it, now the system will not ask "stupid questions" regarding security from this area.
Here you can also create a secret combination of symbols.

Interesting to know! Experts recommend that when installing the key, enter upper and lower letters in different languages and also add numbers. In this case, the length must be at least six characters. This is the only way to guarantee at least some kind of security.

Reset network key( )

But what if after connecting the machines, a window for entering the network password appears? Moreover, if it does not exist, confirming an empty string will not lead to the desired result.

The fact is that new security tools are provided in Windows 7, and therefore it is necessary to comply with several conditions for entering at once:

Using the classic setting on all devices.

If all this is done, then you will not need to enter secret characters.

Reset admin password( )

But there is also a safer way - a workaround, which I want to talk about. To do this, you need an installation disc or a USB flash drive with Windows. It is important to note that the operating system must be exactly the same. For example, if the Ultimate version is installed, then it is the same on the portable device.

So, if everything is found and prepared, you can proceed:

We insert the USB flash drive or disk into the computer and reboot to start from them. To do this, you need to set the appropriate settings in the BIOS.

Below we find " System Restore».

A window will appear in which we need " Command line».

increase

In it we write “ regedit"And confirm the action.

A registry window appears. We need a branch " HKEY_LOCAL_MACHINE».

We go to the system drive (most often it is C: \). Next, we go to the directory “ Windows \ system32 \ config \"And select the file" system».

A small menu appears in which you need to enter a name for the new section. It can be anything. Let it be 3333.

On the right side, open the parameter “ CmdLine", Where we enter" cmd.exe "and confirm.

After that we choose “ Setup Type", Where we enter" 2 ».

Now select the newly created section " 3333 ».

We go to " File" and " Unload the bush».

We take out a portable device, close all windows and reboot through a system restore.

After the done work, the command line will appear during OS boot. This is where we can change the password. To do this, enter in the line “ net user user password". We confirm the action. Example command: " net user admin 1111».

In this way, we have changed the password for the user " admin" on the " 1111 ". Now, in the offered window, enter our cherished numbers and wait for the download.

Reset password via SAM file( )

It should be noted that this file does not have a special extension. The point is that it is a component of the registry. It can be found in the folder " Windows \ system32 \ config", Which is located on the system drive.

It is also important to note that this method is considered one of the most difficult. Nevertheless, I consider it necessary to tell it to you. For work we need a special program. At the same time, each step must be performed with extreme caution, because this can radically change the whole process.

We will be using Active password changer. We also need a blank USB stick.

So, to remove the password prompt, you need:

If everything goes as it should, no problems should arise in the future, since only the components we need change in the system area.

The only drawback is that some relatively old motherboards may not support starting from portable memory. In this case, you can use a plastic disc.

Well, as you can see, there are several different ways to remove or change your account password. Moreover, they are absolutely simple, you don't even need to watch the video. By following clearly everything according to the instructions, everyone will be able to open access to the necessary information.

I hope that everyone here will find an option for themselves that will help to cope with the problem. Subscribe and tell your friends about me!

What to do if you forgot your computer password? This guide will tell you what to do if you forgot Windows password and how to fix this problem without reinstalling the operating system. In addition, we will consider other possible problems with passwords. Windows 10 and Windows 7 operating systems have improved security features over earlier Windows XP / 2000 systems.

By the way, perhaps your PC has one of the most frequently used passwords, full list popular passwords see -.

In extreme versions of windows, more than efficient system passwords designed for use in business, so that no one without the necessary authority could not access information on your computer. This is a double-edged sword. Most users forget some important password at least once. And then the user / owner of the information becomes an "enemy without access rights" for his computer.

Naturally, for each protection method, there is a way to bypass it, especially if you have physical access to the computer.

In this article, we will look at various methods to protect your computer with a password and how to bypass them. We will not start with user account passwords, but with equally important passwords such as BIOS passwords.

How to "bypass" the BIOS password?

BIOS password- one of the oldest ways to protect your computer from unauthorized access and one of the most widespread. Why? This is one of the most effective remedies if the user does not have access to system unit... Otherwise, it would be like locking a house with many locks and leaving a window open.

The default BIOS settings on all motherboards do not store password information. So all it takes is to take away BIOS password, - just reset the current settings, restoring the default configuration. But remember that resetting the current BIOS settings will destroy not only the password, but all those settings that you set yourself.

There are two ways to reset BIOS settings. Most motherboards have a dedicated jumper to clear the CMOS (memory that stores BIOS settings). Usually this jumper is located near the battery on motherboard, but for complete confidence, it is advisable to refer to the instructions from the motherboard. On some motherboards instead of a jumper, there are just two contacts, which must be closed with a metal object, for example, a screwdriver, to clear the CMOS.

If your board has a jumper, then to clear CMOS, turn off the computer, set the jumper so that it closes the jumper contacts, and press the computer's power button. Your computer will not start to boot, but CMOS settings will be cleared. Remove the jumper and turn on the computer again. Most likely, you will see on the screen a request to press F1 to set the BIOS parameters. If you are satisfied with the default settings, press F1 and select 'Save and exit' from the BIOS menu. After that, the computer will boot as usual, except for the BIOS password.

If you do not know where the necessary jumper is located on your board, or there is none at all, which is quite possible, you will have to go the other way. Each motherboard has a battery that supplies power to the CMOS memory, allowing information to be stored. Typically this is a standard CR2032 battery.

To clear CMOS, turn off your computer and remove the battery (you may need a thin screwdriver). After 5-10 minutes, replace the battery and turn on the computer. The BIOS will be set to default settings and there will be no password. To continue booting, you will need to press the F1 key, and if you are satisfied with the default settings, select the ‘Save and exit’ item in the BIOS menu that appears.

As you can see, this is all very easy on a desktop computer, but with a laptop, the BIOS password can be a serious problem. Due to the frequent theft of laptop computers, manufacturers made sure that it was almost impossible to gain access bypassing the password. So if you have forgotten the BIOS password on your laptop, most likely you will have to contact service center manufacturer.

What to do if you forgot your Windows password?

If circumstances have developed in such a way that you have forgotten the Windows password, then we recommend that you reset it using the built-in account called Administrator. This is done in safe mode, during boot or reboot of your PC.

To regain access to your computer, you will just need to press F8 and in the menu that has already opened, in which you will be presented with some additional options for loading your operating system, you will have to select the aforementioned " Safe mode". Next, you need to select the built-in account, which, by the way, by default, cannot be protected by any password.

If you did everything correctly, since you exactly followed the aforementioned sequence of actions, while still on the Desktop, you should pop out a window with a message that Windows is running in the "Safe Mode" you need, which is as simplified as possible. You will need to click "Yes" and go to the Control Panel - User Accounts, where there is an icon of the account, the password from which you own speaking and want to reset. On the left, you must select the "Change password" item and enter and then confirm the new password in the corresponding window. Ultimately, for the above changes to take effect, you will need to restart your PC.

How to Crack Windows Password on Computer or Laptop?

In order to do this, you will have to adhere to the following sequence of actions:

Prepare a CD, or a USB flash drive, which should contain a special set of resuscitation programs intended for Windows recovery... You will need to insert it into the floppy drive or into the corresponding port during the next reboot of the computer. You can prepare this package of resuscitation programs yourself by loading programs there that are intended for separating, saving and restoring data, or you can download some, already ready, RBCD 10.0, for example;
During PC startup, in order to enter the BIOS, press the DELETE button. There we will need to change the installation priority and assign the computer to boot from CD-ROM. After that we visit our boot disk into the floppy drive and restart the PC;
Having entered my recovery disk, which should appear after the resuscitation package has been loaded, we must select the edited copy of Windows and go to the "System Restore" mode - the section that will be at the very bottom of the page;
We are looking for the command line and enter "regedit" there (we are looking for it in the dialog settings of the same window). Find, and then select the HKEY_LOCAL_MACHINE section, in which we need to select File, and then Load hive;
Open the SAM file and select the section - HKEY_LOCAL_MACHINE \ bust_name \ SAM \ Domains \ Account \ Users \ 000001F4. We double-click on the F key placed there and go to the very first value in the line, which we will need to replace with the number 10;
In the same section, select "File", and then "Load Hive". Click "Yes" to confirm the unloading of the bush. We close the registry editor, thus ending the installation process, take out a USB flash drive or disk and restart the computer.

How to find out the password from the computer?

The question: how to crack a password on a computer remains relevant to this day. Unfortunately, it is possible to really find out the password from the computer, it seems possible only by correctly selecting it manually. Therefore, if you are not ready to spend a few hours of your free time on this process, we strongly recommend that you just reset it and come up with some new one.

Again, it's much easier to just reset the password and come up with a new one afterwards. Nevertheless, if you just need to find out the password, we recommend that you use a program for this purpose, as they say, from the image of which you will need to make a bootable disk. Correctly setting BIOS boot from the drive and installing this program, immediately upon entering the Desktop, a window will open in which you can see the names of users, including the Administrator, as well as passwords from their accounts.

Asking the question: what to do if you have forgotten the password from your own PC, it is absolutely not necessary to use the above methods of recovering it. Resetting the password in the operating room Windows system 7 can also be produced with Net commands User. To do this, while restarting your PC, you need to press F8. Thus, you can open a Menu that allows you to carry out additional boot options for this operating system, in which you will need to select not just "Safe mode", but one that would also support the command line. While in it, you will need to select the built-in Administrator account and in the Command Interpreter window, immediately after that, the system prompts will appear, where you will need to enter net user "username" "password".

We assume that you yourself understand that instead of "username" you will need to enter the name of your local user account, and instead of "password" you will need a new password. If you did everything correctly, then in order to close the window, you will need to write in the command line: exit and restart the PC.

How to reset Windows 8 password?

In the case of this operating system, things are much easier! Password reset on Windows 8 can be done as follows:

On the login screen, you will need to click on the special power icon, which is located in the lower right corner of your screen;
Next, you need to press the Shift key and click "Restart";
Click "Troubleshoot";
Click on "Reset PC";
Click "Next" and the system will automatically reboot in order to start preparing to reset the password.

How to reset Windows 10 password?

It is not so difficult to reset the password for Windows 10 users, of course, provided that they have access to e-mail, or the same to the phone to which their account was linked. Otherwise, you will have to reset the password from the flash drive, as described above.

How to reset Windows 7 administrator password?

Reset password windows administrator 7 best through the Interpreter Windows commands... Observe the following sequence of actions:

First, launch it. This can be done by following the following path: Start - Run - Run the program - cmd. In the opened menu of the Interpreter of commands, you will need to enter: control userpasswords, after which you will see a window called "User accounts";
Highlight the account the password from which you want to reset and do not forget to uncheck their item "Require username and password";
In the window that opens, you will be required to enter and then confirm a new password. Next, in the command boot window, you need to enter Exit and restart your PC as usual.

View passwords stored by Windows

In addition to access passwords for various Windows users stores a number of others, no less important: the password for connecting to the Internet, passwords mailboxes or access to websites. As a rule, there are a lot of them, so it is quite natural that they are forgotten over time.

The operating system offers an "auto-complete" feature for passwords and other frequently entered information in browsers ( Google chrome, Yandex Browser, Opera (Blink), Firefox, Explorer 11, etc.). So it is not uncommon for a user to enter a password once, but after a few months, of course, he cannot remember it. Everyone understands that important passwords need to be written down, but not everyone does it. And if you don't remember the password, how to find it, because it is displayed as a series of asterisks: ******?

The solution is offered by programs from different manufacturers that can get the password from this string of asterisks. There are quite a few freeware programs for decrypting Windows passwords or hidden passwords from input lines in various browsers.

We will be using a program from Passware. It is an easy-to-use free program that analyzes passwords hidden by asterisks and tells you them. It's very easy to work with her. It is enough to select the line with the password and press the ‘recover’ button.

Of course there are commercial versions programs that, as a rule, have a large set of functions. For example, Password Recovery Toolbox scans the system and determines saved passwords, data saved for auto fill, Outlook Express passwords, Internet connection passwords, etc. This information is then presented in a convenient form. A few more alternatives to the programs described above:, or Password Viewer.

Windows XP user passwords

Windows XP stores user passwords in modified form. For example, the password "password" would be stored as a string like this: 'HT5E-23AE-8F98-NAQ9-83D4-9R89-MU4K'. This information is stored in a file called SAM in the C: \ windows \ system32 \ config folder.

This part of the SAM file is encrypted system utility syskey to improve password security. The data required to decrypt the information after the syskey is stored in the system file in the same folder. But this folder is inaccessible to any of the users. Only the operating system itself has access to it during its operation. The SAM and system files can only be accessed under a different operating system or by connecting the drive to another Windows computer.

Everything Windows versions XP have an "administrator" account. This name gives the user full access to the system and the ability to reset the passwords of all other users. This can save you if for some reason you cannot log in with your regular user password. The specifics of using the administrator password depends on the version of Windows XP: XP Professional.

The administrator password is set during the installation of the operating system. If you wrote it down or just hit enter and left it blank, then you can easily log in as an administrator and reset user passwords. To enter the system in administrator mode, on the system welcome screen, press CTRL + ALT + DEL twice, a window for entering the administrator password will appear.

When the computer boots up, go to ‘start \ control panel \ user accounts’ and change the required password. If you are already here, this good opportunity fix your mistake if you left the admin password blank. It is also advisable to change the name of the ‘adminisrator’ account. Everyone knows this name and is the first to use it to gain access to your computer. To change the name of the account, press right click mouse on ‘my computer’ and select ‘manage’. Expand ‘local users and groups’ and open the ‘users’ folder. Right click on the ‘administrator’ entry and edit it.
XP Home.

This system will not let you just get access to the computer in administrator mode. First, you need to boot your computer in crash protection mode. To do this: restart your computer; immediately after testing the BIOS, press F8 several times; in the menu that appears, select 'start Windows XP in safe mode' (boot Windows XP in crash protection mode). When the computer boots up, log in with the username ‘administrator’. There is no default password. You can now change user passwords by going to ‘start \ control panel \ user accounts’. When you're done, restart your computer in the normal way.
Creating a password reset disk

Windows XP allows you to write information to a regular floppy disk, which provides the ability to reset the password. Naturally, if you have already forgotten your password and cannot access the system, then you will not be able to create any disk, but it’s worth it to create such a diskette in advance to protect yourself from such accidents.

To create a floppy disk: go to 'start \ control panel \ user accounts'; select the name with which you are logged in; in the related tasks menu, select 'prevent a forgotten password'; follow the instructions of the wizard that starts.

To reset passwords using a floppy disk: if you enter the password incorrectly when entering the system, the system will ask, or you have not forgotten it; at this point you should be able to use your floppy disk by following step by step instructions operating system.

Be careful: if you used the built-in Windows capabilities encrypted files and folders, but did not install the operating system update (service pack 1), removing the password will result in the loss of encrypted information.

Utilities for changing passwords Windows XP / 7/8/10

There are special utilities that allow you to edit or reset passwords for Windows XP / 7/8/10 users. Most of them work by loading a minimal version of an alternative operating system, such as DOS or Linux, under which you can access password files.

An example of such a utility can be found at this address: http://home.eunet.no/~pnordahl/ntpasswd/ Operation instructions, as well as files for creating a bootable Linux disk are available on the same site.

Please note that if you used the functions of the operating system to encrypt files and folders, changing the password using any program, you will lose access to encrypted data. In this case, the following method can help, which allows you not to replace forgotten password new, but learn old.

Selection and decryption of passwords

If all else fails, but you have physical access to your computer, then all is not lost. You can overwrite the config and SAM files and try to decrypt the passwords they store using special utilities third party manufacturers. As we already said, for this you will have to use an alternative operating system such as DOS or Linux. And when the files are at your disposal, you can use one of the password decryption programs, for example, LC4 or.

You will need:

Access to another computer.
At least two blank floppy disks.
An archiver designed to work with command line e.g. RAR.
A DOS or Windows 98 boot disk (an image of the required disk can be obtained from http://www.bootdisk.com/) or minimum Linux version(like Knoppix). There is no need for bootable discs if you can simply connect your HDD... If you are using a DOS boot disk and the partitions on your hard disk use file system NTFS, then to access them you will need a program that allows DOS to view partitions in NTFS format, for example, NTFSDOS.
Program for obtaining passwords. We recommend using, as the beta version of this program is free, and free version LC4 is very limited.

Using a bootable USB drive:

If your hard disk has NTFS partitions, copy the NTFSDOS file to your bootable USB stick.
Copy the archiver (RAR) to the bootable USB flash drive.
Boot your computer from this USB stick. If you have NTFS partitions, type NTFSDOS, this program will show you which letter is assigned to your system disk, it will need to be used instead of the letter C in the next paragraph.
Archive system files with passwords. For example, if you use the rar32 archiver, the corresponding command will look like this: Rar32 a -va: \ systemandsam c: \ windows \ system32 \ config \ system c: \ windows \ system32 \ config \ sam If the files do not fit on one flash drive, the archiver will ask you to insert a second one.

Cracking passwords

Each of the programs you select will list the accounts found in the SAM file. Select the ones for which you need to define passwords. If you are using, select Atack type: Brute-force. If you only used numbers in your password, check the ‘all digits (0-9)’ box. Start the password guessing process using the command from the Recovery menu.

Password guessing can take from 10 minutes to several hours, or even several days, and may end unsuccessfully. Especially if the password uses letters in different cases, numbers and special characters.

This good way checking the strength of your passwords. If you just want to check your password, follow the steps above and see how long it will take to find it.

Windows password cracking software

There are a lot of software tools that can help you crack your Windows password. Besides the aforementioned program, there is also Windows Admin Password Hack. But, unfortunately, it can no longer be called actual, since it works only in Windows 2000 / XP. Its closest replacement is MultiBoot 2k10, which is essentially a feature-rich boot disk.

conclusions

In any case, if someone from your loved ones forgot the password for Windows 7, well, or you yourself were forced to face this - do not despair, there are many solutions to this problem. Well, in order for you to no longer have questions: how to crack a password on a laptop, we strongly recommend that you save them somewhere, in notes inside your own smartphone, for example.

We hope you don’t have to resort to the methods we have described. To avoid this need, remember to write down all important passwords. And if there is a real need to protect information on your computer, then use passwords from characters in both cases and numbers and do not use ordinary words. In this case, your passwords will be very difficult to crack.