Installing 1C Enterprise 7.7 on Windows 7. Directory “1Cv77” from the path

With the advent of the new tenth version of the operating system, many are interested in how to install 1C on Windows 10. Although many users have already appreciated the functionality and convenience new system, users software 1C: The enterprise also noticed the fact that programs from 1C create many errors when running on Windows 10. Despite all the positive qualities, Windows 10 is a frankly crude and unfinished system. Specialized software, such as 1C: Accounting, works on this system with malfunctions.

Windows 10 can be installed in two ways:

• Upgrade from version 7 or 8 of Windows;
• Install the system version from scratch.

Regardless of the implementation method, certain problems arise when working with 1C 7.7 and other versions. Therefore, if you decide that the cause of the problems incorrect installation- this is an incorrect conclusion.

Problems when working with 1C on Windows 10

One of the most common errors that occur when working with programs from 1C version 8.3 and others on Windows 10 are crashes, even to the point where the program writes “The program has stopped working.” It is noted that after installing 1C: Enterprise it is completely empty Windows programs practically do not function, and when installed on version 7k updated to version 10, it starts, but there are many minor errors that interfere with normal operation.

Some versions work better on Windows 10, some worse. Therefore, if you have the opportunity, it is better to test your software version for compatibility with Windows 10 and only then update.

The most common errors that may occur when working with 1C on Windows 10:

• Indexing errors;
• Encoding problems;
• Lack of logical integrity check;
• DLL failures;
• OpenConf errors, etc.

If you are unable to solve all the problems that have arisen on your own, then you should seek help from a specialized company. Experienced programmers, engineers and customizers will quickly correct all violations and failures in the system.

Installation procedure for version 8.3

If you still decide to install 1C on the tenth version of Windows, then the installation process itself will be little different from a similar installation on 8 x64. First of all, you need a package to install 1C software. It can be purchased as a software disc or downloaded from a special website.

The resulting archive should be unpacked - usually it unpacks itself, but you can use any archiver program. After that, in the folder where you placed the unpacked files, find the installation file and run it. After launching the installer, you will need to click the “Next” button and start the installation process.

On new page The installer will prompt you to select a pair of suitable system elements that you want to install. You can select all or just some of the following:

• 1C: Enterprise;
• File version, or thick client;
• Thin client;
• Server;
• Expansion modules for the server;
• Translations of the program into different languages;
• Server administration;
• Server for storing all important configuration elements;
• Converter.

Having selected all the files that should be embedded, click on the “Next” button again. On the next page you will need to select the language in which the product will be launched. Click on the “Next” button again.

Transferring 1C from Windows 7 to 10

If you selected Server in the installation components, you will see additional screen to select server settings. Once all the settings have been selected, you just have to click “Install”.

After the installation is complete, the program will give you the option to install a security driver. If you are going to get keys for the program using an emulator, you do not need to install this driver. At this point, the installation process is complete, you can end the process and restart your computer.

The most rational way to get stable operation of 1C software on Windows 10 is to transfer from Windows 7. This is not as complicated a process as it seems. The first thing you need to do is copy all the databases to removable media, disk or flash card. Subsequently, they will need to be transferred to the computer after reinstallation. The location of the databases can be found when starting the program.

After that, start transferring the platform itself. Go to HDD, on which you have the program installed. Usually this is drive C. Find the folder there Program Files and copy it to removable media as well.

Now you can update the system to Windows 10. When the process is completed and you receive a computer with the new OS, you can start transferring 1C back to the computer.

How to implement 1C 7.7 during migration?

First, copy the databases to your PC. Don't forget to remember the exact path where you copied them. After that, go to drive C to the Program Files folder and copy the previously saved 1Cv77 folder there. In this folder, look for a subfolder called BIN. In it, find the file 1cv7l.exe, create a shortcut on your desktop and run it.

When you open the program, it will be empty. To find the databases, click Add and navigate to the location where you placed the databases. When you find the desired folder, click OK. After this, you need to launch 1C 7.7 in configurator mode. In “Administration”, find the item “Code page of information security tables” and select “+current system installation" Confirm the action and wait a bit. The program will start in normal mode and work as efficiently as possible.

Working with a new system like Windows 10 is fraught with problems. Installing 1C on it and using it is much more difficult than on Windows 2000. If you are not ready to face such problems, then do not rush to switch to Windows 10 and wait until all the problems are resolved.

It is known that the 1C:Enterprise 7.7 platform has compatibility issues with 64-bit systems Windows family(XP, Vista, 7, Server 2003, Server 2008). What to do if you still need to run this software on a 64-bit operating system? Next we will look at the solution to this issue.

The essence of the problem lies in the very outdated architecture of the 1C:Enterprise 7.7 platform (it’s time to bury it!). With the idea of ​​installing on 64-bit operating system using setup.exe you need to leave immediately. It won't work.
You should do this:

Step 1. Install the 1C:Enterprise 7.7 platform correctly (i.e. in accordance with all books and instructions) on a 32-bit operating system. It is better if it is not a server operating system (so as not to fight with possible problems ahead of time).

Step 2. Copy folder C:\Program Files\1cv77\BIN from a 32-bit system to a folder C:\Program Files (x86)\1Cv77\BIN 64-bit system. Make appropriate shortcuts to the 1cv7.exe (or 1cv7s.exe) file on the user’s desktop.

Step 3. (Step for Windows server operating systems) Add exception to DEP. For this we will open Control Panel –> System–> Tab Additionally

Click on the button Options. A window opens Performance Options. Open tab Data Execution Prevention.

When you first open it, the list will be empty. You should press the button Add and select files 1cv7.exe(or 1cv7s.exe). After this you can accept the changes.
Disable DEP (select option Enable DEP for major programs and Windows Services ) not worth it. The purpose of DEP can be found in the footnote below.

Data Execution Prevention (DEP) (English) Data Execution Prevention) is a security feature built into the operating system familyWindows, which does not allow the applicationexecute code from a memory area marked "data only". It will prevent some attacks that, for example, store code in such an area using a buffer overflow. DEP operates in two modes: hardware, for processors, which can mark pages as “not for code execution”, and software, for other processors. This feature first appeared in Windows XP Service Pack 2.

Step 4. Install drivers for HASP key. You can find drivers for the HASP key for the 64-bit version of Windows on the Aladdin website.
The following drivers should be used:

• Drivers for the key HASP Device Driver 5.22;
• License Manager (for the key to work on the network) HASP License Manager 8.32;

Step 5. Defeat remaining problems in case using Windows Vista/7 and Windows Server 2008/2008 R2. You can read about what needs to be done in my post.

ATTENTION! SEVERAL FEATURES!

After publishing this post, I encountered an unpleasant feature. I got my hands (almost simultaneously) on two laptops with the Windows 7 x64 operating system installed. It turned out that single-user version 1C:Enterprise 7.7(in my case the configuration was Accounting) DOES NOT WORK on a 64-bit operating system. No matter what I did, the protection key did not give up and tried not to be detected. Alas, software platform 1C:Enterprise 7.7 is old and problems like this will never be fixed.

However, during the experiment, it was possible to establish that in the case of using a multi-user license, working on a computer with installed Windows 7 x64 in 1C:Enterprise 7.7 is possible and everything written above is absolutely true. It is advisable to choose a computer with a 32-bit operating system as a place to place the security key.

The described case can become a serious problem for system administrators when switching to new equipment. I am inclined to believe that in each individual case it is necessary just test one way or another.

We are often asked the question of whether 1s 7.7 will work on a new computer and how to transfer it there. Everything is not as complicated as it seems. First, let's copy the 1c 7.7 databases that need to be transferred to removable media. new computer. You can find out the paths to the databases when you launch the 1C 7.7 shortcut.

We start a new computer and copy the databases to the location that you have designated for them and remember the path.
Go to system windows partition(drive C) then Program Files (x86) and copy the 1Cv77 folder here
Next, go to this folder and find the BIN folder
in it we look for the executable file 1cv7l.exe.
Create a shortcut for it on the desktop and launch it.

Now we are empty here, so we will show the platform where the bases are. Remember I said to remember the path to the 1C7.7 databases? Now we need to get to it. Click add, name the database and go to the storage location of the 1c database by clicking on the three dots. You just need to go to the folder with the database and click OK.

When starting the database for the first time, the following error may occur:
but don’t be discouraged, let’s launch the 1c 7.7 database in configurator mode.

Next, go to “Administration”, then “Code page of information security tables”, select “+ current system installation”, click OK.
Even if when you open it you will already have “+ current system installation”, still click OK. A dialog box will appear. Click yes. We wait. The entire database is ready and we launch it in “Enterprise” mode. All bases work. But the following situation may arise

We need to find the V7Plus.dll file. You can try via search. Most likely it is stored in your database. So it needs to be moved to the BIN folder from which we created the platform shortcut. Now we need to register this library. To do this, you need to create a shortcut to this library on your desktop. Let's click right click mouse over it and go to properties. In the object field we enter “regsvr32”, click apply and OK. Be careful not to erase the quotes! Our label took on the following form. Now we run as administrator (right-click "Run as administrator") and the entire library is registered. We have fixed this problem.

If you encounter other types of errors during the transfer, please write in the comments. We'll figure out

Installing 1C:Enterprise 7.7 on x64 bit Windows is fraught with some difficulties. The fact is that you won’t be able to install 1C through a regular installer, even if you run the program in compatibility mode. But in our life nothing is impossible. Therefore below is step-by-step instruction for installing 1C:Enterprise on x64 bit Windows, in my case it is Windows 10.

1. Installation on Windows x32

First you need to install the required 1C:Enterprise platform on any other 32-x (x86) bit Windows system by changing the default installation path to “ C:\Program Files (x86)\1Cv77\"(so that all shortcuts work). Then you need to copy the following files to the 64-bit system:

1. Directory " 1Cv77» out of the way

   « C:\Program Files (x86)\» 32-bit system in

   « C:\Program Files (x86)\» 64-bit system.

2. Directory " 1C Enterprise 7.7» out of the way

   « C:\Documents and Settings\All Users\Main Menu\Programs»

   on a 32-bit system

   « C:\ProgramData\Microsoft\Windows\Start Menu\Programs»

   64-bit system

   (Paths may vary depending on the versions of Windows used).

3. Copy file from path

   « C:\WINDOWS\system32\» 32-bit system in

   « C:\Windows\SysWOW64\» 64-bit operating system.

1. ShutdownDEPfor the 1cv7.exe process (for server OS)

Next, you need to exclude the 1cv7.exe process from the DEP check; to do this, go to the system properties (“ Start» - « Control Panel» - « system and safety» - « System") and select " Advanced System Settings» .

In the window that opens " Properties of the system"go to the tab " Additionally" and go to " Options» performance.

Next, go to the “ Data Execution Prevention", press the button " Add" and select the file " C:\Program Files (x86)\1Cv77\BIN\1cv7s.exe" which we copied in step 1.

1. Installing protection drivers

Now you need to install the protection drivers. 1C:Enterprise uses the HASP hardware and software protection system from Aladdin Knowledge Systems Ltd. To run all protection modules you must:

Fixing the error "The sort order set for the database is different from the system one!" if such an error occurs when starting 1C:Enterprise.

1. Launch 1C:Enterprise

That's it, the installation of the 1C:Enterprise platform is complete. To launch, you can use the shortcut located along the path “ Start» - « All programs» - « 1C Enterprise 7.7» - « 1C Enterprise". You can also add a shortcut to launch 1C on the desktop for all users by copying it to " C:\Users\Public\Desktop"(paths may vary depending on the Windows versions). Further work with the 1C system is similar to work in 32-bit Windows.

Installing the 1C:Enterprise 7.7 platform on a 64-bit operating system is fraught with some difficulties. The fact is that you won’t be able to install 1C through a regular installer, even if you run the program in . But nothing is impossible. Below are step-by-step instructions for installing 1C:Enterprise on 64-bit Windows, in my case it is .

1. Installation on Windows x32

First you need to install the required 1C:Enterprise platform in any other 32-bit Windows system by changing the default installation path to " C:\Program Files (x86)\1Cv77\"(so that all shortcuts work). I wrote in detail about installing 1C. Then you need to copy the following files to the 64-bit system:

1. Directory " 1Cv77» out of the way
   « C:\Program Files (x86)\» 32-bit system in
   « C:\Program Files (x86)\» 64-bit system.
2. Directory " 1C Enterprise 7.7» out of the way
   « C:\Documents and Settings\All Users\Main Menu\Programs»
   on a 32-bit system
   « C:\ProgramData\Microsoft\Windows\Start Menu\Programs»
   64-bit system
   (Paths may vary depending on the versions of Windows used).
3. Copy file from path
   « C:\WINDOWS\system32\» 32-bit system in
   « C:\Windows\SysWOW64\» 64-bit operating system.

Did this article help you?