Micro SD is protected from recording what to do. How to format a flash drive, disk is protected from recording. What you need to know to unlock the removable storage medium

It happens that the data carrier "does not allow itself to format", and the system reports that it is protected from the entry, although the card or flash drive does not have the corresponding switch (or the protection is disabled). You can read the data stored on the media, but you will not be able to delete them in any way. In other cases, the system allegedly removes files without any problems, but, in fact, they do not disappear.

Below are two ways to help you unlock protected media and formatting it. Have, however, in mind that, perhaps, they will not bring the expected result.

In case of damaged carriers, any formatting attempts may be ineffective. Then it remains only to acquire a new medium and copy all the resources on it.

Protected media - unlocking through the registry

If within the section Control No subsection "StorageDevicePolicies", create it by clicking right-click Mouse and select item Create → Section. Make sure that the name correctly specified. Select the right-click section, select Create → Parameter DWord.. Sit down the new value of the WriteProtect name and assign it to the number 0 in the field Data values. Confirm the OK button, close the registry editor and reboot the system.

If the described method turns out to be ineffective, try to execute the following advice.

Delete blocking program diskpart

Connect the USB drive to the USB connector, then call the console. Enter for this cmd.exe. In the Start menu search box, right-click the found item and select the command. Run on the name of the administrator. Administrator rights will allow you to avoid a message Access denied.

Then enter sequential the following commands, confirming each press of the Enter key.

diskpart.

lIST DISK.

sELECT DISK X. (x - means the drive number assigned to the used uSB memory - Determine this number on the container of carriers included in the list)

aTTRIBUTES DISK CLEAR READONLY

cREATE PARTITION PRIMARY.

format FS \u003d FAT32 (You can apply the option nTFS instead fAT32.If you are going to use media only on Windows computers)

Problems with flash drives are known since their appearance, it is the impossibility of formatting, blocking recording to the drive, the appearance of incomprehensible errors. Today we will analyze the case when the flash drive is protected from recording, by the way this solution may later help with.

Suppose you wanted to throw something on the USB flash drive, that is, to record information, when trying to do this, a message of this type may appear: "Disk is protected from recording, remove or use another disc."Or just that the disc is protected from the entry. This problem is solved in several ways than we now and we will deal with.

The flash drive is protected from writing how to remove protection - options?

In general, there are two ways to remove protection, software and hardware. The hardware method can be used not on all drives, but only on those where there is a special switch. For example, it is on Cardriders for SD cards on the side, there will be an inscription "Lock". As you can see everything, you just need to switch the lever.

Software. I think you are also clear. To unlock flash drives we will use staten tools Windows, for example, command line, or third-party programs.

How to remove the protection from writing from a flash drive using the registry?

Go to the main process. The first option is to use. To enter it, we open the window "Run" Using keystrokes Win + R. and enter the team there regedit. . Another option, in the search, enter "REGEDIT" and in the results, open the registry on behalf of the administrator.

Now we need to go to the STORAGEDEVICEPOLICIES section. It is on the way: HKEY_LOCAL_MACHINE \\ SYSTEM \\ CURRENTCONTROLSET \\ CONTROL \\ STORAGEDEVICEPOLICIES

By the way, how to quickly go to one or another branch I have already spoken.

If you did not find this partition there, create it. To do this, click on the previous section "CONTROL" And choose "Create", later "Section" And name it StorageDevicePoliCies..

Now, B. this section We must create a parameter DWORD (32 bits), do the same too. This parameter is name WriteProtect..

Press the created parameter twice and make sure that it is equal to 0, if not, then change it to zero and save.

After that, you need to exit the registry, pull out the flash drive and restart the computer. When loading the system, insert the flash drive again. Now you can record any information on the USB flash drive, since the protection is disabled.

If this option did not work, go to the next one.

Remove the protection from the flash drive using the command line

Another program solution solution is to use the DiskPart command on the command line.

Open the command prompt on behalf of the administrator, for this in Windows 10 you can right-click the software and select the appropriate item, or enter the CMD in the search and open on behalf of the administrator.

Next step - We enter the command on the command prompt diskpart. and insert enter lIST DISK. .

Now you need to understand what number has a flash drive. The easiest way to understand it in volume.

Once you have figured out, what number belongs to the desired flash drive, you need to enter the command on the command prompt sELECT DISK. "Flashki number » That is, if the flash drive would have number 1, then the team would look like this: sELECT DISK 1..

Thus, we chose the desired disc, then, clean the attributes, for this we enter the command aTTRIBUTES DISK CLEAR READONLY .

If you have the task format the drive, then first enter these commands:

• clean.- Cleaning
• cREATE PARTITION PRIMARY. - Create a section
• format FS \u003d NTFS - format in NTFS format
• If you format in FAT format, the team will be like this: format FS \u003d Fat

About the read attribute is written in the article -. If it is interesting how to use it for disks and sections, then read.

Remove protection using the Local Group Policy Editor

I will immediately say that this utility is contained only in professional windows versionsFor example, in Windows 10 Pro or Windows 8 Pro. In the home editors you will not see this.

To enter the Group Policy Editor, you need to press a combination Win + R. and in the window that opens, enter the command gpedit.msc..

In the editor window, we must go to the next section: Computer configuration - Administrative templates - System - Access to removable storage devices. We find the parameter there " Removable discs: To prohibit the record ", if it is in the" Enabled "state, then disconnect.

To do this, you need to click on this parameter twice, the window will open, where we set the checkbox to position "Disable"and then click "OK".

Flash drives (USB-Flash) and SD cards (MicroSD) are small-dimensional devices that can accommodate a significant amount of gigabytes of information that came to replace the discs. It would seem that there will be no problems with flash drives and maps, but when recording it may turn out that the storage device used is simply blocked, and it is impossible to write new information on it.

The installed recording from the recording from the flash drive is pretty a frequent problem facing ordinary users. With such a situation, any person who uses her for the first time or should he be temporarily use the flash drive, for example, reset information on someone else's memory card. This problem is often rapidly solvable, which means that there are no reasons for panic.

Before considering all the ways to help remove the blocking, it is worth paying attention to what this blocking on the flash drive and the card is installed.

Important! The main reason for the locking is to protect the drive from virus programs. There are viruses that can be copied independently.

To solve this problem, there are 2 main methods - software and hardware.

Disable the lock by changing the switch position

If you pay attention to the flash drive or SD card, you can see that a small switch takes place. They have no longer than 5 mm. and translated from one position to another literally nail. it hardware method Lock.

Some manufacturers make a mark next to the switch so that the user can understand whether the blocking is turned on or not. Mark is represented by an image of open and closed locks. The position of the switch can be changed any number of times.

Software removal from flash drive

As for the second method, that is, the software, it also implies the installation and removal of blocking with operating system. It will be necessary to install a flash drive or SD card to the computer, and use the registry editor or command line. All methods should be considered in detail.

Removing the storage flash drive using changes in the computer registry (Windows settings)

• 1. First of all go to the "Start". Enter the regedit in the search field. Now you will need to go to the "Startup on behalf of the administrator" item - this is done by clicking on the right mouse button;

• 2. In the registry window that opens, you need to find the section "StorageDevicePolicies"
  You can get on it by clicking on the line at the following to the address (you can use the search for the registry, in the Edit tab): HKEY_LOCAL_MACHINE \\ SYSTEM \\ CURRENTCONTROLSET \\ CONTROL \\ STORAGEDEVICEPOLICIES

It is possible that the partition may not be available. In such a situation, you will have to create it. It is done simply and quickly. Click on the Control section, after clicking "Create" and then "Section". We assign a new name: StorageDevicePoliCies.

• 3. Now you need the DWORD parameter (32 bits), which is also created independently in the new registry branch. Give him a name - WriteProtect..

• 4. WriteProtect must be 0. Click on a new parameter, click on "Edit". Most likely, the user will detect "1" in the window that opens. Unit erase and put "0" instead. Ends all by pressing the "OK" key.

• 5. The editor can now close, and get the drive. It remains only to restart your own computer and insert a drive again. If everything was done correctly, the files will be easily removed on it.

Removing protection using the command line, DiskPart parameter

There is a command interpreter DiskPart, which will also help unblock the flash drive or SD card. Its assignment is to manage partitions and discs using commands.

• 1. Click "Start". Write a word CMD on the command prompt. Click on the right mouse button and click "Run from the administrator."

It is possible that the drive should be formatted. Specify the command "Clean" command in the command prompt, after creating the "Create Partition Primary" section, complete deleting data to NTFS "Format FS \u003d NTFS" or FAT "Format FS \u003d FAT".

Removing the protection from the flash drive using the Local Group Policy Editor

• 1. Open the editor - do it just: press at the same time two "Win" + "R" keys. In the group that appears, enter the gpedit.msc command. Include it in the work by clicking OK.

• 2. It will be necessary to be in the "Removable Discs: Disable Reading" section. This will be done by opening the editor and the "Computer Configuration" branch - "Administrative Templates" - "System" "Access to removable memorable devices" and here, on the right, will need section. It is possible that the parameter is involved and simply turn it off.

3. Press the right button by parameter. A window will open where you want to click "Disable", and confirm the action.

Each of the specified methods was used, but it was not possible to achieve the desired result. See who is the manufacturer of the product, and go to his official website. There will definitely be utilities for working with a flash drive or SD card.

Unfortunately, the USB flash drive and the card have their own data overwriting. If he has been exhausted, then erase information from it will not be possible, as well as write. We will have to spend on a new flash drive or map.

Reading time: 45 min

The use of a drive for editing on it does not always proceed successfully, sometimes uSB flash drive is not formatted protected from recording. Formatting and any other manipulations associated with changing information on the media will be blocked, and the flash drive turns into a regular CD / DVD disk. The problem is known for a long time, so solutions are already worked out and reliable.

Note, the only decent application of the protection of the flash drive from recording is its protection against viruses, which without the knowledge of the user migrate through the system and amaze all new sites.

Not formatted flash drive: What to do?

The very first stage in solving the situation, when the USB flash drive is not formatted - it is to check the physical state of the drive. In some Flash drives there are blocking with the help of a traveler, the same applies to microSD cards. The toggle switch may be on one of the ribs of the carrier. To eliminate the prohibition, it is necessary to transfer the lock to the Open or Lock position, it is done with something hard or nail, as the toggleer is quite small.

Most likely, the lock was turned on by chance, so before further connection the drive, it is worth checking the correctness of its installation.

Another frequent problem is the software blocking of the recording that is installed at the level of the drive microcontroller. For normal operation, you need to unlock a flash drive, which can be made with built-in Windows tools.

The flash drive is not formatted - the recording disk is protected. Unlocking through the registry

A more common reason why the flash drive is not formatted is a software sphere. To eliminate the prohibition, you need to perform some manipulations with the registry.

1. Press Win + R and in the window that opens, enter the REGEDIT, the editor will be called with administrator rights;

1. Then you need to go to the HKEY_LOCAL_MACHINE branch and select the System folder;
2. In the CurrentControlSet - Control section there is a necessary StorageDevicePolicies folder. In some systems, the item may be missing, in this case you have to simply create it by clicking on "Edit", activate "Create" and select the section "Section". It is important to name the folder in accuracy of StorageDevicePolicies;
3. Next, in the selected section (in the window that on the right) you need to click on the right mouse button and "Create", then select "DWORD parameter (32 bits)" and call WriteProtect;
4. Next, double clicks need to open the created parameter and check the value must be 0 if the unit is installed, you need to replace it and save changes;

1. At the end, you need to close the registry, remove the drive and restart the PC. After re-connection, everything will work correctly.

Removing protection with diskpart

The following way, how to format the USB flash drive, if it is not formatted is to use the DiskPart command function. This interpreter is used to configure and receive information about sections.

In our case, it must be used like this:

1. Click on "Start";
2. In the search string, enter a combination of CMD;
3. PCM on the result and launch with higher rights;
4. Then in the console, enter diskpart and click on the input;
5. Next, enter List DISK and press ENTER. Here you need to determine the number of the drive with which we will interact, that is, flash drives. The easiest way to determine the desired section is to look at the size that is slightly less specified on the volume flash drive;

1. Now you need to select a disk using the SELECT DISK 2 command, where the number indicates the individual, just revealed;
2. To clear the attribute that blocks recording, you need to enter the "Attributes Disk Clear Readonly" command;
3. The flash drive must be formatted using the standard "Clean" command;
4. You need to create a section using the CREATE PARIMARY command;
5. At the end, install the standard file System NTFS / FAT, which is performed by the "Format FS \u003d NTFS" command, to edit the FAT you need to replace NTFS on the FAT command.

Elimination of protection using the Group Policy Editor

An alternative method of solving a problem with inaccessible formatting is as follows:

1. You must press the combination of Win + R and enter the name of the GPedit.msc service, then ENTER;
2. Next, you need to open a branch with the name "Computer Configuration";
3. Then choose "Administrative Templates";
4. Next, open the category "System";
5. The ultimate goal is "access to removable devices";
6. It is necessary to deactivate the "Removable Disc: Prohibit Record" parameter, for this twice click on the option and in the new window on the left to set the position to disable.

Additional options

If the problem was not eliminated in one of the listed ways, it is worth trying to find the source of the official manufacturer, it is likely that there is some specific function in it. Make it easy simply by going to the manufacturer's website.

Some users configure the situation of a secure drive and a separate file. Probably the problem is not in the flash drive itself, but some separate file Blocks formatting. It is necessary to look at the error window if a specific file is specified, you need to remove protection from it. Perform an action is quite simple - the PCM on it and select "Properties", then click on the Safety tab and remove the allocation from the reading only.

Important! Before formatting, you need to correctly install the file system into which the flash drive will be translated. The most common types - FAT and NTFS, in the first case the volume of the drive will not exceed 4 GB, regardless of its actual size, and in the second case, the set volume will be maintained.

After all, you need to choose fast or full formatting, the first option is faster and less frequently shown errors, and the second is more qualitative.

Sometimes it is not possible to eliminate the problem at all, since the flash drive simply cannot be used more due to the fact that the resource has been exhausted. Each device has a limited number of overwriting cycles when this resource is exhausted, the flash drive automatically becomes readable only.

Sometimes there are cases that it is impossible to format a USB flash drive or an SD card, transfer or record data on them. Windows system gives an error message " The disc is protected from recording. Remove the protection or use the other disk"Many devices go with a lock lever on the flash drive itself. Make sure the lever itself on the SD card or flash drive is set to" unlocked"Unfortunately, in some cases, devices may be damaged physically, which will buy new. If you are sure that you are all right: unlocked lever, the device has not been physically shock, then consider ways to renovation of drives and try to remove the protection From recording from flash drive and SD cards.

How to remove the protection from writing from an SD card, flash drive or disc

Error when SD card, flash drive or disk is protected from recording, it can be technical and nothing will help. But it happens a lot of cases when malware can change the parameters in the registry and block the formatting of the flash drive. Also use special utilities From flash drive manufacturers to help correct the error if it is a regular software failure.

Note: If there is a physical formatting block, then check the lever on the flash drive or the SD memory card, most likely it is blocked.

1. Using the registry

Press the button combination Win + R. and enter regedit.To enter the registry editor.

Go along the way:

• HKEY_LOCAL_MACHINE \\ SYSTEM \\ CURRENTCONTROLSET \\ CONTROL \\ STORAGEDEVICEPOLICIES

If you do not have a parameter StorageDevicePoliCies., Create a section called StorageDevicePolicies by clicking Right-click on the folder. CONTORL. If there is a value, then see below what parameters should be.

Go to the StorageDevicePolicies created folder, highlight it, and with the right click on the empty field right-click and Create > DWORD parameter (32 bits). Write a new name WriteProtect., then click on it twice with the mouse to open properties, and set the value 0 . Restart the PC and check whether you make an error that the disk is protected. If a this method did not help, then move on.

2. Using CMD

Insert the FLCHEK or SD memory card into the computer's USB port and run the command prompt on behalf of the administrator.

Enter the following commands:

• diskpart. - Start the tool to work with discs.
• lIST DISK. - Shows which discs are connected to a computer. Flash drive in my case is located Disk 1. Sizes 7640 MB.
• sELECT DISK 1. - Where 1 This is the disk number, which is shown above. Disk 1. In my case, this flash drive.
• aTTRIBUTES DISK CLEAR READONLY - Clean the attributes of the flash drive.
• clean. - Clean the flash drive.
• cREATE PARTITION PRIMARY. - Create a section.
• format FS \u003d FAT32 - format in FAT32. (You can change fAT32. on the nTFSIf you use a USB flash drive only on Windows systems.)

3. Using Group Policy

Click win + R. and type in the string gpedit.msc..

Follow the following paths: Computer configuration > Administrative templates > System > Access to removable storage devices. With the right to find items " Removable discs"I. disableBy pressing twice the desired line - recording, reading, execution, if included.