Why in headphones noise is heard. How to remove noise, interference or cracking in headphones. Maximum volume level

When you install the connection of peripheral devices with a PC, carefulness and attention should be done, because the complexity of the headset complicates the connection process. The same speakers are very often connected by sound recording and headphones. These components are extremely comfortable for communication on the Internet. Without these devices, it is difficult to imagine a modern user. In fact, the connection is not so difficult to carry out if there will be no problems during it. The same users very often ask the forums Question: Noise in headphones on a computer - how to remove? In order to facilitate life, we recommend that you familiarize yourself with detailed information about this theme.

Where does noise come from?

First you need to understand where this noise comes from at all, because many "users" are familiar with this problem. Often this problem occurs only for a while, but some will not get rid of it for a very long time. We will open the secret that the nature of this problem may have a different start. Noise can appear for a variety of reasons, so it is very difficult to predict exactly which measures will be returned. Problems can be caused by settings or technical malfunctions.

How to remove noise in headphones? To eliminate this problem, you need to designate the roots of the problem.

Sound fee

Start, perhaps, it follows from the components within a stationary personal computer or laptop. A sound processing card may be simply damaged or new equipment does not want to work with it. In the headphones "indignation" can manifest itself in the form of noise and cod.

Fit all this can only be corrected using a complete replacement or repair of the card in the service center. Perhaps it is after these measures the noise will disappear.

Land

This reason is difficult to call common, but it should not be excluded from the list. Speech here is exactly what we feed our headset. In this case, extraneous sounds may also occur.

Important! If you work with a laptop, then it is not a fact that the components on motherboard have grounding. In the case of its absence, it is necessary to think about replacing parts or simply accept unpleasant consequences.

Why do the fountain speakers on the computer and how to remove this background? It may be not only in those devices that everyone thinks.

Third party equipment

Sound output devices can even be hiped due to connected devices. There are no malfunctions in this case. In other words, you can sharply appear monotonous noise during the mouse connection.

Important! Also, this problem may occur when the keyboard is connected.

Noise is due to the following reasons:

• During the conjugation, active data transmission on the PC occurs. It is recommended to avoid the operation of the USB ports, with which you have problems. It is best to use other interfaces for connecting or think about repairs.
• USB port is damaged. Here it is also perfect for repair, but in practice, users simply begin to use other ports. The problem is not of great relevance, because it arises not very often.

The wire

How to remove noise in headphones in other ways? Perhaps the problem lies in the model of the headset used. Absolutely all headphones are divided into:

1. Wired devices. The connection is based on the cable.
2. . The connection is based on a wireless communication module.

Software

This factor is key to all computer devices without exception. In practice, of course, such cases are found not so often, but it is better to check everything from all sides. Outsided sounds When operating may occur due to irrelevant sound Drivers Or their absence at all. To exit such a position it will be necessary to reinstall software To ensure the normal health of the headset.

Maximum volume level

The background may interfere with the wrong sound settings. It does not matter at all, you use the microphone or not.

Important! Use tips from our post to.

If all the parameters are set on the maximum values, that is, the risk to hear the screens and wheels. You can correct the situation only when the volume level is reduced. This action does not cover anything complicated.

Question from the user

Hello.

I have a problem with PC: from columns and headphones there is some kind of extraneous noise (reminds of a crack). Tyrkal wires - did not help; The entrances also rearranged - the problem was not gone. By the way, if you click on the mouse - then this noise is slightly enhanced. What to do?

The sound card is built-in, Realtek (I do not know the exact model). Headphones are new, the very usual columns, the truth is already quite old (7-8 years old).

Good day!

In general, the noise encountered in the columns and headphones can be a great set: for example, the noise of the wheel from the mouse, various cracks, whistle, intermittent and trembling noises, etc. They can appear from a variety of reasons.

The user's problem described above is quite typical (unfortunately), and it is not always that it is so easy and quickly eliminated. Nevertheless, in this article I will try to bring all the most important points to which you need to pay attention to first. By eliminating them, with a lot of probability, you will make your sound better and cleaner.

If you have too quiet sound - Try tips from the following article.:

If you have not at all sound On the computer - I recommend to get acquainted with this manual:

Causes and elimination of outsided sound in columns and headphones

Cable for connecting columns / headphones

1) if the cable is

Many do not give it values \u200b\u200b(allegedly, what will happen to him), and the cable, by the way, can be damaged by chance: with an inack-over movement of furniture, having rebuilt, occurring heel. In addition, many in the house have pets. In general, the reasons are enough and without your direct intervention ...

The photo below shows a damaged audio cable ...

2) broken audio connectors

Over time, any audio connectors begin to "weaken" (most often from intensive use) - and the plug in them is not clamped up tightly, sometimes there is even a small backlash (gap). If in this case try to insert / remove the plug, twist it in the nest - you can notice how noise will appear in the columns and how they will disappear. Thus, it is possible to choose this position of the plug, in which there will be no noise. The cable in such an ideal position can be fastened with scotch.

In general, if the problem with broken nests - replace them in the computer. Service, the question is not too "dear."

3) Cable length

I also want to pay attention to the length of the cable. If a speakers are 2 meters from system Block - The use of 10 meters long cables - unreasonable (especially if there are some adapters, extension cords). All this can cause a "distorted" sound, a kind of interference. In general, cables are more than 2-5 meters long (in the most common situations, for the household) - I do not recommend using.

4) Lee recorded cable

Another reason for which I had to face was as follows: the cable from the system unit to the speakers was on the "weight", about 2 meters long. Naturally, if the window in the room was discovered, then the draft was forced to "hang out" this cable and extraneous noises were observed.

It was very easy to get rid of the problem: with the help of an ordinary scotch, the cable was attached in 2-3 places to the table and noises disappeared.

By the way, the cable can also hurt passing people (if you are not very convenient than PCs), pets, even your own legs (if the cable is under the table). Therefore, my advice: Secure (fix) or pave the cable so that no one has threw it randomly.

The photo below presents special holders / clamps that exclude "confusing" cables and exclude that some wires will hang out. Such holders on velcro can be placed on the back of the table and consolidate all the wires and cables. Instead, by the way, the usual tape can be used.

5) Front and rear audio connectors

Another important moment: If laptops have only one audio connector (usually on the side panel), then the system unit 2 (most often): on the back of the block, and in front.

Many users are more convenient to connect headphones (sometimes speakers) to the front side of the unit - and often in this case the sound is not as high-quality, as if you were connected to audio connectors on the rear wall of the system unit. It is connected with adapters, extension cords, etc. Moments with the connection of the front panel (from the back of the same system unit - the audio outputs are "directly" from the sound card).

In general, the motive of this board is simple: try connecting headphones / columns to audio outputs on the rear wall of the system unit.

6) Does the cable with other cords are not intertwined

Also to phoning and emerge foreign noises in columns may be due to the fact that the audio cable will be too "closely" to intertwine with other wires. Try it to gently arrange it so that it is away from the rest. By the way, this Council intersects with the fixation of the cable (see a little higher).

And another advice: If you have hissing and noise in the speakers - try to connect headphones instead (or vice versa) instead. This will not solve the problem, but will help you find and diagnose the cause. If there will be no noise in the headphones, then probably the reason lies outside the system unit (which is already something ...).

Incorrect sound settings in Windows

Frequently extraneous noise in columns are associated with not very "correct" sound settings in Windows. Therefore, I recommend trying to change them ...

To do this, open the panel. windows management by the address: Control Panel \\ Equipment and Sound .

It will show a few of your audio devices. Open the properties that sound the default sound (such a device is marked with a green check mark).

Note: By the way, if the default device for sound playback will be chosen incorrectly, then you will not be heard the sound.

When you open properties of speakers (Default Playback Devices) - Check the "Levels" tab (see Screenshot below). In this tab, reduce all extraneous sources to a minimum: PC Beer, CD, microphone, line input, etc. (Their number and availability depends on your computer configuration).

Next I recommend to open the tab "Improvements" and see whether "Toncompensation" (By the way, in some versions of Windows it is called like " Additional Features / Volume Alignment ").

Save the settings, and check whether the sound has changed, whether it has become cleaner.

Lack of current audio driver / driver configuration

In general, usually, when problems with drivers - there is no sound at all. But modern windows version (8, 8.1, 10) Install drivers automatically. There is nothing wrong with that, on the contrary, simplify the life of novice users. But there is one big "but" - the driver you are installed, usually cannot be configured, i.e. There is no extra. panels where you specify important parameters For your equipment. As a result, certain sound distortions may occur.

To not repeat how to check if there is an audio driver in the system, how to find it and update how to remove the old driver, etc. - I recommend to get acquainted with this article:

You can also use programs for automatic update Drivers in the system. I talked about them in this article:

I recommend to pay attention to the configuration of the driver itself. To open the audio drivers settings: go to the Windows Control Panel to the section "Equipment and Sound" . Next below the window, usually, there is always a link to setting: In my case, it is "Dell Audio." (In your, for example, it can be REALTEK AUDIO).

In the audio driver settings, check the volume of the main devices ("go" with it), turn off various "incomprehensible" improvements, filters, etc. Very often they are the cause of all kinds of sound problems.

Check columns on another PC

If the above recommending effects did not give, I highly recommend connecting your speakers or headphones to another device: laptop, TV, PC, etc. It is necessary to do this in order to determine the source of the outside sound:

- either it is "to blame" columns (if there will be sound with noise on other devices);

- either "to blame" the system unit itself (if the speakers will normally behave, when connected to other sound sources).

The reason may be in the ground ...

Grounding (Sometimes called rewarding) In ordinary residential buildings, most often, are made in the basement. All sockets in the building are connected to this grounding. If all equipment (including columns) is connected to one outlet - then problems with interference due to grounding, usually never occur.

If the cause of noise is associated with grounding, The easiest way to get rid of it is to connect all equipment to the network through one common network outlet. Even better if the outlet will be connected network filter (not Chinese, but standards. Qualities, or UPS) to which a PC and speakers will be connected.

The photo below shows a network filter for 5 sockets. Enough for most ordinary home PCs, you can connect: monitor, system unit, speakers, printer, and also for the phone charger will remain ...

Important! In the absence of grounding, some authors recommend connecting the system block case with a regular battery. I do not recommend that it is categorically (with a certain construction of the network - you can strike you)! In general, the issue with the ground is better to solve with the electrician.

Noise from scrolling mouse wheel

Sometimes noise from scrolling the wheel from the mouse "falls" into audio interference and is heard in the speakers. Sometimes such noise can be strong enough and listen to music when working is simply impossible.

If the sound of the mouse is heard in the speakers, then I recommend to take the following series of measures:

Try replacing the mouse to the new one;

If you use a mouse with PS / 2 connector - replace it with USB (or vice versa);

You can also use PS / 2 adapters per USB. For example, connecting the mouse with PS / 2 by the USB port connector;

Try to use a wireless mouse.

The photo below shows: Mouse with PS / 2 plug, USB mouse, and adapters from PS / 2 to USB.

Mobile phones and gadgets

If your mobile phone is too close to the speakers - then when calling to it (or the arrival of the SMS), you can hear a strong crackling and interference. You can, of course, try to shield the sound cable, but at home, in my opinion, all this is an excessive waste of money, time and strength.

The best way out, find a place for mobile phone Not on a computer table, or at least disseminate the phone and speakers at different angles. Due to this, the crash and noise will decrease significantly.

By the way, this can be observed from racies, radiotelephones and other similar gadgets and consoles. All that has an antenna and radio signals - can be a potentially source of strongest oscillations that reflect in your columns.

In some cases, even the usual printer / scanner / copier, "unusual" table lamp Can cause noise in columns. Therefore, at least at the time of diagnosis, I recommend it alternately disconnect extraneous devices located near the columns, and look behind the condition and cleanness of the sound.

I think there is nothing more commenting ...

High volume on low-quality columns

The volume is above 50% on low-cost low-quality columns (and headphones) may well be the reason for the appearance of noise (It is said that the columns begin to "FONT").

In general, the phoney all columns and headphones. True, better speakers (and, as a rule, more expensive), give a cleaner sound even at high volume, and the foundation is only at the maximum. While cheap - when the volume comes to medium sizes ...

Also pay attention to the microphone. If you have loudly included columns and the microphone works, then the effect of a closed "ring" can be observed.

Low power supply (economical mode)

This advice will be more suitable for users of laptops ...

The fact is that there are several modes of operation in laptops: economical mode, balanced, and high performance. Make this manufacturers in order to more economically spend the charge of the battery.

In some cases, reduced power consumption does not allow to issue qualitative sound. Therefore, I recommend to go to the Windows Control Panel: Control Panel \\ Equipment and Sound \\ Power . Then include high performance and save the settings (see Screenshot below).

Installing an external sound card

For some reason, many people think that an external sound card is some kind of large device, expensive, etc. All this in the past, now there are modern sound cards, the size of which is slightly more than a USB flash drive (and they look almost the same way).

Yes, you will not connect any specific equipment to such a sound card, but ordinary classic headphones and speakers can be connected to it, a microphone, which is more than enough for many users of the "middle hand".

In addition, the external sound card can simply help out and help get rid of extraneous noise when the other options have not allowed to solve the problem. Moreover, the cost of many models is more than available (the cheapest options are not more than a few hundred rubles).

The photo below shows a USB sound card. Such a small "baby" is capable of issuing a rather high-quality sound, which will be placed part of the built-in sound cards. And in principle, most users will suit the most "ordinary" sound.

I have everything on this. Additions on the topic - Welcome ...

When connecting any peripheral device to a personal computer, exhibit special attention and caution. The more difficult peripheral deviceThe higher the procedure will be protected by connecting it. Microphones, headphones and columns are often connected to the speakers. These items today help us communicate on the Internet. Without them, it would be very problematic to imagine a modern user. On the one hand, the connection of headphones and microphone does not require anything special. However, in order to embody this idea into life, it is often necessary to carry out a long-term configuration of the components. In addition, devices can work with errors. Users are quite often interested in the question of how to get rid of noise in headphones when connected to a computer? Why does he ever arise? What is necessary in order to eliminate this problem? If you get answers to all the questions listed above, then work with sound on a personal computer will no longer give you problems.

Why occurs noise when working with headphones?

First of all, it is important to decide where in the headphones there is noise at all. Many users are confronted today with this problem. Sometimes such a problem is temporary, and in some cases noise in headphones may not disappear for a long time. In fact, the nature of the problem is quite diverse. Noise in headphones may occur for various reasons. Pretty problematic to predict exactly which alignment will help to correct the situation. For example, noise in headphones can be associated with shot down settings or hardware failures. Then you need to figure out how to get rid of noise on your computer.

Sound card

The first reason that can affect the sound quality in the operating system, these are problems with the sound card. It may be outdated or damaged. In this case, noise and cracks can appear in the headphones, the sound in the headphones "breaks". Fix this situation Only the full replacement or repair of a sound card will help. Only after that the headphones will disappear noise.

Ground

With this problem, users face quite rarely. It is about grounding the sockets to which the headset and headphones are generally connected. In this case, various kinds of noise may occur. If we are talking about working with a laptop, then the connection of the computer to the grounded outlet is unlikely to correct the problem. Laptop, as a rule, fees on mother card may not ground. In this case, you will have to replace them, or reconcile with this problem. Users in some cases prefer to abandon the use of a laptop.

USB devices

Suddenly there appeared noise in headphones connected to a personal computer? Sounds of various kinds may occur when a variety of devices are connected. They appear immediately, not some time later. For example, you can hear a monoton sound when connecting the mouse. If we are talking about the keyboard, then, most likely, when you press the keys, you will hear clicks. This happens for the following reasons:

- active information transfer to the computer. In this case, it can be recommended not to connect the devices to those or other ports. It is advisable to find other places to connect devices, or start using at all wireless headset And other devices.

- Damage to the USB port. In this case, you can offer to repair the USB port. In practice, users often prefer to simply reconnect the devices to other ports. A similar problem, fortunately, in practice is not found too often. Modern laptops and personal computers are made in such a way that users can comfortably work for machines. It is unlikely that such alignment will meet in practice.

Cable

How else can you get rid of noise in headphones when connected to a computer? Here, much will depend on what model of the headset is used. The problem is that today all devices are divided into wired and wireless. This feature May be of great importance. Noise in columns and headphones is often encountered in models connected by cable. What is the main problem? A variety of noises may occur when the cable is damaged from headphones or microphone. This is due to the poor quality transmission of the sound card. Probably, the cable is simply damaged. In this case, you need to eliminate breakdown. There is another reception that you are advised to perform users with a wired headset: remove the cord from the socket and insert it into the computer again. This method often helps to correct the problem. If you are using for a computer wireless headphonesThat such alignment will not help.

Drivers

The following source of the problem is relevant for all types of devices. But in practice, he is rare enough. A strong noise in the headphones when connecting to a personal computer can be associated with damage or lack of a device driver or audio card. In this case, you need to simply reinstall or update the appropriate software for normal operation. operating system with a connected device. As a rule, with wireless headsets, all drivers are included with the device on a separate disk. In extreme cases, you can always find and download drivers from the manufacturer of the headset or sound card.

Sound at maximum

Often, background noise occurs in the headphones of any model with incorrectly displayed sound settings. It does not matter whether the microphone or not is connected to the computer. It does not depend on it in this formation. If the sound settings on your computer are set to maximum, you can face the appearance of wheezing and noise on your computer. Users usually suffer from such a problem who purchased cheap headphones and headset. You can simply correct this problem. To do this, give up the sound. You can do this using the mixer in the operating system. You just need to click on the image of the gramophone near the clock and the date, and then pull down the slider. As a result, the noise should disappear. How you yourself can make sure in execution this action There is nothing complicated. It is for this reason that it is recommended to acquire headphones with an average cost. When using them, users rarely face a similar problem.
Microphone - harm or benefit?

Now you should be clear how you can remove the noise in the headphones on the computer. But this is still not all techniques that allow you to correct the problem. What if the above events listed earlier did not fit? In this case, the presence of a microphone on a personal computer is important. It is he who often becomes the main reason for the appearance of noise in headphones. How to be? It is certainly not necessary to abandon the use of a microphone. Instead, it is proposed to perform a small volume setting and device sensitivity. In this case, you will be able to get rid of unnecessary noise. How can I do this?

We offer you to use the following instructions:

- download the computer;

- connect the headset with the microphone;

- Press right-click mice on the mixer on the right side of the screen;

- In the menu that appears, click on the "Sound Recording Device ..."

- find the connected microphone in the list;

- click twice in the appropriate line;

- go to the "Levels" tab;

- by moving the slider to adjust the volume and sensitivity of the microphone;

- if there is a PCBEEP, turn off it, shifting to zero volume mark;

- put in the section "Improvements" a check mark opposite item "Reduce Noise";

- You can also note the item "Deleting a constant component".

These actions will help you easily and quickly get rid of noise in the headset.

How to correctly set the settings for the microphone? This issue is solved individually for each user. You can choose the option that best for you is suitable.

Conclusion

It is absolutely no matter which headset is connected to a personal computer, wired or wireless. The bulk of the problems occurs on any models of devices. Most often, wireless headphones for a computer with a microphone are connected and used without much difficulty. The main reason for noise in the headset is the high sensitivity of the microphone. Another possible reason can be a loud atmosphere around the user. How to get rid of noise in headphones? All techniques described above will help to correct the problem. If you use a wireless headset, then with constant noise in headphones, you can recommend changing the USB socket used as a receiver. Otherwise, all the above recommendations will remain the same. Sometimes extraneous noise in headphones may occur due to the activity of viruses. However, after the treatment of the PC, the headset starts working regularly. Fortunately, such problems arise not so often. The basic methods of correction of the problem are to reduce the volume of the sound, setting the microphone and reinstall the driver. Now it should be more or less understandable how to get rid of noise in headphones on a computer.

Almost all home computers and laptops are used to work, participate in a variety of game processes, traveling by social networks And other sites and, of course, do not do without playing audio and video records.

For this reason, users have connected special columns or headphones to most of the devices. These elements help improve the sound and increase its volume. In some cases, both of these components are used.

But when using columns, not only the necessary, but also extraneous sounds may occur. It can be a variety of noises. Quite often, users encounter this kind of difficulties. But since it prevents enjoying watching the film or the sound of your favorite musical composition, then you need to try to figure it out in this matter and eliminate it.

This question cannot be called simple, although at first glance it seems that the users take shape. In fact, the appearance of a cod, trembling, various other noises provoked by the most different causes.

But considering all the reasons meaningless, since this process is incredibly long. So it is worth concentrating at the most frequent scenarios that provoke such a problem.

But before it is worth checking the performance of directly columns, headphones and connectors, in which these items are connected. To do this, use the third-party apparatus. You will need to connect these components to it. To check the connectors, you will need to connect other columns and headphones in them. If this is all right, then it is worth considering other reasonable options.

Check availability of necessary drivers

Foreign sounds can manifest itself in a variety of options. But if they arose, then understand that this problem is not liquidated independently necessary. So proceed to the search for the reasons and the rapid troubleshooting.

Because of the problems with the drivers can be anything. Very often, users may notice the incorrect functioning of the gadget, since it does not take out several drivers or they are outdated. The reason is a banal, but in this case, due to these components, the device can stop.

If special drivers are not installed, the sound may not be played at all. Incorrectness in the work is also noted in cases where the drivers were installed at all. It is extremely important that only those elements that are suitable for all 100% are loaded on the device.

Otherwise, a variety of programs will begin. A sound card will eventually not provide sound playback in the right mode. In general, the work of numerous elements is violated, which in the complex ensure the reliable functioning of the device.

Therefore, in the end, and therefore various noises appear. Problems of this nature may be satellites process for reinstalling the operating system. That is, when the user has executed windows download Or updated the system, then the difficulties arise with the drivers.

This user can learn from the relevant notification that will be shown on the PC screen. To check whether the work is performed correctly or not, you will need to go to the task dispatcher. To do this, activate this assistant.

You can make it using multiple keys or when you go to the control panel, which is located in the main menu on the desktop. Next, go to the hardware and sound section. And after that, several sections will appear, among which you can find the task manager.

After that, you will need to open a tab called "Audio inputs and audio outputs". Now you need to carefully look at whether the exclamation marks of yellow or red are specified opposite the devices. If such is not visible, the problem is not related to the drivers.

But if they are suddenly present, the problem arose with these elements. In this case, it will be necessary to check for all the necessary components. If necessary, it remains only to download the missing objects. After that, there should be no difficulty with sound. But this is if the perpetrators were drivers.

Difficulties with cable. Frequent cause of noise

There are often cases when users have to face with a non-working properly cable. This is one of the most common reasons. As a result, extraneous sounds, noises, crackles and so on may appear.

There is a problem in bad contact between the column and the sound card. Contact contact for a variety of reasons. Most often, this is due to the fact that the cable may be loose. At the same time, it can move to different positions, damaging.

So the best way out is the attachment of the cable to the wall or object of furniture. In this case, it will be constantly in the same position and do not be damaged from people and animals.

Also, there are also cases of occurrence of damage to not the entire cable, but its individual parts. It may not disappear sound not in two columns, but in one. To certify in this kind of damage, install headphones to another device. During testing, it will be possible to identify the true cause. So, it will be possible to eliminate its consequences.

A bad contact can be revealed between the device's network card socket and headphones connected to it. Sometimes there may be some manipulation with a plug out of the situation. You can try to remove it, and then insert again.

You can also try it a little and very carefully turn. In any direction we turn and check, the connection was ensured or not. In some cases, these simple actions are able to help.

In any case, it is necessary to ensure that the cable is placed. It should always be attached to the floor or wall. In this position, it will be less damaged during use. Also, the cable should not move each time, rotate and perform other manipulations that can be harvested by its signals.

Also, often difficulties arise for other reasons. If this item is too long, then you should not surprise outside sounds. This is due to the fact that the cable is often bent. In this position, it transmits a signal with damage. So it should be made of its optimal size and the problem will be eliminated.

Adjusting sound parameters

Often, difficulties arise precisely for this reason. It is difficult to even imagine what proper setting Playback parameters can improve sound quality. But if the user illiterately completed the setting, then noise and other sounds can appear.

At the same time, the user may not even guess that he previously performed some actions incorrectly. Quite often all sorts of interference in sound can be observed due to the included PC Beer and linear entrance. Often incorrect setting Provokes changes in frequency parameters.

This is later displayed on sound quality. In this aspect, it is necessary to consider the features of the apparatus used, since for each device, the settings are made individually. Adjusting audio data is performed in the control panel.

Users will need to go to the Sound and Equipment section. After opening a tab with the volume settings. Now it will seem the icon with the image of the speaker, along which you will need to click. In this case, the device properties will open, which are displayed as "speakers and headphones".

Users should slightly reduce the signal level, as well as produce some other adjustments regarding the PC Beer section. You must view the data that is listed in the CD parameters, as well as in the Line Input tab.

Once the work is completed, then it is mandatory to preserve the information made. In some cases, after this kind of manipulation, the reproducible sound becomes much "cleaner" and more beautiful. So do not neglect the setting.

Bad quality equipment

Some users prefer to buy inexpensive goods, but at the same time demand from them high Quality. But it is extremely rare. Often, users notice a decrease in the quality of the sound playable.

But the thing is that when creating inexpensive columns and headphones it is impossible to use expensive parts. Therefore, it is not necessary to demand something supernatural from such components. Inexpensive models will not be able to provide excellent sound. It is not particularly worth doing the volume level to the maximum, since in this case there will be especially interference.

You should always adjust the volume level not only directly on the speakers, but also on the computer used. Only in case of achieving harmony you can achieve sound good quality. In general, it should not be saved if the goal is excellent sound.

Causes of other nature: Grounding and power supply

This problem may appear if the columns are passed through themselves electrical signals. They also pass through the case of a personal computer. That is why it is not to be surprised that there are various third-party noises, which, in theory, should not be.

To exclude this problem, it will be necessary to apply incredibly simple in the implementation of the reception. It consists in ensuring the connection of the device with the battery. All this is performed using a conventional cable or cord. Eliminate interference is possible in this way if the reason was directly related to the ground.

But also difficulties may occur due to power supply. Since such a problem concerns only laptops, it does not threaten the users of stationary devices. So laptop users can try to check the sound card for food. If it is not enough, it provokes the appearance of third-party noise.

You can check this in the power supply tab. You can detect it in the main menu. Click on the "Start" button, after which there will be many sections, among which the control panel will also appear. Next, we find a section with a system and security.

Now it remains only to enter a power supply tab. It needs to specify the level of productivity that is needed. Select the maximum value. In the S. tab additional parameters You should specify the desired value. Often, this section is hidden. So it does not need to be frightened.

Immediately after the manipulations produced, we try to connect the gadget to the power supply network. Only after that you can try again check the sound quality. If everything is in order, the problem concerned exactly the lack of food.

There is also another kind of noise that may be infrequent. It manifests itself in the fact that when scrolling the mouse, this sound can be clearly heard in headphones or in columns if they are connected. Maybe some this is not very annoying, but a separate group of users is very tightened from it.

Therefore, it is necessary to consider this error option. Causes can also wear a variety of character. Therefore, it is extremely difficult to establish a real "culprit". So it is worth trying to perform several manipulations that will really help.

You can also be resorted to the implementation of the mouse connection with another port or use a completely different mouse. You can also purchase a wireless wireless version. This can help in some situations. So the problems with the mouse can also provoke the occurrence of atypical noise.

Whatever the reason, it can be revealed, and then attach all the necessary efforts to eliminate its consequences. This instruction will certainly help.

Despite the ease of operation, sometimes we still face definite problems, such as extraneous sounds, similar to hissing and wheezing, because of which the sound quality is generally deteriorating significantly. To eliminate this problem, you need to know possible reasons Her appearance.

It is important to know that despite all the elementality this device, a person who did not have to faced with problems in his work and eliminate them, this problem may seem very serious.

In order to understand where the hiss in the headphones arises, you need to understand a little about how they are arranged. Pay attention to the fact that you constantly hear hissing sounds or only periodically.

One of the reasons why this problem may occur is incorrectly connecting headphones, or rather, the choice of incorrect settings. In addition, if the headphones are not new, check if the contacts are working with which you connect them.

Recommendations: How to warm up the headphones and whether to do it
How to independently fix the headphones if one stopped working
, Repairing headphones do it yourself

Noise in headphones caused by faulty sound card

Such a part, as a sound card, has the most direct impact on how high-quality melody is reproduced by equipment. If the item is faulty, personal Computer It cannot accurately transmit sound signals, because of which the normal sound is complemented by hissing, a crash, the sound seems to be overwhelmed and "jumps". In this situation, only replacing the faulty item will help, and then the sound will no longer be accompanied by outsiders.

Faulty wires

For the correct operation of the headphones and the correct transmission of sounds often corresponds to the manufacturer of the model.

It should be known that there are two types of headphones: wireless and with wire. Outsided sounds, as a rule, appear in models running through a cable connected by a plug. If the copper cable live is damaged or stretched, noise noise and jump-shaped sound interruptions.

The damaged wire often leads to noise in headphones on the iPhone. This is due to the fact that the cable material is thin and flexible, it is easy to break. The conductor with damage sends the sound card to incorrect characteristics of the signals, and this is reflected on the sound. How to eliminate the hoarse of headphones? This can be done, removing the overshadled or bare area of \u200b\u200bthe wire, as a last resort, will have to buy new fittings.

Broken usb input

Incorrect sound may occur after connecting other gadgets to a USB connector. Call the problem can mouse, or defective keyboard. In this case, by pressing the key, you will hear clicks. There are quite objective reasons why it happens.

When the information is transmitted, the load on the PC is raised. To reduce it, you need to do the following:

1. Switch the plug to another port.

2. You can also purchase a splitter and repair old connectors for connecting.

3. Start using wireless devices.

The problem is that very often users do not pay due attention to the computer, they do not immediately repair the emerging problems. As a result, USB connectors one after another come to unsuitability, and only one remains, in which the splitter connects and it is all the load that it becomes the reason for its increase.

How to wear intracanal in-ear headphones

Noise from working with mouse

When you make a scrolling page with the mouse, sometimes you can also notice noise, sometimes they are simply unbearable. Solution of the problem will be the replacement of the mouse, switching the mouse to the neighboring USB port or setting an external sound card.

No grounding sockets

This problem is not often, but still arises, interfering with the normal operation of headphones. The absence of grounding can also cause a cod, clicks and other noise in headphones. If you have already checked the headphones and did not find any problems, check the sockets to which the computer is connected.

This nuance concerns only stationary computers, laptop fees are usually ground at the stage of their production.

When you use headphones connected to a laptop, incorrect sounds are most likely provoked by internal malfunctions of the device. Should not tighten with the appeal to service centerwhere your device is propagated for troubleshooting.

Sound source itself does not work correctly

Violation of the rules for using headphones often leads to a violation of their work, and in particular to the sound. Also, problems occur in the work of the main sound source. Rarely, but still occur the driver errors. Program errors and failures in the operation of the operating system cause interference in the form of noise and cod.

The problem can be detected by checking the device using the connection of various headsets. If their work is equally unacceptable - unpleasant sounds will be heard in all headphones, it means that the problem is hiding in the device driver.

If you are used to listening to very high volume music, you can also notice the appearance of hissing and cod. As a rule, it happens if you purchase inexpensive headphones.

Not enough powerful power supply - another reason foreign noise With the sound of headphones (such a problem is sometimes found at the owners of laptops, which have not yet understood with all its features). Eliminate this problem simply using the following prompts.

On your laptop, go to the "Control Panel", then in "System and Security" and, finally, in "Power Supply", and select " High performance" At the end of the setup, check the sound quality in headphones.