How to get windows 10 activation. What happens if you don’t activate? Let's look at them in more detail
If you receive unpleasant messages from a new operating system stating that it was not possible to activate it, then there are a number of typical reasons for this:
1 Pirate version
You intentionally installed pirated version, so as not to pay money to the owners of the software product. Microsoft simply does not validate the key through its servers. In this case, it is quite simple to do. Should be opened command line cmd in Windows 10 and write the following lines there. Naturally, this needs to be done by an administrator.
slmgr /ipk W269N-WFGWX-YVC9B-4J6C9-T83GX
slmgr /skms kms.xspace.in
After these commands, the operating system is activated without problems. If this does not help, then the Internet is full of activators.
2 Free update
You took advantage free update and switched from operating systems 7 and 8 series. In this case, you need to open the Settings tab in the Start menu, click on Update and Security, and then select Activation. It happens that Windows writes about the impossibility of connecting to the Internet. If the connection is established, activation should occur automatically. Sometimes all Microsoft servers are simply busy, so you should wait patiently for a while and try again.
3 Unpaid license
You should check the Go to Store tab to see if there is even an available license for your computer. This tab appears along with the Windows system is not activated notification. In the event that a license is not available, you simply need to purchase it. It happens that the previous series of the operating system was not activated, in which case you need to return to the previous Windows, activate it, and after that install Windows.
4 Clean installation from media
Windows 10 can be installed from media. This is a typical situation ISO image, uploaded to the card USB memory. Everything here is interesting, since Microsoft simply does not know about the fact of the transition from previous versions of operating systems to the new tenth. As you know, if you had Windows 7 or 8, from which the transition was made, then the right to the licensed version of the 10 series automatically remains with the user. But when clean install with USB there is no such right, since the fact of having a license of previous versions has not been established.
Version 10 of the software will prompt you to enter a key or simply buy a new license for software. In this case it is better to return to previous version operating system and activate it. Next you need to upgrade to Windows 10. When installing from USB media You should not click Install Now, as a clean version will be installed again.
5 Wrong version of the previous operating system
If error 0xC004F061 appears when activating Windows 10, it is possible that the required Windows series was not pre-installed on the computer. We remind you that version 10 of the software always requires either the 7 or 8 series of the operating system to update. If formatted HDD, then the update key also cannot be used. You will need to roll back to versions 7 or 8 again.
6 the computer was sent in for repair and a different OS was installed on it
There are organizations that independently install and assemble components. Operating systems are no exception to their work. Within repair work They can easily install another version of Windows, which in its parameters will not be suitable for updating to the 10 series. During repairs, they may also use another product key that blocks software, if it is used on several machines.
It happens that operating system activated prior to assembly or repair work. Here you should enter the software key that was supplied with the components. If these steps do not solve the problem, then you can try reinstalling the initial series of Windows.
7 Operating system on multiple computers
In this case, the system displays error 0xC004C008. Here the activation procedure cannot work since Windows 10 is already registered somewhere. The license agreement sometimes does not imply the ability to install on multiple machines at the same time. So you will have to purchase new licenses to use the operating system or remove the software on those machines that are not used.
8 Using a used computer
We do not always have the desire to purchase new things at inflated prices. It also happens that you buy a used computer with software, but there is no key for it. You need to contact the person who sold this computer and ask him license key operating system. Often used computers use unlicensed Windows, so you may have to buy a new license.
9 Change of hardware
If you change any component on your computer, Windows will simply not be activated. The thing is that the software is tied directly to the hardware. Yes, manufacturers have to resort to such tricks to fight piracy. This rule applies hard drives And motherboards. In this situation, you need to go through the procedures recommended by the software developers.
We hope the information on how to activate Windows 10 will help you.
(Visited 10,402 times, 1 visits today)
Hello friends, today’s article I want to focus on how to activate Windows 10. Not only will I describe in this article all known legal and effective ways activation, but I will also write about illegal ones, which are very a large number of users are now using it. This is true, because no one wants to pay about 8 thousand rubles for one copy of Windows 10 Pro.
In this material I will discuss ways to activate Windows by phone, using a key, and also without a key. Let's learn about programs that can activate the system, as well as other software, in a couple of clicks. Let's try to understand why Windows won't activate and much more. If the article is very long, I will divide it into two parts.
Activating Windows using a key
The easiest way to activate Windows 10 is to enter your product key. In the boxed version, this key is painted on the box itself. On most laptops it is glued to the back of the laptop. The next point is that the key is usually tied to the hardware, so it is unlikely to work on other devices, but in laptops it is embedded in the BIOS. This means that you do not need to enter the key, you just need to install the system of the desired edition and it will activate itself.
If you have a Windows 10 key, you can enter it as follows:
Open the window with system parameters by pressing the Win+I keys. Next, go to the “Update and Security” section. Go to the “Activation” subsection and find the parameter on the right "Change product key".
In the same window, you can find out the edition of your system, for example, Windows 10 Home, and whether the system is activated or not.
Additional information about update 1607
Since about 2016, users who upgraded to Windows 7 and 8 from Windows 7 and 8 have the key linked not only to the hardware, but also to account Microsoft.
Many already know that this resolves problematic situations with activation when replacing components and other nuances.
Windows 10 Digital License
There is a so-called digital license that does not require entering a product key. When connected to the Internet, the system is activated automatically. This function is available only to those users who upgraded from a licensed version or are members of the Windows Insider program. Once this is done, the user will no longer use the key, because it is already tied to the hardware, this is called a digital license.
In the Update and Security window, you can see how Windows was activated.
Many websites and forums write that you should not enter a key during digital activation. This means that the activation may fail, and the key you enter may not work. Although this does not always happen.
I also suggest that you read the article from Microsoft, which describes activation solutions.
Activating Windows 10 by phone
If you cannot activate via the Internet, or some activation methods do not work, you can use the following method.
- Press the Win+R keys until the Run window appears.
- Enter the command slui 4.
- A country selection window should appear.
- The number you should call will be displayed, there will be instructions for activation, just in case you can write everything down.
- When you receive the code, enter it in the required field and activate it.
By the way, some editions do not allow you to activate Windows by phone. In this case, a corresponding message will appear.
How to activate Windows 10 after changing hardware
This question is very important. If you are linked to a Microsoft account, then there will be no problems. That's all the pies. Before changing the configuration, bind the key to your account to avoid problems.
Where to get a license key to activate Windows 10
The legal way is to buy a key. There are several ways to purchase it:
- Purchase via windows store PRO version.
- Purchasing the boxed version.
- Purchasing a laptop or computer on which the key is already linked to the equipment. (The most expensive way).
From the store you can easily upgrade to the Pro edition, but if you have any version other than “For one language”. I have already encountered this myself and cannot update the top ten due to the OEM cost.
Buying a Windows 10 Product Key on eBay
Recently discovered interesting way system activation. Need to install the required version system, buy a key for about 200-300 rubles, enter and activate the system. Some say it's illegal, but others use this option and don't complain. I myself don’t know how to feel about this, but I’ll tell you about the method.
Register on eBay auction and enter “Windows 10 Pro” into the search bar. We are presented with a large selection of goods, the prices of which vary greatly. But you need to buy from the seller with the highest rating and many positive reviews.
You buy the key in a way convenient for you and wait for it to arrive in the mail. Once received, enter it and enjoy your licensed copy.
How to activate Windows 10 without a key
Now let's start looking at options where we don't need a product key. Here we become a pirate, something we shouldn’t become, but you can’t change people.
Activating Windows 10 using KMS
The most popular method of activating Windows is using a special KMS activator. You can download and activate it clean Windows, or download some assembly where the activator will already be built in and will do everything itself.
The activator usually has several ways to activate the system and the ability to make even an office “licensed”.
There are other software that activate Windows. For example, Re-Loader Activator. Before use, it is advisable to disable the antivirus and click on the “Active” button. The utility will do everything on its own.
Well, I think I’ve sorted out all the methods and at least one should work. Of course, it is better to use legal methods so that there are no problems later. Did anyone have them? Don't think.
A couple of interesting materials:
After Windows installations 10 do not put off for too long the decision of such an important question: “How to properly activate new Windows 10?". Otherwise, the user will receive at least working system, but limited in several parameters. A system notification will constantly appear before the eyes of the computer owner that it is activated.
And the user will not be able to change the “Personalization” parameters at his discretion, but otherwise the new operating system with index 10, oddly enough, will be quite functional. This article describes all solutions to issues related to emerging difficulties, such as the problem with subsequent activation of installed Windows 10, and also details methods on how to activate Windows 10 for free.
Problems
In practice, most often users encountered the following problems due to which computers with installed Windows 10 system activation:
1. Windows 10 cannot be activated due to a discrepancy between the OS previously running on the PC
This reason is indicated by the display of error “0xC004F061”. Often, a PC was previously running an early OS modification that did not meet the requirements. Windows 10 is automatically activated after updating only official versions Windows 7 or 8. And if users of licensed “Sevens” and “Eights” were unable to successfully complete the procedure, then the partitions were probably formatted hard drive computer without a preliminary upgrade process to “Ten” in order to have time to link the equipment to the new system. Such PC owners are recommended to, if possible, roll back to the initial modification of Windows.
2 Unofficial modification
If the user has installed an unlicensed copy of Windows 10 on his computer, Microsoft will not confirm the key entry. In this case, the owner of such a pirated copy must enter the command line, where he must type as a system administrator:
slmgr /ipk W269N-WFGWX-YVC9B-4J6C9-T83GX
slmgr /skms kms.xspace.in
Next, by executing the specified commands, “Ten” is activated, and the user can normally operate the OS. But in the case when such activation fails, it is recommended to use an activator. This material below will provide descriptions of guidelines for the use of currently operating activators.
3. Changing PC components
After updating to new system A Windows license is reserved for specific equipment of the user's electronic computer. If you replace some computer components, Windows 10 will not activate.
Activation methods:
1. Using a key
This is the easiest method. If you have purchased Windows 10
or when purchasing, for example, a PC with Ten already preinstalled,
then the user has an external system drive with a key or it is registered on the computer case.
To activate, the lucky owner of the key only needs to do the following few sequential steps:
2. Using an activator
Many users will be pleased that by now a huge number of different activators have already been released, with the use of which you can quickly complete the task. The computer owner only needs to decide whether he should use them, since a significant number of such special applications contain viral content and utilities.
But there are also programs that have been tested many times and lack malicious applications, however, they are often filled with various so-called “garbage”, which are completely unnecessary utilities. For example, a similar activator is shown in the image below:
Due to the above problems that arise when using activators, it is recommended to use only the utilities presented in this manual that have already been analyzed for cleanliness.
Activator – “Re-Loader Activator”
It is easy to use. In addition to the main task, it also copes well with activating Microsoft Office. In order to ensure the functioning of the application, it is necessary to install “ Net Framework 4.5".
The algorithm of actions consists of the following steps:
"KMSAuto Lite"
This utility is deservedly very popular among new users of Windows 10. Similarly, like the previous one, it very simply and successfully copes with the problem of activating the OS and Office.
You need to do the following:
For users who upgraded their system to Windows 10 for free
If the computer owner has made the transition from Windows 7 or 8, then the following sequential steps must be taken:
- Click “Start” and enter the “Settings” section;
- Then click “Update and Security”;
- Next, go to the “Activation” tab and if the computer is connected to the World Wide Web, then after this the procedure will be performed automatically.
Note: It often happens that Microsoft servers cannot cope with the influx, so the only thing recommended is to be patient and, after a period of time, perform all the above steps again.
Using Skype
This method requires a significant amount of time from the user, but turns the tenth OS of the computer owner into the official one forever.
The following actions are required:
Windows 10- not a free operating system. For residents of the CIS purchase licensed copy hits your pocket, and trial versions The OS is quite limited in functionality. Therefore, the user sometimes has to resort to piracy. After all, software hacked through activation Windows family will be no different from the product sold in the official Microsoft store.
Even with a well-protected 10th copes KMS Auto Lite. Tested by more than one generation of Windows, the program has become a favorite among its peers and is capable of activating any Windows version 10 and fully functional. No additional knowledge is required to use it. If anything, you can always rely on the instructions, which describe all the nuances of the activator’s operation. Server OS and Office are also supported by the program. Let's get down to business.
So, you have the original Windows 10 installed, which needs to be activated. In this case, the bit depth is not important. The method works with both 32 and 64-bit versions. First make sure your image is not activated. The status can be found in the window Properties computer.
Detailed step-by-step instruction by use KMSAuto Lite Portable. This version is portable and does not require installation.
How to activate Windows 10? Elementary!
1. The first thing you need to do is download and unpack the archive to any convenient place (for example, your Desktop).
If the system does not have a built-in archiver, then you can use .
Click right click mice ( RMB) by archive, select Extractto(extract to). After a short dearchive process, a folder will appear on the desktop that you will need to go into.
2. Find the file in the folder KMSAuto.exe. Click on it RMB and run as administrator. The program will receive necessary rights to bypass system protection. A small window will open with three buttons. We will use one of them.
All you have to do is wait for the process to complete. It can take some time.
4. Inscription Activation Successful will indicate the completion of work and successful activation of the OS. To consolidate the result, restart your computer.
Attention. If the procedure does not reach the end, stuck on the recording Activating…, restart your PC and start from step 2.
Congratulations. Your copy is activated, now you can use all the features without purchasing a license.
Download Windows 10 Activator:
This auto activation via kms auto is suitable for everything Windows versions and Office!
Windows 10 is a new operating system of the Windows family (and the latest edition, as Microsoft itself states) Many have managed to install it, and many are still thinking about it, because they are afraid of problems with further Windows 10 activation. In this article, I will tell all ways to activate Windows 10. Via Skype, using a key, using an activator
I won't talk about licensed software. Everyone decides for themselves whether to buy a licensed Windows 10 or activate it using other methods.
The first activation method is the easiest. If you purchased an operating room Windows system 10 (or laptop with Windows 10 installed). Then you have either a disk with Windows 10 (on which the Windows 10 key is written) or you can look at your Windows 10 key on the lid of the laptop.
The most important thing to activate Windows 10 is to install the version of the purchased Windows 10. If you have Windows 10 Home, you need to install the Windows 10 home version, and not Windows 10 Pro. The Windows 10 key is suitable for both 32-bit Windows 10 and 64-bit versions.
Some desktop computers that are sold with licensed Windows installed also have a sticker with the Windows 10 key. 
When you know your Windows 10 key, then you can start activating Windows 10. Right-click on This Computer — Properties and press Windows activation
Now enter your key and click Activate. If everything went well, your Windows 10 is activated 
Activating Windows 10 using an activator
There are already many different activators for Windows 10 that will also make your system activated. Decide for yourself whether to use them or not.
Option #1. Re-Loader Activator
Re-Loader activator is an excellent and simple activator that will easily activate your operating system and make your Windows 10 activated
The Re-Loader activator can also activate installed Office 2007, 2010, 2013, 2016
Attention: For the activator to work you need to install .Net Framework 4.5
It is advisable to turn off the antivirus before using the activator. Launch Re-Loader 
Select what you want to activate and click Active. 1 - Windows activation. 2-Office activation
Option #2. KMS Auto Lite
Kms Autolite is a popular activator from Ratiborus. The activator can activate both Windows 10 and Office 2016.
Now run the KmsAuto Lite activator 
Select the products you want to activate and click activation 
Activating Windows 10 via Skype
Only “selected” fans of Windows 10 know this method. Windows 10 can be activated by phone using Skype and a key found on the network. This method is quite time-consuming, but it makes your Windows 10 licensed, and forever.
First, you need to find a key that is not yet blocked and suitable for activating Windows 10. You need to check the key using the MsAct v 1.06 program
Download MsAct v 1.06 to check Windows 10 keys
Launch the program MsAct v 1.06 - Insert the key into the field— Install the key
If the key is suitable for activation in Skype, the program will display the following message: 
Now let's call the number +3728002230
in Skype Microsoft. To activate Russian, press 2. Next, enter the Windows 10 key when asked.
Then the girl will dictate 8 blocks of letters and numbers. You must write them down on paper or in a notepad and then enter them in the MsAct v 1.06 program and click Apply code
Activating Windows 10 via Skype via Msact
After that, save the activation somewhere by clicking on the floppy disk
Conclusion
I described all the ways to activate Windows 10. The most correct way would be to purchase and install a licensed one purchased in a store. Decide for yourself how you want to activate Windows 10. Here are the SELECTED
methods that do not contain viruses and will definitely activate your Windows 10
P.S: Look for activators on the Internet
