home › Working with video › What to do is the phone fell into the water. Why the screen does not turn on, the sensor on the phone that fell into the water? Isopropyl and ethyl alcohol

What to do is the phone fell into the water. Why the screen does not turn on, the sensor on the phone that fell into the water? Isopropyl and ethyl alcohol

The phone, the remote control fell into the water, or just got very wet due to other circumstances - the situation is quite common.

What to do in this case? Recently I had to read tips on what to do if the phone fell into the water. It was advised to just shake it off well and dry it in a warm place in the sun on a radiator, etc.

The advice is generally correct - But ... I considered that these tips should be supplemented with extremely important remarks.

First thing to do

It is necessary to remove the batteries from the remote or the battery in the case of a phone. If it is of course extractable. It will not be superfluous to also remove SIM cards and memory cards from the phone. Why is it important?

The fact is that when moisture gets in between the conductors of various metals, of which there are many in electronic devices, electrolysis occurs, and with a connected power source, this process is accelerated many times.

Therefore, the tracks of the conductors on the device board, small elements will simply dissolve, leaving behind something similar to dust. So do not let your phone "dissolve" as soon as possible, remove the battery from it.

And now, when the power source is turned off, shake it off and dry it.

Second, do not rush when drying

If your phone got wet very much, or even completely went into the water, then all the moisture from it will evaporate for quite some time. You will have to dry for at least a day, and preferably longer. It would be right to disassemble the device as much as possible, ideally to get the board, if you can’t, then at least remove the case and battery cover when drying, and of course we don’t install the battery itself until completely dry.

If you knew how to get the board, feel free to dry it under an incandescent lamp or in the sun, LED bulbs here they will not help they do not heat up. But if you dry the whole phone, then avoid excessive temperatures: direct sun, very hot radiators, etc. otherwise the glass on the phone may fall off. Or worse, the body is deformed.

The summer sun can heat the plastic case of devices so much, especially if the plastic is black, that some types of plastic begin to warp and deform from heat. Here the rule is better longer than hot. It can also be a good method to completely submerge the device in dry rice and stir it from time to time, the rice will absorb moisture.

And finally, if your phone is expensive and you don’t want to part with it forever, I recommend that after drying, even if the device is working properly, take it to those who repair phones. This is important in order for your drowned person to be looked at by a specialist and, if necessary, cleaned in an ultrasonic bath.

Because even the measures taken in time, in case of serious flooding, do not guarantee that the oxidation process has not begun, and moisture has not remained under the microcircuits. In addition, even evaporated moisture leaves behind salts, well, unless you drown your phone in distilled water, which is unlikely. And if this oxidation process has begun, then performance is a matter of time.

Only complete disassembly and cleaning in an ultrasonic bath can save your gadget for sure.

With remotes remote control easier, it can be disassembled independently and dried as needed. I plan to write some notes in the future, so read on if you are interested.

A lot can be done through carelessness. Particularly at risk mobile devices with which people now practically do not part. They are often dropped. And it's good if the phone fell on a soft surface. Even if you fall on the asphalt, there is a chance that nothing bad will happen. But if the device fell into a puddle, or didn’t even fall, but got wet in some other way, this is already unpleasant. In such a situation, you need to act quickly, without hesitation. Therefore, it is necessary to know the sequence of actions. What to do if water gets into the phone?

What should not be done?

There are a few odd methods, such as sticking the device in a bag of rice, which will draw out all the moisture. They also advise to completely fill the phone with alcohol. What to do if water gets into the phone? Definitely don't follow this advice. All this is ineffective, and further it will become clear why.

The most dangerous liquids for phones are sea water, water with washing powder or jam. Yes, they drop into it too. And liquids that contain alkali, salts, and so on are also dangerous.

Even if the water that got into the phone is distilled, impermeable electricity, then the garbage that is sure to be inside each device can lead to unpleasant consequences. What to do if water gets into the phone? You need to take immediate action right away. After all, even if you dry the device without disassembling it, then over time all the tracks on the board will still oxidize and collapse. A month later, irreparable problems may already begin. A recessed telephone will still work, but it will not be able to live like this for a long time.

So, what is the sequence of actions needed? What to do if water gets into the phone? And you need to do the following:

Take off back cover and remove the battery.
Shake off all visible drops.
Find a dry rag or towel.
Remove the housing and remove all liquid inside the device.
The board must be washed with alcohol.
Do the same with all other metal parts (this can be done with a brush or in an ultrasonic bath).
Dry the device for at least 12 hours.

Detailed description of actions

With the removal of the battery, you can not hesitate for a second! What to do if water gets into the phone? You need to get it out of the water if it fell there, since even a couple of seconds is enough for a significant amount of moisture to get into the holes for the headphones and memory card. Even worse if it is water with washing powder. So housewives should put their phones away during laundry. The battery must be removed as soon as possible, as a short circuit may occur. In the process of disassembling the device, the SIM card and the drive are removed. All this should be put on a dry towel.

Phone disassembly

Many users will of course carry the recessed device into service center but not all masters do quality repair technology. Especially if it's a wet phone. Some do only part of the repair, after which the device can work no more than a month. Therefore, it is better to understand this issue and do everything with your own hands. After all, the user himself will treat his gadget much more carefully than a master who does not care about other people's property. And with their "help" you can easily and irrevocably lose all valuable information.

First, on the Youtube website, you need to find instructions for disassembling just such a phone model as the user has. The video will show everything from the type of latches to the number of loops. Sensory devices have fewer nodes.

What tools will be needed?

Set with small screwdrivers, asterisks or hexagons. It depends on the specific model.
A sharp scalpel, pick, or some kind of thin plate that can be used to pry off the body parts of the device.

Everything must be done slowly, very slowly and carefully. It is necessary to carefully disconnect all cables, speakers and the like.

Cleaning from the inside

This process is probably the most painstaking. It is better not to use cotton wool here, because there is too much pile left from it. It is better to choose cotton fabric or napkins.

Solvent must never be used! In order to wash the device board, you can take ordinary ethyl alcohol from the first aid kit. After all, it is available.

It is necessary to put aside the speakers, microphone and display for now. Then they can only wipe the contacts. It is not necessary to wipe the outside of the case with alcohol, as this can leave streaks and stains that will ruin appearance devices. The board itself can be dipped in alcohol. It removes all impurities and oxidation. If you do not do this immediately and efficiently, then after a while it will be too late, and you will need to solder it. If there is, then the board after brushing can be dipped into it.

Drying from alcohol

After bathing, the board is wiped dry from alcohol. This must be done with the utmost care. After the liquid has evaporated, the dissolved substances should not settle on the parts. Alcohol dries very quickly, but moisture can remain under the microchips.

After all the above operations, you can collect the phone and try to start it. Everything should work. This should save you nerves and money.

If, nevertheless, the phone does not work, then you can’t do without visiting the service center. The main thing is to choose a good master. Recommendations from other people should help with this.

Water in sensor

Sometimes it happens that water gets into the phone screen. What to do? In most cases, it must be replaced with a new one, since even small droplets are undesirable. The cost of the screen is not very high, and you can find it in specialized stores. You can also ask for repairs there.

If you decide to replace yourself, then you need to do the following:

Disassemble the device.
Separate the sensor itself from the screen. If there is a sticky layer, then it can be wiped off with a cotton swab soaked in nail polish remover.
Install a store-bought sensor.

Attention, before you buy it, you need to make sure that the problem is not in the connector or cable, as often the contacts simply deteriorate due to corrosion.

It also happens that water got into the speaker of the phone. What to do in this case? There is no choice here: it only needs to be changed to a new one. The speaker is no longer subject to restoration. What if water got into the camera of the phone? What to do then? It’s fifty-fifty here: either when parsing and drying, the moisture in it will completely dry out, or especially sensitive elements will refuse to work and you will have to carry the device to a service center, where, most likely, they will say that the camera needs to be replaced.

These actions will help if the mobile phone got into the water. What to do if this happened? Most importantly, don't panic. If everything is done correctly, then in a day there will be no consequences. But it is best to be careful and ensure that the mobile phone is not near sources of moisture.

Probably, each of us at least once dropped a mobile phone into water or simply wetted it. For example, he sent the phone along with the clothes to the washing machine, forgetting to pull it out of the clothes, or spilled some liquid on the phone (coffee, tea, juice), dropped it into a puddle, into the sink, on vacation into the lake or into the river. Yes, even in winter, there are often cases when the phone falls into a snowdrift or just in the snow, but in order for the phone to stop working, one drop of water is enough for it. And the point here is not as in the water itself, but as in the fact that water or moisture serve as an excellent electrical conductor, provoking a short circuit of parts in the phone. As a result, the internal parts of the phone simply burn out.

But, a short circuit of parts can only occur in one case, this is if the phone is turned on after it gets wet. Otherwise, nothing will happen to him.

Therefore, in order to prevent the phone from burning out and return the phone to its previous working state, you need to follow a few simple steps. Namely, the first thing is to immediately turn off the phone after it gets wet, or, if it was already turned off, then do not try to turn it on.

The second step is that you need to prepare the phone for drying so that the phone is completely dry. To do this, you need to remove everything that can be removed from the phone, disassemble it, but in such a way that you can then reassemble it yourself. The first thing we do is remove the back cover, take out the battery (battery), if the battery is not removable, then naturally leave the battery in place (the main thing is to be de-energized - turned off). We take out a SIM card, a memory card, remove all plugs (the more holes appear, the better - for more air access).

Then, we leave the phone already disassembled to dry, just at room temperature (but not in the sun, on the window, not on a hot battery or on any other heaters) for 2-3 days.

There are also good auxiliary and effective methods for drying the phone, which can be used as mandatory manipulations to save the device.

what to do if the phone fell into the water

1 - put the phone in rice, and leave it in rice for a couple of days. Rice groats perfectly absorb moisture, and can remove all excess moisture from the inside of the phone.

what to do if the phone fell into the water

2 - when the phone is already disassembled, it can be dried with a vacuum cleaner with a narrow tip nozzle, carefully vacuuming the inside of the phone for 5-10 minutes.

3 - You can also use a hair dryer. Just that the air flow of the hair dryer should not be hot, only cold, and dry the phone with a hair dryer. A conventional fan is also suitable, aimed at a disassembled or open phone for 20-30 minutes. But, then don’t rush to turn on your phone, but let it lie down for a couple of days, for reliability. After a hair dryer or a fan, the phone can be assembled by placing it in rice for a couple of days to lie in rice.

If your phone did not immediately burn out after it got wet, and there was no short circuit in it, then after drying the phone will definitely work again, like new.

Personally, my phone fell into the water. I just immediately removed the back cover, took out the battery, and left the phone open for a week in the room, during which it dried completely. Then I turned it on, and it worked as if nothing had happened. The phone has been working for me so far for 6 years after I took a bath.

what to do if the phone fell into the water

The phone fell into the water: actions

Get your phone out of the water as soon as possible. The longer he spends in the water, the less likely he is to recover and vice versa, the sooner you get him, the less damage he will receive. So, if you dropped your phone in a puddle for a fraction of a second, there is a very good chance to save it, but if it has been in the drum for almost an hour washing machine, then it is better to say goodbye to him immediately.
Turn off your phone - if it didn't turn off when you dropped it or it was running when you dropped it, turn it off immediately. If the phone works when you take it out of the water, this is not a good sign, and the degree of damage can only be assessed after a certain time.
Disconnect the battery and, if possible, disassemble it. The battery must be disconnected immediately, otherwise a short circuit may occur, and the thin wires and microcircuits of the phone do not need much to damage them. Therefore, the power source must be immediately removed, at the same time the battery may be saved.
Remove the SIM card. If you store phone numbers on the card, and not in the phone's memory, removing the SIM card will help save them. The longer the SIM card is in the water and remains wet, the greater the risk of damage to it.
Do not try to turn it on until it is completely dry - you will not be able to make sure that the phone works right away, and any attempt to turn it on while it is still damp inside can only do harm. It will dry for at least a day, but it’s better not to touch it for a week, it will be much more reliable. So leave him alone and don't worry.
What should I do if my phone falls into water? There are also so-called people's councils. You can secure your phone by immersing it in alcohol (according to unverified reports, vodka) immediately after contact with water. As you know, alcohol is harmless even for microcircuits and thin connections, besides, it absorbs water. So, immerse the phone in alcohol, it will draw water out of the phone, leaving parts intact. Naturally, first disconnect the battery.
An undisassembled phone with a battery removed can be dried in a bowl of rice, rice absorbs moisture and can help dry the phone faster, if you have silica gel on hand it can help too. It is important that the phone dries from the inside, and a hair dryer or dryer will not help with this, as it only dries the outer parts without penetrating inside. Leave the phone in a jar of rice for a few days, only then you can connect the battery and try to turn it on.
If you can disassemble the phone yourself and then properly assemble it back, have done it more than once, and are confident in your skills, then you can after getting it out of the water. Wipe the parts with alcohol or at least with a dry cloth, maybe you have a solution that will help prevent corrosion. Spread the parts on napkins and leave alone until completely dry, or dry them with a hair dryer. In the case of a disassembled phone, a hair dryer can help as it dries the parts directly, quick hot air drying will shorten the time the parts come into contact with water. Once the parts are dry, reassemble the phone and see if it works.
What else to do if the phone fell into the water? Take it to a repair shop - ideally, after drying, for example in a jar of rice or a week of rest. This is a must-have item for owners of phones with non-removable battery. Take it to a service center as soon as possible. Repairs can also help if the phone does not turn on after the measures you have taken, they can replace damaged parts or the battery. Having paid money for repairs, you may not lose the data on your phone - numbers, photos, messages. For some, this is much more valuable than any amount.

If nothing worked

What to do if the phone fell into the water and could not be saved. All goes to good!

Now you have a toy non-working phone for a child, which is both "like a real one" and does not make any sounds, which makes both you and the child infinitely happy.
You can change the phone to the one you have long wanted, because there is a reason.
You can arrange competitions - who will throw the broken phone the farthest.
Arrange a funeral for the phone, come up with a memorable speech. At the same time, amuse your friends.
You can nail it to the wall with a nail, it will look very impressive.
If you are unable to buy right now new phone, ask your friends, there will definitely be someone who changes phone models not because they are out of order, but simply because. that they are outdated or out of fashion. Practice shows that older models are often much more reliable than modern ones.

This situation can happen to almost anyone. Your first steps will largely depend on result subsequent restoration of the phone.

As fast as possible get it water device. If the phone gets into the water, most likely will turn off. Few smartphones are able to withstand complete immersion in water, although you can hear a lot about such waterproof devices from advertising.

In no case do not try turn on the phone - it can damage internal contacts and fully Destroy battery and other device components.

At once remove the back cover and get it battery, if your phone model allows it.

Get it too sim card and memory card(by the way, they can also be damaged by moisture), spread it all out on dry towel. Carefully wipe surface with a dry cloth.

Then follows take apart machine using a set of small screwdrivers. Do this if you are confident in your abilities by watching the disassembly guide from experienced specialists in Youtube videos specifically for your model.

With a scalpel, carefully pry the body for disclosure.

In general, you need block by block take apart phone, into as many parts as you can handle. This is necessary for better and faster drying.

Good way - dry in raw rice. You need to dry it in an unassembled state, you just need to disconnect the battery.

Rice will take moisture, absorbing it into itself.

Do not do it also dry the device with a hair dryer - hot air can damage the device. In this way, water drops from the surface can be blown into the interior or parts of the device can be melted.

Ovens and microwaves, as you understand, for these and other reasons, also disappear.

Dry your phone at least a day, and better a few days- the longer it dries, the more likely it is to start again.

Shake and turn the phone as little as possible, in this case it is better not to touch it until the drying is complete.

Consequences of getting water in the phone

After the event, collect and try turning it on device. If everything is done correctly and after the dive no serious damage was done to the elements, then the phone will start.

If the phone does not start, try turn on with the power cable connected - it worked, then the probable cause is the battery, it will need to be replaced.

Otherwise, you will have to carry it to a service center and give a certain amount for restoration. For recessed phones not covered by warranty so repairs will be at your own expense.

May be damaged display or main microcontroller, in such cases it is sometimes easier to buy a new device than to try to revive the old one. Another unpleasant moment is that if a SIM card or memory card is damaged, you can lose a lot of valuable information - contacts, photos, videos, etc.

Popular in category: