the main › Advice › Hard disk from a laptop via USB. Connect the hard disk to the laptop. Briefly about drives that are found on laptops

Hard disk from a laptop via USB. Connect the hard disk to the laptop. Briefly about drives that are found on laptops

Many users ask how to connect hDD laptop to computer? The answer is unequivocal, "yes"! And make it very simple, about it next.

And so here is the main correct sequence. First of all, you need to turn off the laptop and get the battery (it is necessary to get the battery as it continues to feed the disk).
We unscrew the cover on the storage place of the HDD laptop and unscrew the disk itself and take care gently.

Connecting to a stationary personal computer occurs as well as a conventional hard drive. To do this, we need two SATA and SATA cables or adapters.

Next, connect the cable to the hard disk power and date cable, and then in the system unit, one to the SATA time on the board, and the second to the power supply - block (stationary PC should also be turned off).

This is all terrible at first glance, the operation is performed, pleasant work.

If you filter all the complex and unnecessarily demanding options, it can be argued that there are three options for connecting hard disk PC notebook:

Physical connection of the Winchester from a laptop to a personal computer. Remove from one device and connect to another, everything seems simple, but there are nuances.
Use a special "boxing", it is "pocket" for hard drives. it peripheral device Internal or external type, allowing you to use hard drives almost as DVDs. Or, more precisely, like VHS cassettes in old video players.
Physical connection

Although the process itself does not require special knowledge and it is easy enough to execute, but still its application requires accuracy and accurate execution of the instruction. It is also recommended to use thin gloves with anti-static material.

First of all, it is necessary to withdraw a hard drive from a laptop. For which it is necessary to unscrew screws (as an example used ASPIRE laptop).

After it should be removed the laptop cover, unscrew the screws fastening hard drive to the device and remove all the plugs.

At the second stage, it is necessary to turn off the PC system unit and remove the cover from it.
Next, we look at which interface in the hard disk from the laptop, and we are looking for the corresponding adapter / connector on motherboard.
Next, you need to attach the Winchester to the motherboard and fix it.

Fixing the Winchester can be included PC. As a result, a hard disk from a laptop should appear in the My Computer menu. Or more if it was divided into logical sections.

Note

In the hard drives there may be one from two connection connectors:

IDE is a very old interface that allows you to transmit information at a speed of 133 MB / s. Hard disks with such an interface are no longer manufactured, but it can be seen inside the old PS and laptops.

SATA version I, II or III provide speed 150MB / s, 300MB / s, 600MB / C, respectively. There are no compatibility issues in different versions, therefore it is not necessary to worry about it is suitable for a computer or not.

Connection by specifically pocket (Box)

This method is a bit simpler, but for it you need to have to buy or get a special Box for hard drives.

It can be as internal - used as a CD drive.

So the external used as a typical peripheral device.

Whatever pocket you use, you must first remove the hard drive from the laptop. As it is done above, in the description of the physical connection.
After that you need to open a pocket.

And connect a hard drive to it.

At the end, you must restart the computer in order for the system to determine and connect to the Winchester.
The local network

In addition to the two listed methods, the hard disk from the laptop can be unimited to connect to the PS via the local network. However, for this it is necessary that the laptop is in working condition and it has a built-in network card with a standard LAN connector. If all this is, the laptop and computer are connected by a conventional network cable.

For this you need:

Open the control panel.

Launch the service "Network Management Center ..."

After you need to click on the "Changes of Adapter Parameters".

Click on "Connection on the LAN".

6. We are looking for in the String window "Internet Protocol version 4 TCP / IPv4", double-clicking the left mouse open it.

We rearrange the switch on manual input Addresses and introduce numbers as in the image.
How to connect a hard drive from a laptop to a computer
Restart a PC and a laptop.

There are two interfaces connections hard IDE and SATA disks.

The oldest and already rarely encountered IDE (Integrated Drive Electronics) is a parallel drive interface ( hard diskoV and optical drives) To the computer.

Connects to the computer motherboard using the IDE cable. The laptop connects directly to the motherboard or with an adapter.

SATA (Serial ATA) is a serial data exchange interface with information storage. SATA is the development of the ATA parallel interface (IDE)

The computer is connected to the motherboard using SATA cable. The laptop connects directly to the motherboard or with an adapter.

Remove the hard disk from the computer is quite simple, for this turn off the computer power (pull out the cord 220V from the computer power supply), remove the side cover, pull out the cables and unscrew the hard disk.

In a laptop, in order to pull it out, you need to turn off the laptop, pull the power cable, pull out the battery, and unscrew the pair of bolts on the housing (it is rare on what laptops you need to disassemble it completely, it is usually enough to unscrew the lid for hard drives).

How to connect a hard drive to a computer (inside system Block).

So, you pulled the hard drive from the computer / laptop your goal to connect it to the computer. First of all, look at the hard connector iDE disk or SATA, then looking for a connector for you on the motherboard and connect,

Do not forget to connect the power. If you have any connection problems you can use the adapter.

If there is no necessary connector on the motherboard, use the method described below.

It is more difficult, if the hard disk needs to be connected to a laptop, since there are no additional connectors on the motherboard for laptops. But do not despair. In order to connect a hard drive to a laptop, you must use the SATA-USB adapter (or IDE- USB). Varieties of such adapters a lot. They are designed both to connect only SATA drives or IDE and the possibility of connecting and those and others. The essence of the connection is simple - the rigid disk is connected to the adapter, the adapter itself turns into a 220V outlet, then the USB adapter connector is connected to a laptop or computer, on computer hard The disk is displayed as another partition in which you enter and copy all the necessary files and folders.

Universal SATA-USB Adapter, IDE-USB SATA- USB Adapter
The cost of such adapters on average from 500 to 1000 rubles.

And suddenly you need: how to connect the hard drive of the laptop to the laptop, and not only ...
Practice shows that the likelihood of the need to connect a hard disk of one of the computer devices to a laptop or the realization of the opposite of the reconnect scenario is exormably large. The precedent of this can be suddenly or naturally manifested by the "digital trouble" ... The methods described in the article are called upon to help the user breaking down in solving the frequent difficulty, how to connect a hardbook hard drive to a laptop. Of course, a valuable material consisting of exceptionally effective recommendations will affect all the options for interface-interaction of various information drives in order to obtain full access to data on them.

Retail in the single purpose of the hard drive: a threat to a healthy psyche

Wow, how everything is confused! Stationary computers are equipped with one type of drives, laptops and a separate type of computing devices with the NET prefix - others. However, all these devices have a uniform universal ability - storage and processing of information. So, the "interface-difference" when solving the question, how to connect a hard drive from a computer to a laptop ", you can get around. And also avoid often arising (at the "victim of technological circumstances") the state of light confusion, when the hard disk of the failed PC is the extremely necessary data that "right now" is found. Relax, dear reader, - there is a way out! Translate your breath ... and not even in a single version!

How to connect a hard drive to a laptop: instructions for SATA devices
Let's figure it out in detail in such a situation: there is a working laptop to which the HDD must be connected from the PC.

First of all, you need to purchase a special SATA-ESATA adapter, when choosing which you need to be guided technical characteristics Receiver device. In our case, this is the presence of a "favorable" ESATA connector from Laptop.
Most modern portable configurations have this interface. What ultimately will be a kind of answer to the question of how to connect a hard disk to a computer or laptop.
If your laptop has this type of interface, then the further initialization process passes almost instantly. The operating system will literally immediately determine the connected device as external storage. Moreover, the speed of operation when organizing this kind of synchronization process is incredibly high, up to 6 Gb / s. Agree, with such parameters, it is sufficient to comfortably interact with the data of any (within reasonable limits) of the volume.

Guide for IDE Winchesters: Universal USB Port
How to connect a hard drive to a computer (laptop) if the drive has a somewhat outdated interface, and the laptop has only a universal USB connector? Undoubtedly, enough "complex symbiosis". Nevertheless, as mentioned earlier, there is a way out!

Everything is resolved using a special adapter that connects to a laptop using a USB cord.
The input IDE connector device allows you to attach a PC hard drive, and a separately displayed cable is activated as a feeder.
As a rule, such devices are often universally applied gadgets. Since often there are two types of connectivity - SATA-USB and IDE-USB - using one adapter controller.

"Brotherly understanding": two cords decide everything!
You will not have a question how to connect a laptop hard drive to a laptop if your laptop has a previously mentioned serial interface, and your "reconnect" -Anal has an ESATA to SATA adapter (7 + 15 PIN). Otherwise, you should give a visit to the nearest electronics store and buy an inexpensive "pocket" for external HDD.

This option is most appropriate for the optimal solution of voiced difficulties. Since the owner of such an HDD container may well use the acquired device (in the future) for purpose - as an additional external information storage.

By the way, the "HDD-pocket" can be connected not only by ESATA interface, but also on a universally used USB port. What will incredibly facilitate the situation when you need to attach a 2.5-storage device of a portable computer to a stationary PC. Do you see the benefit from such an acquisition?

Culminated final: extreme lifting of information by the "Tyka" method
When solving the question, how to connect a laptop hard drive to a laptop if the situation requires operational access to the external hard drive and, provided that there is no necessary adapter, but there is a flash drive and access to Unternet:

Download Live USB distribution.
After you create a bootable Flash drive, turn off and de-energize the laptop.
Remove the Device battery.
On the back of the laptop, find the HDD text design, which is a kind of guidelines that indicates the location of the installed hard disk of the laptop.

Unscrew the protective cover and carefully pull out the HDD.
In the liberated place, install the Winchester on which the necessary information is kept (urgently!).
After you boot from the flash drive - you can familiarize yourself with the "secret data".

That is how it is possible to get a practical answer, how to connect the hard disk of the laptop to the laptop. The main techniques for accessing stored on outdoor HDD. information was considered completely. Good luck to you and all the best!

Connecting a hard disk from a laptop to a computer
Any user may have a desire to connect a hard drive from a laptop to a computer, for what purposes it does not matter to us, but if he does not know how to do it, reading this guide For him, everything will become clear.

As an example, the following can be given: a laptop broke on which you worked hard and hard on some kind of project, repairing the thing is not fast, and the deadlines are pressed. In order to start editing or refining a project again on another computer, you can put a hard disk with a faulty laptop there.

Existing interfaces
For connecting hard disks and SSD there are two interfaces - SATA and IDE.

SATA - presented in all modern laptops and computers, with more opportunities than the IDE. It has 7 contacts for data transmission and 15 contacts for power. This can be seen in the figure below.

IDE - standard outdated, but still occurs in many devices, the truth is old. It released more than ten years ago, it looks like a 40-pin connector for data transmission over a special loop and 4-pin power port.

If you need to connect the hard disk with the SATA interface to the IDE connector, the adapter will be required.

mSATA - this format The miniature form is most often found in the latter generation laptops.

If you have a desire to connect this interface to the PC, you will need an adapter, because even many modern motherboards there are no similar interface.

M.2 - the format is even less than MSATA, performed by this SSD format are often found in ultrabooks. The interface is usually found in 3 types:

View B with a neckline to the left edge;
View M with a cut-out to the right edge;
View B & M with both cutouts on both sides. This type You can connect to slots B and M.

Personal computers on motherboards are found very rare.

How to connect the hard drive to a computer to a computer?

So, here everything is really easy. In order to connect a hard disk with the SATA interface from a laptop to a computer, you will need a SATA cable (more correctly, of course, to speak the loop). This loop is needed for data transfer. Next, we need a cable for the power supply.

So, one end of the SATA loop connect to the hard disk, and the other to the connector on the motherboard. There may be several connectors that are indicated by 3 GB / s and 6 GB / s, where to connect to you, this is just the data transfer rate.

The same with the power supply.

Connecting the IDE interface

If you have an IDE interface, then you need a 40-pin loop and Molex cable for the power supply.

The computer can read the inserted drive as a native and load with it so that this does not need to be switched to the Slave slave position. Usually on the contacts of the disc itself there are jumpers located near the port of the power port, they translate the disk to the "slave" position. Unfortunately, I can't tell you where they are specifically, each drive is different. Read the manual or find the information on the site of the hard disk manufacturer.

How to connect drives with different interfaces?
If you have a disk that has a connector that is not available on the motherboard, you will need an adapter. They are different typesFor example, these are:

Adapter with SATA on IDE or vice versa.

There are many other combinations. If you need it you can search for goods on the Internet.

What if you need to put a small drive into a computer case?
Many users still have old housings that do not allow compactly place a hard drive from a laptop. What to talk about modern buildings, they already have special blocks (baskets) to accommodate HDD and SSD in them.

You can try to purchase special adapters for 2.5 or 3.5 inch drives. Even for 1.8.

Before connecting to a computer, the drives are recommended to completely de-energize it.

Any user may have a desire to connect a hard drive from a laptop to a computer, for what purposes it does not matter to us, but if he does not know how to do it, then reading this guide for him everything will become clear. As an example, you can lead the following: broke a laptop on which you long and stubbornly ... Evilsin225andrey [email protected] technology
computerInfo.ru.

How to connect a hard drive from a laptop to a computer: internally or externally
The laptop is a laptop computer on which many users store important information. By virtue of its form factor, the laptop may come into disrepair, for example, fall and crash. In this case, the likelihood that the hard disk of the portable computer remains intact, from which the data can be considered, and if necessary, it can be used in the future. Connect the hard drive from a laptop to a stationary computer can be in several ways by installing it into the system unit housing or via a USB connector. Consider both options.

How to install a hard drive from a laptop in a system unit
The hard drive from the laptop is practically no different from the standard hard disk for the computer. Its only serious difference is sizes. For conventional system blocks, a 3.5-inch drives are used, while for laptops, for the purpose of saving space, wheels of 2.5 inches are used. Accordingly, since the disk from a laptop is smaller than the standard disk for the system unit, it will not be able to securely secure and fix inside the case.

To install a hard drive from a laptop into a system unit, you will need to purchase special sleds for 2.5-inch drives. They must be installed in place for a 3.5-inch hard disk and secure. After that, a 2.5-inch disk is attached to these salazzo.

Please note: the enclosures of some computers can initially provide for installations for installation and fastening of 2.5-inch hard drives.

When the hard drive from the laptop is "planted" in the system unit housing, you must connect it. Disk Connection Standard:

It is required to connect the SATA cable from the motherboard to the hard disk;
Next connection is connected.
Following the actions described above, you can turn on the computer. After download operating system Hard disk will be displayed in the list of drives. If this does not happen, it is necessary to check in the BIOS, whether the loading of this disk is installed.

How to connect a hard drive from a laptop to a computer via USB
You can connect a hard disk to a computer via a USB connector, in this case there is no need to disassemble the system unit. At the same time, connect via USB 2.5-inch drive can different ways, Consider three main.

Use of adapter

You can find special adapters that allow you to connect a 2.5-inch hard disk to a USB connector. There are connectors in the form of SATA and nutrition on such adapters.

Please note: if your computer has USB connectors of class 3.0, it is better to purchase an adapter with such a protocol so that the hard drive worked faster when external connections.

Using a removable housing

Similar to the last version of the hard disk from a laptop to a computer, but instead of the adapter uses a full-fledged case. Inside such a housing is the SATA connector and nutrition. The hard disk must be placed in the case, after which the USB cable will be used to connect it to the computer.

The use of a removable case allows not only to connect a hard drive to a computer, but also to protect it from damage in case of falling.

Important: When buying, pay attention to the body is intended for hard disks with a size of 2.5 inches, since you can also find options for connecting full-format 3.5-inch computer discs via a USB connector.

Usage Docking Station

The most interesting and expensive option to suit users who have to connect hard drives to a computer often implies the use of a special docking station. You can find docking stations that allow you to connect several 2.5 or 3.5-inch discs at once. Some docking stations can simultaneously connect hard drives of different sizes.

The above is considered simple waysHow to connect a hard drive from a laptop to a computer. If such a thing has to do often, it is better to get a special docking station. In a situation where the disk from a laptop must be forever installed in the system unit, it is easier to disassemble the case and connect the drive inside it so that it does not occupy one of the USB connectors.

How to connect a hard drive from a laptop to a computer
I think someone often works for a laptop, sometimes got into a similar situation: you need to copy many files from the laptop hard disk to the hard disk of the stationary computer. How to do it?

Option 1. Just connect the laptop and computer in local network and transfer files. True, if the speed you have on the network will not be high, then this method takes a lot of time (especially if you need to copy several hundred gigabytes).

Option 2. Remove the hard drive (HDD) from the laptop and then connect it to the computer. All information from HDD can be copied very quickly (from the minuses: you need to spend 5-10 minutes for connecting time).

Option 3. Buy a special "container" (box) in which you can insert hDD laptopAnd then this box is connected to a USB port of any PC or another laptop.

Consider in more detail the last pair of options ...

1) Connecting a hard disk (HDD 2.5 inches) from a laptop to a computer

Well, the first thing you need to do is to get a hard disk from the laptop housing (most likely you need a screwdriver depends on your device model).

You must first de-energize the laptop and then remove the battery (the green arrow in the photo below). Yellow arrows in the photo marked the fastening of the cover, followed by a hard disk.

After remove the lid - remove the hard drive from the laptop housing (see the green arrow in the photo below).

IDE is an old interface for connecting a hard disk. Provides connection speed at 133 MB / s. Now it is still less common, I think in this article there is no sense in this article ...

SATA I, II, III - new interface HDD connections (provides speed 150, 300, 600 MB / s, respectively). The main points associated with SATA, from the point of view of the usual user:

There are no jumpers who were earlier on the IDE (and therefore the hard disk cannot be "incorrectly");

Higher speed;

Full compatibility different versions SATA: You can not be afraid of conflicts of different equipment, the disk will work on any PC, through which version of SATA it would not be connected.

So, in the modern system unit, the drive and hard disk should be connected via the SATA interface. For example, in my example, I decided to connect the hard disk of the laptop instead of CD-ROM.

Actually, it remains only to turn off the wires from the drive and connect the HDD laptop to them. Then tritely enable your computer and copy all the necessary information.

It can be noted that the disc is now displayed in "My Computer" - i.e. with him you can work as with the usual local disk (I apologize for the tautology).

By the way, if you want to leave the disk connected constantly to the PC - then it must be fixed. To do this, it is best to use special "sled", which allow 2.5 inches to fix wheels (from laptops; less in size compared to computer 3.5 inches) in compartments from ordinary HDD. The photo below shows such "salazzas".

2) Boxing (Box) for connecting the HDD laptop to any USB device

For users who do not want to "mess around" with dragging discs there and here, or, for example, they want to get a portable and convenient external disk (from the remaining old laptop disk) - there are special devices on the market - "boxes" (Box).

What he really is? A small container, slightly more than the size of the hard disk. In it, as a rule, there are 1-2 USB ports to connect to PC ports (or laptop). Boxing can be opened: the HDD is inserted into the inside and is fixed there. Some models, by the way, are equipped with a power supply.

Actually, all, after connecting the disk to boxing, it closes and then it can be used with boxing, as if it were usual outdoor hard disk! The photo below shows such a Boxing of the "Orico" brand. It looks almost no different from external HDD.

If you look from the back on this box - then there is a lid, and behind it a special "pocket", where the hard disk is inserted. Such devices are pretty simple and very comfortable.

The situation when a hard disk is required from a laptop to connect to a computer, usually occurs in two cases:

it is necessary to copy a large amount of data from the hard drive;

the laptop was out of order, so you need to extract information from it.

In the first case, it is not necessary to disassemble the laptop and remove the hard disk, the most reasonable solution will be the use of a special cable, which is called patch cord, to connect a laptop to a computer and transferring data.
patch cord for connecting hard disk "\u003e
The only nuance of such a connection is the fact that to transfer data between a computer and a laptop to bind both devices in the home group through the settings of the operating systems.

To implement the second option, do not do without preliminary disassembly of the laptop and disconnecting the hard drive. How to do it first of all from the model of the laptop used, but you can still allocate common steps.

The process of extracting a hard disk from a laptop:

turn off the device, disconnect the power cord and remove the battery;

turn the laptop and inspect the bottom, it is possible that access to the hard disk is carried out through a special compartment, which eliminates the removal of the entire bottom;

unscrew the screws that hold the compartment if it is (otherwise, it is necessary to remove all attachments that hold the bottom of the design);

pull the hard disk from the motion connector, directed in a strictly opposite direction, and pull it out.

Connection of the hard drive directly to the computer motherboard

This is the first option of connecting the hard disk of the laptop to the stationary computer. To make it necessary to do the following:

turn off the computer and disconnect the power cord from the power supply;

remove the side wall of the system unit;

using the SATA cable, connect the hard disk to the system board;

test to the hard disk cable from the power supply;

reliably fix the hard drive, fasten the lid and turn on the computer.

After connecting this method, the hard drive will be displayed in the system as a local disk.

If you do not have spare SATA wires to connect hard drive, you can temporarily remove similar from your drive.

In case you want to install a hard drive of a laptop into a system unit and constantly use it to use it, it is necessary to fasten the hard drive using special sled.

Salazki for winechester

Salazki, allowing to fasten a hard disk that has a size of 2.5 inches, in the compartment of the system unit of 3.5 inches.

Connecting hard drive through special devices

This method is simpler compared to the option outlined above, since it does not require a singular computer parsing.

Use SATA-USB adapter

There are many varieties of such adapters. Typically, these devices have several connectors, with which you can connect both SATA and IDE discs.

Use Boxing for Hard Drive
You can find a special device that allows you to turn any laptop hardware into a full outer outer hard disk. Usually such a device is called boxing (from the English word Box, which means the box). Boxing is a small container, the hard disk is inserted inside. Connecting the box to a computer takes place through the USB connector.

When buying boxing, the physical size of the hard drive, which you want to connect to it. There are two types of boxes:

for hard disks of 2.5 inches;

for hard disks of 3.5 inches.
Hard drives can be from different manufacturers, have different physical dimensions and type, but all of them have standard connection interfaces, that is, the connectors with which they connect to the laptop motherboard and power supply.

A little about the interfaces of hard drives

The most common interfaces are SATA represented by two connectors - 7-pin data transmission and 15-pin for power supply. In the latest laptop models, you can often find SSD discs with the MSATA interface, which differs from SATA more compact sizes. SSD disks with M.2 interface are much less common, used mainly in ultrabooks.

Their connectors are three types: B, M and B & M, differing from each other by the number of contacts and the location of the cutting on the board. B and M SSD discs can be connected to a slot only of the same type, while B & M discs are compatible with types B and M. Once common HDD disks with IDE interface (PATA) having a 4-pin power connector and 40-pin connector for Data transfer today can be found perhaps on old computers released more than 10 years ago.

Connecting a laptop disk to a motherboard with an interface of the same type (SATA)

Everything is relatively simple here. You will need a SATA loop for data transfer and a 15-pin connector on the cable connected to the power supply. As a rule, in desktop computers there are free power cables with appropriate connectors at the ends. If the last sudden will not be, like the SATA-loop, it will be possible to purchase it at any computer store. Alternatively, the loop and power cable can be temporarily disconnected from the drive and use them later to connect to the hard disk.

Next, remove rear cover Laptop and unscrew the bolts, carefully remove the hard disk with the fastener frame, which will also need to be removed. After that, we take the SATA loop and connect it with one end to the disk, and the second one from the ports on the motherboard. You do not sleep anything, because cable connectors have their own keys. Usually on such ports indicates the type, in this example SATA, and transfer rate.

In terms of compatibility, the port speed does not have the value. For the sim plug the power cable to the disk, turn on the computer and go to the BIOS in order to make sure that the disc is identified and the download priorities are set correctly.

Note: After removing the fastener frame, try not to touch the disc card with your hands, keep the disk for the ends. Also ensure that the surface of the board does not in contact with metal surfaces.
Connecting a disk to a motherboard with another type interface

To connect IDE-, MSATA and M.2-disks to motherboards with SATA support, a special adapter will be required. A lot of adapter models, although not all of them can be found on sale.

Many adapters support USB interface, which eliminates the user from the need to climb into the system unit. For the same purposes, it is possible to use so-called boxes - equipped with their own board and a USB connector for external hard drives. Such boxes not only provide a quick and convenient connection of discs with a similar or different interface, but also protect the disk from random damage.

Users of personal computers, laptops and netbooks often face the need to connect additional external devices to a computer. One of these devices is an external hard drive.

The need for a disk connection can be related to a significant number of files on a laptop, an exchange of information with other devices or organization external storage data. Sometimes the user just remains old hard The disc that he intends to continue to use.

With a decrease in size, modern laptops include a significant variety of drives of various types.

Diagram Disable Hard Disk from PC

In laptops are usually used 2.5-inch hard drives, because They are smaller in size and consume less energy than 3.5-inch drives installed in desktop PCs. However, a 3.5-inch disk, from an old PC, can be successfully used as an external drive.

Step 1. Turn off the computer and turn it off from 220 volts power to accidentally turn on the PC when removing the hard disk.

Step 2. Open a computer case, most often by removing the right sidebar (side view from PC connectors) After unscrewing the fastening screws or pressing the button and removing the panel along the housing in the rear side and the Block.

Step 3. Find a hard disk inside the PC housing. The hard disk is a rectangular metal box with a size with a small book and is usually placed in a special compartment of the PC housing.

Step 4. Hard disk is usually connected to PC with two cables. Carefully inspect the cables and carefully pull them out of the connectors.

Important!The dismantling actions are made with some, but not extremely significant efforts. Before removal, it is necessary to carefully examine the item and take an appropriate decision on the method of dismantling it.

Step 5. Consider the method of fastening the hard disk, and by choosing the appropriate method, remove it. The disc can be fastened with screws or be in the housing on special "sleds" with latches on the sides, moving through the removed front panel of the case.

Connecting an external disk to a laptop

For connecting outdoor hard The disk is the first thing that needs to be done is to determine its size.

Step 1. If the size of the drive is unknown, you can measure its width. Hard drives have a rectangular shape, and its width determines its size (form factor) in the title. The width of the 3.5-inch drive is 10.2 cm, and the width of 2.5-inch 7 cm.

We measure the width of the hard disk, the width of the 2.5-inch disk 7 cm, 3.5-inch - 10.2 cm

Step 2. Next, it is necessary to determine the type of hard disk connection to select a compatible housing that serves as a "adapter" to connect the disk to the laptop. In old computers, hard drives were used with IDE connection, today they use drives with connecting SATA..

Consider the type of hdd contacts. The IDE connector consists of two rows of metal pin contacts for data transmission, as well as a separate hard disk power connector. The SATA connector includes two small plates with flat contacts for transmitting data and power to drive.

Step 3. Purchase a housing corresponding to the size and type of HDD connection, as well as the type of it to connect to the laptop. For example, to purchase a 2.5-inch case with SATA connected for a 2.5-inch SATA disk.

Most hard drive enclosures have a connection type to a computer with a USB 2.0 interface, as well as FireWire, as they are today the most popular. Some universal housings have a combination of both interface options.

Most USB 2.0 enclosures are compatible with any USB-port laptop or netbook. However, the hulls having a USB 3.0 interface provide more high performance When connected to the USB 3.0 port.

Reference!All sold today personal computers Equipped with USB 3.0 ports, so you can purchase a hard disk housing with USB 3.0 interface, making sure that this type connector is available on the laptop.

It is also important to take into account that 2.5-inch cases usually receive power from the PC connected USB connector (port), and they do not have their own power adapter, which makes them completely tolerable.

At the same time, the 3.5-inch hard drives need more power supply, so the AC power adapter is usually supplied with their enclosures, which means that they will not work where there is no power outlet.

Step 4. Installing the hard disk in the outer case is very simple. Typically, the maximum that is required in this case is a screwdriver. Most often, it is necessary to remove the top cover of the housing, position the hard disk inserted into it parallel to its base, and carefully drive the disk to the contact pad to connect it. Close the housing cover of the hard disk (see photo).

Reference!To connect the hard disk to the case, you must refer to the instruction supplied with the HDD housing.

In some cases, on old 3.5-inch disks, it may be necessary to rearrange or remove the jumper by installing a hard disk as a master (master) or subordinate (Slave) device in accordance with the instruction of the housing.

An option of connecting 3.5 and 2.5-inch hard to a special docking station is also possible. In this case, it is necessary to gently insert a disk into a suitable connector in size, slightly pressing on it to reliably connect the contacts of the disk with the station.

Step 5. After connecting the hard disk to the case, it is necessary to connect the housing with a laptop connector with a special cable that comes in the kit.

For this:

On a note! To supply the enhanced power to a 2.5-inch hard disk, an option is also possible to connect a second USB connector located on a cable that is included with the housing.

In addition to special enclosures for connecting a hard disk, an open version of the HDD connection is possible through a special adapter that is powered by its connector.

Connecting an "old" disk in Windows

If the hard disk before it has already been used in Windows, it means that it has already been formatted. In this case, when connecting it will automatically be assigned a letter in the system, and it will appear in windows Explorer, already ready for use.

If the disk in the system did not appear, it may be necessary to install the driver for the hard disk housing.

Step 1. Press the keyboard key "Win + R". In the running window "Run" to dial "devmgmt.msc" and click "OK".

Step 2. Run "Device Manager". View the dispatcher on the presence of devices in it with exclamation signs. If this device is available, click on it right-click Mice, and select "Update Drivers" in the menu.

Step 3. In the running window, click on " Automatic search updated drivers. "

After finding the system of the desired driver, the exclamation mark from the device in the "Dispatcher" will disappear. It may be necessary to restart the PC.

If the hard disk in the system does not appear, and at the same time the CD drive with drivers is included with the HDD housing, then you need:

Step 1. Insert this disk into the laptop optical drive drive by opening it by pressing the button and snaps it back after installing the CD.

Step 2. On the desktop twice with the left mouse button, click on the "Computer" icon.

Step 3. A list of Windows disks and devices opens. Disclosure CD drive double mouse.

Step 4. Find in the folders running file "RUN" or "SETUP", double-clicking on it with the left mouse button.

Step 5. Install the desired software In accordance with the proposed procedure of action. HDD will appear in the system.

Connecting a new disk to OS

If the connected hard drive has not yet been used in Windows, it will not appear in the explorer, since it has not been initialized and formatted.

Step 1. Press the combination of the "Win + R" keys on the keyboard. Run the "Run" window. Dial in the "diskmgmt.msc" string and click "OK".

Step 2. Run windows utility "Disk Management". Find in the left column disc, signed as "not initialized", and click on it with the right mouse click, selecting the "Initialize Disk" in the opening menu.

Step 3. Put a tick on the HDD initialization required. Put a tick on "MBR" if HDD has a capacity of less than 2 TB and "GPT", if more, and click "OK".

Step 4. After initializing the disk, it will be translated into the "not distributed" state. Click on the retained HDD space with the right mouse click and click the left button to "create a simple volume".

Step 5. In the wizard that appears, click "Next."

Step 6. Leave default settings, click "Next".

Step 7. Select the letter in the drop-down list, which disk will be identified in the system, click "Next".

Step 8. Select the file type of file (usually NTFS) and the volume label (any HDD name in the system), put a check mark on "Quick Formatting" and click "Next".

Step 9. Check the entered information and click "Finish".

The disk will be formatted and ready to use.

As soon as the connected external drive earn, you can exchange with any files.

find out detailed informationHow to install, in our new article.

Video - Three ways to make an HDD (hard disk) external hard drive

Hello everyone. If you need to connect a hard drive from a computer to a laptop, then I'll show you now, how easy it can be done.

For example, I need to throw off very urgently 500 gigabytes of data from a computer on a laptop. Agree to transfer it to all, using a flash drive, even by 64 gigabytes, we still need a ton of time. It is better to directly connect a hard drive to a laptop and take all the data at once.

Remove your hard drive from the computer

First of all prepare a hard drive. If it is still inserted into the computer, then unscrew the cover of the system unit, turn off the 2 cables from the disk and remove it from the compartment.

Prepare SATA cable - USB

To connect a hard drive from a computer to a laptop, we will need such a cable and meals:

Such a cable I bought on Aliexpress. If you need, here is the link, where I bought it: http://ali.pub/2057d2.

Be careful, order just such a cable. from additional nutrition Because if you order without meals, it will not work with a big disk from the computer. Cable without food is designed to work with small disks from a laptop!

Connect the disk to the laptop

One end of the cable is connected to the disk, and the USB is inserted into the laptop. Network adapter insert into the outlet.

Check performance

After connecting, we wait a few seconds until it is set necessary driver, then, reboot the laptop and then go to the computer section and check the disk. Here he also appeared broken into several sections, as it was on my computer:

It is worth understanding that in this way you can connect the disk not only to the laptop, but also to the computer, for example, when it is not hunting to open the lid of the system unit.

Use if necessary. So far!

In order to connect a hard disk from our laptop to a PC, you first need to remove the hardbook from the laptop, this is done like this:

Connect a hard disk to a computer

The first thing is opening the system unit (unscrew the side cover and remove it aside).
Find on maternal sATA board Ports (they are depicted in the picture), which are not inserted wires.
SATA ports on the motherboard
Now we will need SATA cable, to connect a hard disk to a computer. You can find this in any electronics store, by the way it is inexpensive.
SATA cable
SATA cable has two identical end, therefore, one of the ends of the cable connect to the hard disk.
And the second end is inserted into the SATA port on the motherboard.
SATA Cable in Port
Now you need to connect the power to the hard disk. To do this, we are looking for a free wire that comes from the power supply and connect it to the hard disk.
Connect the power to the hard disk
The hard disk from the laptop is connected to the computer, now we turn on our PC. After loading the operating system, go to my computer and see the display of our hard. Now you can use this hard, in any appointment.

Box to connect a hard disk to a computer via USB

The technique does not stand still and trying to make life easier for us. A special Box appeared on the market, which inserts a hard disk and is already connected to a computer or to another laptop, via USB.

Box for disk

Box is a rectangular box in which the disk is inserted.

Box for Hard

Such devices often have built-in power supplies. They are needed in order if the power of the USB port lacks for the hard disk.

Why connect a hard disk from a laptop to a computer?

This question is infinitely many answers. Many who have work is related to work on a laptop, store working information On your portable computer. And sometimes the memory on the laptop is not enough and then you have to throw off some files to a stationary computer. It also happens that the laptop broke, and it was important files that needed. In fact, the options for answers to this question is mass, because everyone has different situations.

Video on how to connect to a computer, hard drive from laptop

If the text instruction was incomprehensible or if you have any questions, see the video, on how to connect a hard drive from a laptop to a computer.

The situation when a hard disk is required from a laptop to connect to a computer, usually occurs in two cases:

it is necessary to copy a large amount of data from the hard drive;
the laptop was out of order, so you need to extract information from it.

The only nuance of such a connection is the fact that to transfer data between a computer and a laptop to bind both devices in the home group through the settings of the operating systems.

The process of extracting a hard disk from a laptop:

turn off the device, disconnect the power cord and remove the battery;
turn the laptop and inspect the bottom, it is possible that access to the hard disk is carried out through a special compartment, which eliminates the removal of the entire bottom;
unscrew the screws that hold the compartment if it is (otherwise, it is necessary to remove all attachments that hold the bottom of the design);
pull the hard disk from the motion connector, directed in a strictly opposite direction, and pull it out.

Connection of the hard drive directly to the computer motherboard

This is the first option of connecting the hard disk of the laptop to the stationary computer. To make it necessary to do the following:

turn off the computer and disconnect the power cord from the power supply;
remove the side wall of the system unit;
using the SATA cable, connect the hard disk to the system board;
test to the hard disk cable from the power supply;
reliably fix the hard drive, fasten the lid and turn on the computer.

After connecting this method, the hard drive will be displayed in the system as a local disk.

If you do not have spare SATA wires to connect hard drive, you can temporarily remove similar from your drive.

In case you want to install a hard drive of a laptop into a system unit and constantly use it to use it, it is necessary to fasten the hard drive using special sled.

Salazki, allowing to fasten a hard disk that has a size of 2.5 inches, in the compartment of the system unit of 3.5 inches.

Connecting hard drive through special devices

This method is simpler compared to the option outlined above, since it does not require a singular computer parsing.

Use SATA-USB adapter

There are many varieties of such adapters. Typically, these devices have several connectors, with which you can connect both SATA and IDE discs.

Use Boxing for Hard Drive

You can find a special device that allows you to turn any laptop hardware into a full outer outer hard disk. Usually such a device is called boxing (from the English word Box, which means the box). Boxing is a small container, the hard disk is inserted inside. Connecting the box to a computer takes place through the USB connector.

When buying boxing, the physical size of the hard drive, which you want to connect to it. There are two types of boxes: