Budget tablet for the Ukrainian market. Reinstalling the system or flashing TEXET tablets Firmware TEXET TM 7026

By flashing tablets, most Android users are interested in many reasons: you need to update the system or there is a desire, or to return the device to the working condition.

Many are not satisfied with the standard firmware on TeXet TM7866

No matter how it is, the process itself is quite simple, but differs depending on the manufacturer. We will look at how the Texet TM7866 firmware and other brand models are performed, and how to do everything correctly to not harm the device.

What is needed to flash TEXET tablet?

First of all, let's find out what is needed to perform such an operation. TEXET TM firmware is done using such tools:

• The charged battery is best to be complete, or had a stock at least 50%;
• Computer - with its help will be overgrating;
• The PhoenIxSuit program through which the software is replaced - download and install it on the computer;
• Directly - the file with it is also necessary to download and save on the PC;
• Where to get the firmware and program for its installation? It is best to look for them on the official website of the TEXET manufacturer, navigate the series marked with TM letters. File replacement files are located in the "Support" section, then select "Downloads";
• In the window that opens, you can find files with a program and a new way android, but carefully check serial number Your device to download the appropriate archive with software.

So, when you all downloaded, install the PhoenixSuit in this way:

• Open the installer, click "Next";
• Windows will notify you that you need to install the driver, but it is unchecked - you still confirm its download;
• After confirming the rest of the items, it will take place, at the end, click "Finish" and close the window.

Now you have installed a separate PhoenixSuit program designed to replace the firmware on TeXet TM products.

How to flash TEXET Tablet?

Refracting TEXET TM7024 tablet and other models is performed using such actions:

1. I am convinced again that the gadget is fairly charged and open PhoenixSuit;
2. Click the Firmware section;
3. In the window that opens, specify the path to the file with the system in the Image string;
4. If the tablet was turned on, turn it off and press the "Home" key;
5. via USB by pressing the above key until the message with the text "Tips: Does Mandatory Format?" does not appear;
6. Answer the question approved, after which the replacement will begin software - you can watch the process directly in the application;
7. After the process is completed, the message "Upgrade Firmware Succeed" appears - just click OK.

Now you can disconnect the device and turn it on. By the way, the load will seem a bit slow. It only happens at first, because the device first launches with new security.

Before you detailed step-by-step instruction About how to flash TEXET TM-7026 tablet. Our editors selected the most suitable way to firmware this Texet model. If a this instruction Result will not give Try to flash another method: TWRP Recovery, Rom Manager, FastBoot or Classic OTA.

A warning! After the device firmware, all your data with internal memory - Will erased, so to save your contacts, settings and applications, first save all data from the tablet.

Installation of the System Method CWM Recovery 1. Charge the styled tablet at least 80%. 2. We save from the flash drive, the sim cards and the memory of the tablet all the data that cannot be lost. Simka (if any) can be pulled out. 3. Place needly firmware In the memory of the tablet. The firmware file must have an archive format zip.. You can choose and download the firmware. 4. On all TEXET tablets there are recovery from the manufacturer, so we change it to ClockworkMod recovery. We do this on such instructions: Install the application from Google Play on the tablet. Take it and provide ROOT rights. . In the Options list, select "CWM Recovery". Then the application will show a list of available recovery. In the example, Rashr showed 2 options: ClockworkMod with keypad support and classic option (The control is carried out by the volume and power button). A download request will appear. Click "Yes". Then the CWM Recovery image is started for the tablet. A notification will appear that the firmware has been successful and now you have installed modified recovery. Immediately go to it, for this click "YES". Ready. If you have already been installed clockworkmod recovery, then just enter it by clamping for 3-5 seconds any of the combinations: - Volume Up + Power Button - Volume Down + Power Button - Volume Up / Down + Enable Button + "Home" - Volume up + volume down + power button 5. The movement in the recovery menu is carried out using the volume buttons, and confirm the selection of the power button. Before installing the firmware, you must first make a reset of the settings. Therefore, in the menu, select item. wIPE DATA / FACTORY RESET.
6. Next, just confirm that you agree to make a reset: YES - WIPE ALL USER DATA.
7. Now in the main recovery menu, select install Zip..
8. After that, select Choose Zip From / Sdcard.
9. Go to the folder in which you saved the zip firmware file and select it.
10. A request for confirmation of action will appear. Choose YES - Install ....
11. The firmware installation process will begin and the inscription will appear at the end Install from SDCard Complete. The firmware is completed. Return to the main menu CWM Recovery and reboot the tablet. To do this, choose reboot System Now..
12. Ready. Loading the tablet from the already installed firmware. Other materials

Hello expensive readers. Today we will talk about the Russian budget tablet TeXet TM 7016 - Chinese production. Let's not long on it and immediately proceed to the technical parameters.

Characteristics of the tablet

This is a seven-wing tablet with a resolution of 800x600 pixels, running on the basis operating system Android version 4.0.3. The processing and distribution of resources is engaged in the Boxchip A13 microprocessor with a working frequency of 1200 MHz, a pair of 512 MB of RAM, internal memory is only 4 GB, but thank God there is a slot for an external memory card.

Appearance

There is only one rear camera 0.3MP. Optionally built-in speaker, microphone, orientation sensor and accelerometer, what to say is the same budget option.

To access the Internet network, the manufacturer provided Wi-Fi module and support for the Host mode, that is, the connection of external devices, for example:

• Modems;
• Mice and keyboard;
• Flash drives.

The mass of the budget device is about 300 grams, the size of 193x121x9 millimeters.

The equipment for the budget tablet is quite complete:

• USB cable for PC;
• HOST cable;
• Minigarintura;
• The tablet;
• Guide, warranty card;
• Charger.

Unpacking tablet: https://youtu.be/l-flbbaeg9q

Exterior Gadget

The reverse side of the device has a characteristic insert, which is very reminded by all the well-known iPad. For those who have never worked on a tablet PC, engineers have inflicted graphic designations all available connectors and keys.

Backside

On the right face you will find a headphone jack, connector for connecting charger, USB connector and an external memory card slot, as well as HDMI input to connect to any devices with a similar connector.

Right side face

As we can see on the sides, there are bolts, so be sure that it disassembles if something burned down or need to be changed.

Top side face

On the top face of the tradition, the Tablet Computer is on / off, the volume key and the mechanical return button.

To the addition, the reverse side made from the metal - most likely aluminum.

Connecting an external modem

As mentioned above, the tablet PC works on Android 4, so the setting and operation of the product will not take much time and will be intuitively understandable.

Desktop

Standard Desktop Device with Android

Menu Applications

The menu in which all are displayed. installed applications. We find the settings and click.

Setting up an external modem

As mentioned above, the tablet does not have a built-in 3G module, one has the ability to work with external devices. To do this, get a modem, buy a starting package with the Internet (modern already built-in).

It is important to know before buying checking the modem for compatibility with the device.

We connect and switch to the settings / More / Mobile Network / In this point, we turn on the data transmission - it is very important, without this it will not work. Next Access / function / function / Create a new connection point.

Mobile networks

You will be a whole list of fields to be filled in accordance with your cellular operator - you should not immediately be afraid, since only four fields will be filled out, such as:

• Connection name;
• Access point;
• Username;
• Password.

The connection point name can be any, but the rest should be as written.

APN.

• For MTS: internet.mts.ru
• Beeline - Home.Beeline.ru.
• For megaphone - Internet
• tele2: internet.tele2.ru.

Username

• for MTS: MTS
• Beeline - Beeline.
• MegaFon: Empty
• tele2 - empty

Password:

• for MTS - MTS
• for Beeline: Beeline
• MegaFon - empty
• for Tele2 - no need

We check again on the correctness, we save and reboot the device. Again, we turn on the data transfer and use.

To connect via Wi-Fi, you only need to turn on the module and wait until the area is scanned, and connects to the selected point.

Connect Wi-Fi

Firmware device

Before installing new firmware It should be soberly understood that everything that will be done at this point is made on your fear and risk, for all consequences, the site administration and the author does not bear any responsibility. So we recommend without the necessary importance and without any knowledge do not try to flash tablet PC - Better working gadget than a broken and invalid warranty card.

First, download the program for the firmware LiveSuit: http://4pda.ru/pages/go/?u\u003dhttp%3A%2F%2FTEXET.RU%2FFILES%2FlivesuitPack105_english_1352960642.exe

Download required drivers on the tablet itself:

http://narod.ru/disk/64815553001.02962bc6c616a8c0bb9ac1c49bdc2d38/usbdrivers.rar.html.

After installing the program on the PC, the folder will automatically be created - the USBDRIVER will automatically be created, it is in this folder that the specified drivers are placed. Now you need to download the firmware itself for it go to the manufacturer's website:

http://www.texet.ru/support/files/ or download it from informal sites, like: 4pda.ru.

Instruction:

• Run a PC program;
• Turn off the tablet PC and clamp the volume button +;
• Connect the device to the PC without pressing the volume key;
• We immediately press 3 times on the power key, while you do not release a finger from the volume;
• Now the computer will return a request to install the appropriate driver - select the installation to manual and go to the previously created driver folder;
• After successful completion, we turn off the device;
• Now again we do 2-3 points and select the firmware in the program (graphic cube);

Program for firmware

• In the window that appears, click "Yes";

Installation of firmware

• Once again, prescribe and wait for the end of the software update process;

Installation completed successfully

At this, the installation was successfully completed, disconnect the tablet PC and turn on - the process will load a little longer, this is normal.

Getting root rights is not required, since already when buying the device is routing.

Some problems and issues:

• What is the difference in TeXet TM 7016 and 7026

The first one is intended for the Ukrainian consumer, the second for Russian

• The tablet is very hot

This is normal, it works - but it is not worth loading it strongly (immediately several dozen processes), he did in China, and this says that the material and equipment is not very high quality.

• External modem does not work

Check its performance on another device, check if the cord is damaged, as well as check its compatibility with the tablet is very important.

• No firmware is installed

Try to clamp when connecting to the PC, the inclusion key and the RESET button (in the depth of the microphone) before the computer is defined by the device.

Full review: