Connecting additional speakers to your TV. How to connect speakers to a TV, depending on their type. Connecting active speaker systems

Modern TVs, despite their high functionality and the presence of HD technologies, are most often equipped with rather primitive speakers that do not allow for high-quality sound. For watching TV at home, especially in a small room, this sound will be enough.

But if you want to fully enjoy watching an interesting movie or listen to music with all the sound nuances, then you should think about increasing the sound quality in accordance with the video image. This can be achieved by connecting additional speakers to the TV.

Before you understand the connection methods and types acoustic systems, let's focus on where we will connect additional equipment. Various TVs have different types TV and audio connectors through which you can connect speakers:

• special connectors
• line output
• headphone jack
• digital output

For TVs with special connectors To connect speakers, speaker systems without a built-in amplifier are suitable. It is very important to choose speakers of appropriate power so as not to exceed the limit allowed for this TV model.

It happens that the TV is not equipped with a special connector. In this case, you need to connect speakers with a built-in amplifier to linear output TV receiver.

Also, if there are no special connectors for connecting external speakers, headphone jack, where to connect the active speaker system (with amplifier).

Digital output New models of modern televisions have audio signals. In this case, you should connect speakers equipped with the appropriate output. Such acoustic systems are an order of magnitude more expensive than conventional ones, but the quality of the sound will pleasantly surprise you.

Continuing the topic, let's look at the types of speaker systems and how to connect them, depending on the quality of the sound.

• Connecting external speakers, for example, speakers from a computer. This option for connecting the speaker system will provide you with high-quality sound if the speakers are equipped with an amplifier. This is evidenced by the possibility of connecting them to a 220V voltage network and the presence of a volume control directly on the speaker. The speakers connect directly to the TV via a 3.5mm TRS jack near the headphone icon

• Connecting through a tape recorder or stereo system will provide you with a higher quality sound signal compared to the sound from TV speakers or external speakers. We connect the music center to the TV using TRS and RCA adapters. In everyday life they are called “tulips” and “bells”. They can be purchased at a specialty store. We connect the adapters through the corresponding outputs (aut) on your TV and inputs (in) on the receiving device, and we get excellent quality sound.

• Connecting a composite stereo system involves connecting several passive speakers of different power and an external amplifier. Such an acoustic system allows you to significantly expand your sound capabilities, thanks to the coordinated work of the receiver and amplifier. This system connected using one of the above methods, or via a SCART connector, if your TV has one. In this case, SCART-RCA or SCART-TRS adapters are used. In case of connection active speakers(with built-in amplifier), you need to use special cables.

• Connecting a home theater will provide you with best quality sound. A home theater can confidently be called a perfect stereo system. After all, it is equipped with a professional receiver and amplifier that make the sound spacious and clear. Thanks to the presence of the receiver, you can additionally connect a Blu-Ray player and DVD. You can connect your home theater system to your TV using a cable through various connectors, the best of which is considered to be the HDMI connector. This connector will ensure seamless transmission of audio and video material of the highest quality. Naturally, such a stereo system is quite expensive, but the price is fully justified by the unsurpassed sound quality combined with an excellent picture.

By connecting additional acoustic devices, do not forget to carefully study the instructions for them and strictly follow all recommendations. All manipulations must be performed with the equipment de-energized.

Very often the speakers that are built into the TV are not enough for viewing. Is there a solution to such a problem? Undoubtedly. You can achieve the required volume with the help of good devices, which must be chosen wisely and connected. How to connect speakers from a home theater to a TV? — We’ll deal with this in this article.

Columns

First you need to understand the structure of the connected device itself. There are two types of acoustics:

• Active type. Such speakers work with an amplifier, which has a positive effect on sound quality.
• Passive. Such devices do not have an amplifier.

You can connect any type of device to your TV. Let's talk about each of them in more detail.

Active type devices

How to connect speakers from a home theater to a TV? The design of the TV does not allow installing decent speakers inside. But nothing prevents you from connecting any external device that is capable of outputting sound. You can use any kind of equipment, be it laptop gadgets, personal computer or home theater.

Any modern TV has a special socket that allows you to connect the TV to audio output devices. A powerful amplifier built into active speakers only simplifies the connection task. Such devices are powered using the most common network - no additional manipulations are required.

External speakers easily connect directly to your TV—you don't have to purchase additional kits connecting wires or adapters.

Each socket, which is located on the back of the TV, has its own designation. Labeling helps determine the purpose of each of them.

In order to connect gadgets, you must follow the following instructions:

1. Look for sound jacks that have red (pink) and White color. The markings of such inputs are called Audio-R (white) and Audio-L (red).
2. Connect all devices and start using them.

Important! You are the happy owner of a Samsung TV, but at the same time, due to the lack software, you are unable to watch online television? The solution to this problem is to install a flash player. Click on the direct link and you will learn about.

Passive speaker type

Such devices operate without the use of built-in powerful amplifier. How to connect speakers from a computer to a TV using a cable? First, you need to connect the speakers to a pre-selected amplifier, and then connect it directly to the TV.

Connecting elements are included with the equipment, but if you do not have them in stock, then no one is stopping you from purchasing them:

• It is necessary to check the output impedance values ​​of the amplifying element. It must have nominal values, which will correspond to the resistance (R) of the speakers.
• Also, do not forget about polarity. The left channel needs to be connected to the left speaker, and the right channel to the right. If you make a mistake, the sound quality will be unsatisfactory.

Important! Remember that the amplifier power values ​​must be at least thirty percent of the same parameter of the sound output devices used. The wire must satisfy the following condition: the cross-sectional area (S) must be at least one square centimeter. The thickness of the cable ensures a reliable connection.

Mini-jack

Some equipment has the usual “tulip” or “mini-jack” connector. To connect a stereo system, a special AV-class receiver is used, which requires an additional cable. This connection method is the most common among users.

How to connect speakers from a home theater to a TV? There is another method, which will be discussed below.

HDMI cable

Modern TVs have an HDMI connector. Connecting with such a cable will help to get very high quality sound, but not all audio systems have a corresponding input for such a cable. But this issue also has a solution - hardware stores sell special adapters that you can use for this method.

Using a tape recorder or tape recorder

You can achieve decent sound using music center or other music playback devices. In order to use this method, you must connect the TV and music device with a special cable, and connect the device itself to the speakers.

For this method you need to use a “tulip” or TRS. If you have problems connecting, we recommend using an adapter.

Important! Remember that the signal is output from the TV. That is why you need to connect it to the connector that is responsible for the output. Such connectors are marked OUT.

Depending on the speaker model, the connectors may be different. To find out which one you need, check the back panel of the device - usually all interfaces are located there.

How to connect special speakers

If you want to connect speakers designed specifically for use with TV to your TV, you will need a cable with an RCA connector - also known as a “tulip”, AV connector or cinch plug.

Cable for connecting speakers to TV

To connect the speakers to, you must use a cable with a red and white connection. This is a special color marking: white and red “tulips” are used to connect analog audio (white for a mono signal or the left channel of a stereo signal, and red for the right channel).

How to connect “non-native” speakers to your TV

In fact, you can connect any speakers to your TV. For example, the ones you use with your computer. Moreover, connecting such speakers in most cases is easier than connecting “native” ones.

Speakers with headphone jack

Simply plug the speaker audio cable into the headphone output located on the . Many modern TV devices support this interface.

However, keep in mind that once you connect speakers to the headphone jack, you will most likely not be able to control the volume on your TV. Then you will have to adjust the volume on the speakers themselves.

Equipment manufacturers often miss important point– a weak speaker system for a TV, even in fairly expensive devices. As a result, when viewing a picture with the sound turned on loudly or at high tones, rattling and other unpleasant sound signals. This is why many people use standalone speakers for TV.

To connect speakers to a TV, you need to consider the main types of acoustics and how to connect them.

Kinds	Description
Simple columns	They will provide excellent sound on the TV only if there is an amplifier, and they must be connected separately to the network, and to equipment via a 3.5 mm TRS connector.
Multimedia center	Using this option provides the user with better sound quality. Here you need a bell or TRS type adapter; to connect the equipment you need to use the AUT output on the TV, and the IN input on the center.
Composite stereo system	It is a regular receiver with a connected set of passive acoustic amplifiers. The connection can be made in any of the listed methods or through a special SCART connector using the appropriate adapters. When using active type devices, the sound output will be direct, but a special cable will be needed.
Home cinema	This option is advanced and most promising, since by connecting a stereo system you can get colossal and surround sound at using Smart TV – the sound is multifaceted and without distortion.

How to choose the right speakers

Connection option	Description
Active speakers	The presence of a built-in amplifier and the provision of power from a 220 V network. Usually 4 speakers and a subwoofer are used.
Passive	The disadvantage is the lack of a built-in amplifier.
Wireless	Used to connect to a home theater, they completely lack wires for connecting to the network, but the front ones have wires for connecting to a TV.
Wall mounted	They provide the opportunity to save space, as they can be hung on the wall at a height of 1.5 meters above the listener’s head.
Smart	They provide sound transmission for a certain time, can have an unusual shape and many necessary switches, and are suitable for connecting to laptops, smartphones, and tablets.

Power

This parameter is indicated by the manufacturer in the specifications, and the number of frequencies varies from nominal to maximum power.
The nominal value is declared by the manufacturer, the maximum is the one that the speakers can achieve without breaking.

In order for the sound to be of high quality, it is necessary to focus on the room parameters when choosing power, for example, for 20 sq. meters, a power of 100 W is sufficient.

Up to 7 speakers are used in a home theater. It should be taken into account that modern cinemas are produced with a total power of up to 500 W.

Design

The speakers are available with wooden and plastic casings, the latter being cheaper, but plastic may cause rattling. In addition, the housing can be closed or open; closed is the cheapest, but it also affects the quality of sounds due to the closed labyrinths of passages.

If necessary, transfer low frequencies you need to use the floor option.

How to connect speakers to a TV

There are several connection methods, but before using any of them, you need to determine the types of connectors available and know how to connect speakers without them via WiFi.

At the same time, if there is no necessary connector for an amplifier, you need to choose the option that connects without an amplifier. They are connected via a special Scart or RCA connector, while digital port HDMI is used for modern advanced systems.

How to connect speakers to a Samsung TV

There are two methods for connecting speakers for a Samsung TV (as well as for Philips):

1. From a computer using a 3.5 mm connector, it is important to study their characteristics - they need to have an amplifier included, without it there is no point in connecting them to a Samsung TV. After connecting to Samsung, you can adjust the sound directly on the speaker.
2. From the music center, you need to select a TV adapter cable TRS-RCA (its 3.5 mm connector) or RCA-RCA (tulip), any of them will do. Next, plug it into the corresponding sockets on the speaker and Samsung. At the same time, the sound will be enhanced significantly, because the center is designed for the highest quality sound transmission.

To LG TV

To connect to LG, you can also use several options:

• the highest quality is an HDMI connection, which will provide high-quality sound, but for this you need to use modern equipment, such as a home theater or an expensive receiver. If the speakers used meet the stated requirements, then the sound quality and cinema hall effect are guaranteed;
• via Bluetooth - is a wireless connecting tool, and the speakers must also have this function. Connecting the speakers to the TV is done by using a special program;
• in addition to provide more high-quality sound you can connect a receiver;
• With the wireless option, you can connect all the cinema equipment except the front speakers, which are connected to the TV with a special cord.

How to connect home theater speakers to your TV

Connecting a home theater can be done in several ways:

• tulip connectors or Scart connectors, for which you need to purchase the appropriate cords;
• via HDMI.

If you decide on choosing active and passive speakers, you should consider:

• a tulip-type connector is used to connect a radio or music center;
• Scart connector for small external audio system.

When connecting active speakers, you only need to use the appropriate socket. They connect without problems, without additional devices, the main thing is to use the appropriate sockets according to the markings.
In the case of the passive option, you must first connect to the amplifier and then to the TV. All connecting elements must be included.

How to connect a subwoofer to a TV

Connecting a subwoofer occurs in almost the same way as a home theater, since here it is also important to take into account the active and passive options.

To connect an active one, you just need to use the tulip connectors, and then adjust the sound in the speakers using the remote control.

In the case of the passive option, it is necessary to use an additional home theater or a high-quality receiver, but much more work will have to be done, and the sound quality will be lower.

How to connect an amplifier to a TV

To connect an external amplifier to increase the sound effect, you need to use one of the described options. Through a tulip connector or Scart connector, a similar RCA or TRS adapter is purchased for this purpose.

How to connect computer speakers to a TV

If you connect computer speakers, then you just need to plug the cable into the corresponding connector. Can be used " Jack 3.5 ". If there are two cables, then you need to comply with the color palette " Audio 1" And "Audio 2 ».
To connect a Bluetooth speaker wirelessly from a computer, you need to use the “use bluetooth” function on the TV, and the amplifier must have the appropriate ability to connect.

Conclusion

Televisions, especially new panels, often have weak acoustics, since it is not possible to build powerful software inside the equipment. Therefore, they are equipped with various connectors and programs that provide the ability to connect external sound amplifiers.

For a long time I did not want to sit down to write this article, and not even because I was lazy, but simply the topic of connecting Bluetooth headphones to TVs with Smart TV is very “dark”. It all started when I bought myself Bluetooth headphones and connected them to my Philips TV, which runs Android TV. Everything connected very simply and without problems. I thought why not write detailed instructions for connecting wireless headphones to TVs. Moreover, many modern televisions have Bluetooth support.

But somehow I didn’t really want to write only about Philips TVs, so I decided to make general instructions and show how you can connect Bluetooth headphones to LG, Samsung and Sony TVs. There as I don’t have these TVs, and check everything on personal experience I can’t, so I started looking for information on the Internet. And then it began. If Philips and Sony TVs that run on Android TV connect without problems to wireless headphones, then LG with webOS and Samsung Smart TV are a complete mess.

It is clear that the TV must have a built-in bluetooth adapter. But you probably know that almost all TVs work only with original devices (cameras, adapters, remotes, etc.). It's about the same story with headphones. You can easily connect original Bluetooth to LG and Samsung TVs stereo headset. But it’s unlikely that you’ll be able to connect regular headphones. But it depends on the TV model, series, firmware version, year of production and God knows what else. The mess is such that after studying this topic for several hours, my brain boiled.

It seems to be in new TV models Samsung already You can connect any Bluetooth headphones. There is also a service menu where you can try to enable support for this function. But again, it all depends on the series and model. LG has about the same story. And if you believe LG support, then you can only connect original headphones. But again, not on all models.

To avoid confusion, I will divide this article into three sections. I’ll tell you about each manufacturer separately. I'll show you how you can try connecting Bluetooth headphones in the TV settings.

In order not to waste time, I advise you to immediately make sure that your TV has built-in Bluetooth (if you have a Smart TV, then most likely yes). In some models it must be connected with a separate proprietary adapter. You can see the characteristics of your model on the official website.

If your TV does not have Bluetooth, or it flatly refuses to see headphones, then you can use a special Bluetooth adapter (transmitter), which connects to the 3.5 mm output of the TV, and headphones are already connected to it. I will tell you more about such adapters at the end of the article.

Bluetooth headphones + Philips and Sony TVs on Android TV

Since I have Philips TV (Philips model 43PUS7150/12 on Android TV), and I successfully paired it with my JBL E45BT headphones, then first of all I’ll tell you about this platform.

Important! I have no way to check the connection on Sony TV. But, since Sony also uses Android TV as a Smart TV platform, I think that everything will work. I hope they didn’t put restrictions on connecting Bluetooth devices.

Go to Android menu TV and at the very bottom select "Wired and Wireless Networks".

The TV will display a message that you need to turn on the device and place it at a distance of up to 5 meters. Turn on your headphones and press the "Search" button. The headphones must be in connection mode. The blue Bluetooth light should flash. If it does not blink, then most likely you need to press and hold the power button, or a separate button with the corresponding icon.

The TV needs to see our headphones. Select them and click "Connect".

The sound from the TV started playing through the headphones. You can manage them in the TV settings. "Remove device" item. There you can disable or remove the wireless headset.

After turning on the power to my headphones, the sound from the TV speakers immediately goes to them. When I turn off the headphones, the built-in speakers sound.

We've sorted out these TVs. If you have anything to add, or have any questions, write in the comments.

Connecting Bluetooth headphones to a Samsung TV

Let's move on to Samsung TVs, which have complete confusion on this topic. As I already wrote at the beginning of the article, it seems that new models of certain series support connection bluetooth headphones any manufacturers. At least I saw a video where to the TV J series connected Beats headphones without any problems.

I don’t know what Samsung TV you have, what firmware it has, Smart TV version, etc., but I advise you to try it. What if everything works out and works.

Connect: Open your TV settings. Go to the "Sound" - "Speaker Settings" section. Turn on your Bluetooth headphones and place them next to the TV. They must be in connected mode. The blue indicator should flash. Select "Bluetooth Headphone List".

If you do not have the “List of Bluetooth headphones” item, or it is inactive, then you can try activating it in the TV service menu. More on this below in the article.

Menu appearance may vary slightly.

Select them and the devices will be paired. The sound from the Samsung TV will be transmitted via Bluetooth to the headphones. If you turn them off, the sound will come through the TV speakers.

For K series TVs

In the settings you need to open the “Sound” section, then “Select speaker” and “Bluetooth Audio”.

Activating the "List of Bluetooth headphones" section in the service menu

I will not describe the whole process, but will simply add a video in which the author explains and shows everything in detail. There you can see the entire connection process.

If you succeeded using service menu enable Bluetooth headphone support on Samsung TV, then write about it in the comments to this article, and don’t forget to say thank you to the author of this video.

Let me remind you that a lot depends on the series and model of your TV. If it doesn’t work, then you can describe your case in the comments, or use the solution that I will talk about at the end of this article.

How to connect Bluetooth headphones to LG TV

It's a pity that I don't have an LG TV on webOS to check everything myself. There is not much information on this topic on the Internet. But as far as I understand, LG’s connection to Bluetooth devices is even more complicated. Can only be connected original devices. That is, original LG headphones, soundbar, etc. This can be done in the settings, in the “Sound” section – “LG sound sync (wireless)”.

And even if your TV model has built-in Bluetooth, it is used primarily to connect the remote control and other branded devices.

You can also try connecting your headset using this scheme:

These are instructions from the official website. But as far as I understand, only branded headsets are connected this way.

Connecting Bluetooth devices via the LG TV Plus app

For Android and iOS there is an application called LG TV Plus. It is designed to control LG TVs that run webOS.

It seems like this application has something to do with it, right? But I found a video that shows how to LG TV Plus you can connect almost any Bluetooth device to your LG TV. Including headphones and speaker. I just can’t say for sure which version of webOS has this option. It looks like webOS 3.0.

How it works: install LG TV Plus on a smartphone or tablet. Go to the application and connect to your TV. In the application settings there is a section "Bluetooth Agent". Through this agent you can connect wireless headphones to LG TV.

Here's a video (about the function "Bluetooth Agent" from 3:48) :

If there is no TV Bluetooth, or headphones do not connect: solution

There are devices such as Bluetooth transmitters. They can be used not only with TVs, but also with other devices. Their task is to take sound from the TV via cable (from the 3.5 mm output) and transmit it via Bluetooth to any wireless headphones.

They look something like this:

This is a universal solution for almost any TV, even an old one. It is enough to connect the cable from the transmitter to the headphone output of the TV and connect your headset to the transmitter. These adapters are usually powered by a built-in battery. USB cable included for power supply/charging. If your TV has a USB port, you can connect the adapter to it.

There are a lot of such transmitters on the market. There are many Chinese, cheap devices.

conclusions

As it turned out, only TVs working on Android system TV allows you to connect without problems Bluetooth headsets and outputs sound to them. For such popular manufacturers as LG and Samsung, everything is very ambiguous in this regard. There are certain series and models that have the Bluetooth headphone connection function. And LG still can't give users the ability to choose the Bluetooth devices they want to connect to their TVs. And don’t limit them only to branded accessories.

In any case, you can always buy an inexpensive transmitter and output sound wirelessly using it. Yes, this is additional expense and inconvenience in the form of another device, but if there is no other way, then the solution is not bad.

Write in the comments. Share useful information and ask questions. I will be happy to answer everyone!