Dummy form does not allow you to turn off your computer. The computer does not turn off - how to turn it off? Computer shutdown software problems

One of the most common problems when using a computer running Windows OS is that even after shutting down the computer continues to work. The only option to turn off the computer in this case is to force it to shut down by holding the power button for a long time. But this cannot be used on an ongoing basis, which means it is necessary to look for a solution to the problem.

With the problem of not being able to turn off the computer in a standard way, it turns out, collides a large number of users, but there can be many reasons for this problem: installed drivers, software, blocking computer shutdown, incorrect power settings, etc.

Ways to solve the problem

Method 1: Setting up the USB hub

This method can help laptop users; desktop computer users can skip it. The fact is that the system can block the operation of some USB devices to save battery power, but sometimes laptops may not work correctly with this function, which makes it impossible to turn off the computer.

In this case, you will need to call up the menu "Control Panel" , set viewing mode for convenience "Small Icons" , and then navigate to the section "System" .

In the left area of ​​the window that pops up, go to the section "Device Manager" .

The window we need will appear on the screen, in which you will need to expand the item « USB controllers» , click right click mouse by "USB Root Hub" and in the displayed context menu choose "Properties" .

In the new window, go to the tab "Power Management" and remove the bird from the point "Allow this device to turn off to save power" . Save your changes. Perform similar actions for all “USB Root Hub” items.

After completing these steps, try turning off the computer through the Start menu.

Method 2: System Restore

If the problem with shutting down the computer appeared suddenly and recently, for example, after installing some program or drivers for a connected device, then the system restore function will help solve the problem, which will allow you to roll back the computer to the moment when there were no problems with shutdown.

To do this, go to the menu "Control Panel" , and then go to the section "Recovery" .

In the new window, select "Run System Restore" .

After a few moments, a window will appear on the screen showing the available restore points. Select the rollback point that dates back to the period when the computer, in your opinion, was working normally. Start the recovery procedure.

Please note that the system recovery procedure may take quite a long time - it will all depend on how many changes have been made to the system. operating system has been entered since the date of the rollback point you selected.

Method 3: Disable incorrect services and applications

Most often, the cause of problems with turning off the computer is an incorrectly working service, which, as a result of a failure, cannot complete its work, which means the computer cannot turn off.

First of all, you need to look Windows log for errors. To do this, open the menu "Control Panel" and go to the section "Administration" .

In the window that appears, open the shortcut twice "Event View" .

In the left area of ​​the window that opens, expand the item "Windows Logs". In it you will need to open two magazines: "Application" and "System" .

Check out these two magazines. You are interested in events marked with "Error" . If the same service or application is flagged in these events each time, then it or it must be disabled.

To disable a malfunctioning service, return to the window "Administration" and then open the shortcut "Services" .

In the list that opens, find the service you need, and then open it by double-clicking on it. In the tab "Are common" near the column "Startup type" set value "Disabled" , and then save the changes.

If a problem is found in the operation of the application, then it is recommended to remove such incorrectly working application from the computer through the menu “Control Panel” – “Uninstall Programs” . If you cannot remove an application from your computer, you can remove it from startup. To do this, open it "Task Manager" keyboard shortcut Ctrl+Shift+Del . In the window that opens, go to the tab. Right-click on the application and select "Delete" . Save your changes.

Method 4: Reducing the duration of closing programs

In this method, you can try to reduce the closing time of programs by making changes to Windows registry. To do this, open a window "Run" key combination Win+R , in the window that appears you need to run the command regedit .

Having launched the Windows registry, you will need to make changes to the operation of three parameters that are located in the branch HKEY_CURRENT_USERControl PanelDesktop:

1. AutoEndTasks. For this parameter, you will need to set the value to 1. Enabling this parameter will mean that Windows will forcefully terminate hung programs when the computer shuts down;

2. HungAppTimeout. This parameter should be set to a value from 1000 to 5000. In this case, you specify a specific time after which Windows will force the program to quit if it does not respond;

3. WailToKiliAppTimeoul. It is recommended to set this parameter to a value between 5000 and 7000. This parameter determines how many milliseconds Windows will wait for the program to respond.

If you do not find the required parameter at the specified address, you will need to create it. You can create the “AutoEndTasks” parameter by right-clicking on any free area of ​​the existing parameters and in the context menu that appears, going to the item “Create” – “String parameter” . Set the parameter to the exact name and required value. Save the change.

For the "HungAppTimeout" and "WailToKiliAppTimeoul" options, right-click on an empty area, and then navigate to “New” – “DWORD value (32 bits)” .

By introducing necessary changes, close the Windows registry and try shutting down your computer.

If you're in a hurry and want to quickly shut down your Windows 8.1 or Windows 8 computer, you might be bothered by an annoying warning that says there are programs running on your computer that need to be closed. If you want to disable this warning permanently, continue reading this step by step guide to find out how to do this.

Almost every time we want to shut down or restart a computer running Windows 8 or 8.1, the operating system displays a message that a number of programs require closing, and there may be one, two or even more such programs. This is because unfinished applications may have unsaved data, which is why they prevent Windows from shutting down quietly. However, in most cases, these programs that should be closed do not use any data, so the warning message is of no use and is very annoying for this reason.

So if you are sure that you always save application data before turning off or restarting your computer, then you can safely disable this feature, and to do this, follow the steps described below.

Step 1: First of all, press the Win + R key combination to open the Run dialog.

Step 2: Type the command "regedit" and click "OK" to open the Registry Editor window.

Step 3: In the Registry Editor, follow the following path:

HKEY_CURRENT_USER\Control Panel\Desktop

Step 4: On the right side of the Registry Editor, right-click on an empty space. Select “Create -> String Parameter”. Then name it "AutoEndTasks".

Step 5: Double-click on the newly created parameter and set its value to 1.

Now when you turn off or restart your computer, you will no longer see any prompts or warnings.

Have a great day!

Sooner or later, many users have a question about how to close a program if it does not close. In fact, the topic is not so simple. After all, frozen applications are a huge problem for users. They not only load the operating system and processor, but also interfere with normal operation of the computer. The following will provide the best tips and recommendations for what to do if you cannot close an application.

How to determine if a program is frozen

Before racking their brains for an answer to the question of how to close a program if it won't close, the user must understand whether the application is truly frozen. It is likely that the computer's performance leaves much to be desired, and the "close" command simply takes a long time to process.

Typically, if an application is frozen, it will stop responding to user input, the cursor will turn into either an hourglass or a small circle (depending on the operating system), and the application title will read “Not responding.” At the same time, all attempts to complete work with the program in the usual way (by clicking on the cross in the upper right corner of the screen) do not produce results. Also when you click on work area program the screen is “covered with fog”. All these are signs of freezing. How can I close a program if it won't close? Top tips and recommendations will be presented below.

Expectation

The first advice is to wait a little. Don't forget that a computer has a certain power. When the processor is loaded and random access memory OS speed decreases. And it takes longer to process the transaction.

Accordingly, you will have to wait a little. When the computer takes a long time to respond to actions performed in the program, all signs of freezing are observed. The waiting period should not exceed 5-10 minutes. If after this time there are no responses to user actions, you can proceed to other shutdown methods.

Method 1: Hotkeys

So, it turned out that the program is not responding. How to close a frozen program? If waiting does not produce results, the user must choose one course of action or another. You can press some keys on the keyboard, as well as their combinations.

When the program freezes, you are prompted to click on:

  • Ctrl + W.
  • Alt + F4.

These combinations contribute to the emergency closure of many frozen programs. Not the most effective, but a valid method. But this is just the beginning. There are several more options.

Method 2: through the menu

How can I close a program if it won't close? The following trick works more often than a keyboard shortcut. Users use it in practice with noticeable success. To close a frozen application, you can call up the program action menu, and then select the appropriate function there.

To do this you need:

  1. Place the cursor over the program window on the taskbar.
  2. Right-click on the appropriate application.
  3. In the menu that appears, select "Close window". If the system issues a warning, agree with it.
  4. Wait a while.

As a rule, after the actions taken, the program closes on its own after 10-15 seconds. If this method didn't help, no need to panic. You can try using other methods. Luckily, Windows provides quite a few ways to close applications.

Method 3: Task Manager

Which ones exactly? How can you close a program if it freezes? When the listed methods do not produce results, the user is asked to act somewhat differently. For example, call the task manager, and then end the process launched by a particular program.

This method is the most effective. It allows you to urgently close almost any program. Doesn't work only in some cases. Therefore, users often prefer it.

How to close a program that is frozen or unresponsive? This requires:

  1. Click on the combination Ctrl keys+ Alt + Del. Or Ctrl + Shift + Esc will do.
  2. Select "Task Manager" in the window that appears. If you used a combination with "Shift", you can skip this step. The corresponding service will open immediately.
  3. Go to the "Applications" tab.
  4. Select the frozen program and click on the “End task” or “End task” button.
  5. Accept the operating system warning (if it is issued), and then wait a bit.

As a rule, after 5-15 seconds the program will be closed urgently. In some cases, it is suggested to send a message about the error of the corresponding application. This method can be improved a little. To do this, go to the "Processes" tab in the "Task Manager", then select the name of the process that is being executed by the frozen program, and click on "End". This will close the application approximately 99% of the time.

Method 4: additional programs

In some situations, additional software helps. Some processes are terminated forcibly only with their help. Not the most common, but an effective solution to the problem. How to close a program that has frozen? The user must download and install a special additional application to search for processes running on your computer, and then repeat the same steps as in the Task Manager. Process Explorer is perfect for this idea.

How can I close a program if it won't close? The user will have to:

  1. Download Process Explorer for yourself.
  2. Run the program. The application does not require installation, which makes users very happy.
  3. Find the desired program/process in the list on the left side of the screen.
  4. Select it by right-clicking on the corresponding line.
  5. In the menu that appears, perform the “Kill” operation.

After this, the application will be closed on an emergency basis. The advantage of using the program is that it displays processes and programs hidden from the standard Task Manager.

Method 5: radical approach

How can you close a program if it freezes? The next method is radical. There is no need to rush with it, even though it is considered the simplest. The thing is that to successfully complete programs, you need... a reboot of the operating system.

Skype won't close? How to close it? Exactly the same as all other applications. First, try all the methods listed earlier. If they do not help, then the user has no choice but to restart the computer.

It is not recommended to use Start. After all, frozen programs sometimes interfere with the corresponding operation. Instead, you need to find the Reset button on your computer and click on it. This is an emergency reboot. This option works on desktop computers. It is recommended to save all data in other applications before using it. In addition, it is worth considering that constantly restarting the computer does not have the best effect on the performance of the device.

Method 6: for laptops

Now it’s clear how to close a program that has frozen. The user could easily familiarize himself with examples of actions in a particular case. Detailed instructions will help solve the problem.

What to do if all the previously listed methods do not help, and the person is working not at a desktop computer, but at a laptop? Or if for a number of reasons the operating system refuses to reboot even after pressing Reset?

In this case, you need to urgently shut down the operating system. But before that, save all the data on your computer. Next, press the power button on the laptop (or computer) and hold it for about 5-10 seconds. The operating system will shut down. Then you can turn on the computer and continue working with it.

The disadvantage of this method of action is its danger to the device. Frequent emergency shutdowns lead to operating system failures and hardware malfunctions. This step will not solve the problem with programs freezing. Therefore, you can use it only as a last resort.

The reader should already understand how to force close a program on Windows. All of the above methods help to bring your idea to life without much difficulty. What tips will help you avoid app freezing next time?

The most common recommendations among them are:

  1. Make sure that it is the program that has frozen, and not the computer. The list of actions in one case or another will be different. Most often, when your computer freezes, an emergency reboot or shutdown helps.
  2. Scan your computer for viruses. Treat it if necessary.
  3. Reinstall a frozen program. Sometimes this method helps very effectively.
  4. Do not open many programs and applications when working with problematic software. The less the processor is loaded, the faster certain operations will be performed on it.
  5. Learn to wait. As already mentioned, sometimes processes simply take a long time to process. And so it begins to seem that computer program stuck.
  6. Try all the listed methods. It is recommended to postpone rebooting and shutting down the computer as a last resort.

That's all. In fact, there is nothing difficult about ending a stuck program. All of these methods are successfully used by PC users to varying degrees.

I am sure that if you have been using your computer for quite a long time, then you have encountered such a problem as its reluctance to turn on. It is much less common to encounter a problem when the PC, after being turned off, does not want to go out and continues to work. After you press the on/off button, programs will begin shutting down, but the computer will not turn off. There are other behaviors with the same problem. For example, when the screen has long gone dark, but the coolers continue to work or the power button and indicators are off. Naturally, it becomes clear that the computer continues to operate even when the screen is off.

Today we will find out what are the reasons for this behavior of your computer, find out how to solve this problem and what you need to do to avoid such a problem.

The main reasons why your computer freezes when you turn it off

There are many reasons that can affect the occurrence of this problem. The main one is a conflict of programs or too many running programs, games or applications. If, before shutting down, you have a large number of programs running, then they will complete their work one by one, while maintaining the original data at the time of shutdown. In this case, the PC may take a very long time to turn off. But if the application is actively working with the system, and at that moment you turn off the computer, then a conflict will occur and the system will not be able to shut down this application, accordingly, the computer will continue to work, but the screen should not go dark, and you will see a message stating that the computer cannot shut down programs or some files may need to be saved. Therefore, before turning off the PC, I recommend closing all programs in use and files that were open.

Failures of this kind may also be caused by viruses that your security programs could not cope with and allowed onto your computer. Some viruses are designed to infect system file and block the system. There is a possibility that the process that terminates when the computer is turned off is infected. Therefore, the computer continues to work after pressing the off button.I described a working method for removing all viruses from a PC, and I also have a video on this topic:

Maximum cleaning of your computer from viruses


If you've recently updated your operating system or updated drivers for any of your devices, your computer may behave this way - it won't turn off when it needs to. The fact is that after updating the system, conflicts sometimes arise between old and new drivers. Such a conflict will certainly lead to computer failures and system freezes. If you installed a driver, even an old one, but it became crooked, some devices on the computer will not work correctly. With this problem, the PC may also not turn off the first time. I recommend installing drivers only from the equipment manufacturer’s website, as I showed how to do this in my video:

Correct installation of drivers


When the computer overheats, and some of its elements have been heating above the maximum temperature for a long time, these elements will begin to work incorrectly. This may cause problems when turning off.I showed how to clean your computer from dust and eliminate overheating in this video:

Cleaning from dust

Correct replacement of thermal paste


PC froze - how to turn it off?

If, when you turn off your PC, it freezes and does not want to shut down, you need to help it do this. There are several ways to do this. The first method is the simplest, but it is also the most radical. We simply hold down the power button and hold it until the computer completely goes out. For laptops this may not help, then disconnect the power supply cord and remove the battery. But, still, I do not recommend using this method and leaving it as a last resort. If you do this, you risk damaging HDD, if you have an SSD, don't worry. Also, this method of turning off the computer may result in the loss of unsaved data.

In order to carry out a softer and more correct shutdown of the computer, if it does not hang, you need to open the device manager and find the item “USB Controllers” in the menu on the left, where for each device named “Root” USB hub» In the properties on the “Power Management” tab, check the box next to the “Allow the computer to turn off this device to save energy” option. You can do the same with other devices in the device manager.



If your computer starts to crash when you turn it off after updating the system, driver, or installing any program, then it’s time to use something called the “tool.” Windows recovery" To do this, you need to do the following: Open “Start”, enter “System Restore” in the search field. After the utility is found, run it. Recovery Wizard previous state will prompt you to select a restore point. You need to choose one in which the laptop works properly and stably. After this, the recovery wizard will start its work and your problem should be resolved. You can find out more about system recovery. There is also great video about this theme:

Windows Recovery


The computer does not turn off due to a malfunction

The PC may not turn off if one or more computer nodes are working incorrectly or malfunctioning. Most often this happens due to a faulty power supply or motherboard. It will be difficult for you to diagnose your PC hardware and identify the faulty part; it is better to send your computer to a service center for diagnostics. But if you still want to check the equipment yourself, you can do it like this:

Self-diagnosis of PC

PC won't turn off due to BIOS settings

Not all power plans that can be configured in the BIOS are equally useful. Sometimes when incorrect setting If these BIOS parameters are used, the computer may not turn off or enter sleep mode, and hibernation may not work. In different BIOSes, power supply settings are performed differently and I cannot give a clear algorithm of actions for all types of BIOSes, but I have a good one, where you can find the information you need.

We optimize free space and processes

After you solve the problem with your laptop turning off, you will need to clean your computer. It will be about liberation disk space system disk from temporary and unnecessary files. To do this, you will need to remove applications that you do not use. Do it like this:

Maximum Disk Cleanup


It is also worth optimizing Windows startup by excluding from it service utilities and applications that are not regularly used.In order to clear space and startups, I recommend using the program. In addition, you can speed up Windows:

Speeding up Windows


Only after you have completed all of the above procedures will the computer stop crashing and turn off normally.

It must be remembered that taking care of your PC is an integral part of its use. Many people wonder why computers begin to work unstable after six months or a year. It's all about care and proper use. All the best to you and a fast computer.

Many users wonder Why doesn't the computer turn off after finishing? Windows operation 7, 8 . There are a lot of reasons, in this article we will try to help you by looking at the most common problems and ways to solve them. Common problems include:

  1. The computer does not turn off through start when you press the “shutdown” button (continues to function)
  2. There is a long shutdown
  3. The PC cannot shut down at all (the “shutdown” screen appears all the time)

User reactions in such situations may vary. Someone de-energizes the PC, and someone turns it off every time with the power button, holding it down for 5-10 seconds. These shutdown methods have a detrimental effect on the performance of your machine, and it’s not for nothing that special buttons were invented for these actions.

Let us conditionally divide the presented material into two parts. In the first, we will consider possible software problems, in the second, hardware ones. Before going through the steps below, try performing a system restore to a date before problems were noticed.

Important! Be sure to read the material. Here we consider additional methods that are no less effective, also for a stationary PC.

Computer shutdown software problems

The most common errors that prevent the computer from shutting down are incorrect operation of programs, service failures, and virus software. To try to identify the error, you can look at the stability log. To view it, expand “maintenance” in the main window, then click the stability log link.

In the stability monitor window, you can select a date and view the report below. If you click on the error, you will receive a detailed description of it.

This way, you can identify why the computer does not turn off after shutting down or takes a long time to turn off. Follow the steps below (not necessarily in this order), the following actions will help you.

1. Based on viewing the log, uninstall the program, remove it from Windows startup, or disable the service with which errors occurred. Then reboot the system, try to turn off the computer.

If nothing has changed, use a “clean boot”, that is, launching the elements necessary only for Windows works. In type msconfig and press enter. On the “general” tab, select “selective launch”, check the options as in the screenshot.

Visit the “services” tab, check the item at the bottom that does not display Windows services. Next, click “disable everything”, OK, “reboot”.

This diagnostic tool will definitely help you identify why your computer won’t turn off in Windows 7, 8, and what programs and services contribute to this. Run the necessary elements and get rid of the suspicious ones.

2. Scan your entire PC for malware; viruses can negatively affect the stable operation of the system. Before scanning, make sure you have the latest virus database update.

3. Install Windows updates. Microsoft releases updates to resolve software and driver problems. To download update packages, go to the center Windows updates. When you try to turn off your computer, you will see the status of the installation process of downloaded packages, which can take quite a lot of time. Try downloading the package.

Computer shutdown hardware problems

If you have tried all the methods, and the computer does not turn off after Windows 7, 8 shuts down, then it is likely that the problem lies in the hardware. These include hardware, driver and Bios errors.

1. Remember, maybe the PC stopped turning off through startup when you installed new equipment, but there may be problems with equipment (device) that was already installed a long time ago. In this case, disconnect the device (if possible), check whether the installed drivers or disable the hardware in Device Manager.

In the search, type “device manager” and press enter. In the window you will see a hierarchical list of all the equipment that is installed on the computer. Go through the list looking for a yellow triangle with an exclamation mark (common) or another icon indicating a problem with the device.

Double-click on an element with an icon to go to its properties. On the General tab, in the Device Status area, the error is described. Depending on the error status, update, rollback, install the driver in Windows 7, 8 (visit the “driver” tab) or disable the device.

Right-click on the device and select “disable” from the menu. Next, click “yes”, then the device’s icon will change and it will no longer work until you turn it on.

To effectively identify why the computer does not turn off after shutting down Windows 7, 8, you can use the boot log, which lists the drivers and their status. Bring up the More Boot Options menu () by pressing F8 before starting Windows. Next, select “boot logging” and press enter.

After Windows downloads, go to the Windows directory, use or search and find the ntbtlog.txt file, open it. Now look for any driver issues. The did not load driver status means that the driver did not work. Next, go to device manager and follow the steps described above.

2. If you have used all the methods and the computer continues to not turn off, then try the one responsible for turning the PC on and off. If after resetting the BIOS settings there are no changes, then go to the website of the motherboard company, download Latest updates and update Bios to the latest version.

That's all, all the ways to help correct shutting down the computer and on time. I strongly recommend that you follow the link about turning off the laptop in order to increase the chances of eradicating the problem.


Top