Ping jumps in world of tanks wifi. How to reduce high ping to server or game. What is ping and how to check it

Question: Ping jumps to the router when WiFi is on

I bought a fresh Tenda N301 to replace the ASUS RT-N10 C1. ASUS recently showed freezes in games for 1-2 minutes (ping jumped to ~ 1200 and large packet loss ~ 80%). I thought that I would live right now, but no. Tenda turned out to be quirky too. Ping jumps even higher (~ 2660), packet loss jumps (almost always all packets are lost) and every 2 minutes or 2 minutes and 15 seconds. Several wireless clients are connected to the router (iphone 4, ipad air, tablet sumsung tab e, tablet prestigio, xperia z1) and my stationary computer via the lan-port. I started rummaging through the settings of the router. To no use. I use PPPoE connection(I indicate static IP) to VPN server, dns 8.8.8.8 and 8.8.4.4. Pinged to Google servers and various games, ping jumps at the same intervals. Then I thought of making a ping to the router, it turned out to be a ping and it rises. I started experimenting. Turned off the computer, I ping with phone xperia z1, and the situation repeats itself. I turned on the computer again, thought of turning off wifi on the router, and the downloads were gone. I turned on the wifi, but I connected only one phone and the xperia z1 (that is, a computer on the lan port and a phone on wifi). I have already started monitoring applications that do something during the jumps, but to no avail. I tried to disconnect the phone and connect the tablet, it didn't work either (the jumps remained). Now I don’t know what to do. I'm coming to you for help. Thank you in advance!
The latest firmware is V5.07.63.1_ru_OST03, taken from the office. site.
I'm sticking screenshots from PingPlotter "a (I learned about it on the tank form).
Some facts:
Router IP: 192.168.0.1
Network card on the computer: Qualcomm Atheros AR8151 PCI-E Gigabit Ethernet Controller (NDIS 6.20)
When connected directly (without a router), there are no jumps
On the factory firmware (before the update), the jumps were also

Answer: Why does it die at fixed intervals? 2 minutes or 2 minutes and 15 seconds. It confuses me, what happens to the router every 2 minutes? How can these intervals be explained?

Question: Ping jumps on the route

Hello everybody. I've been suffering for a month now, I don't know what the reason is. The whole thing began on March 1, before that it worked like a clock for 5-7 years.
The essence of the matter is this. Ping jumps from the router (Wi-Fi) to the computer and other mobile devices.
Rotuer D-Link dir 300. So, what did I do on it? Yes, in general, that's all. I changed firmware, changed channels from 1 to 12, changed Wireless mode 802.11 (everything, there is n / g / b) (n) (g / b), changed Mhz 20 only, 20/40 and alternated it all.
I bought a new ASUS RT-N12 router, and everything is the same on it, I worked fine for 1 day, and then it went. Friends, I really don't know what to do anymore. I ask you to help me in this not an easy matter. thanks

Answer: dCan external sources of interference? 2.4 GHz devices

Question: Ping jumps from Wi Fi adapter to Wi Fi router

Good day. Krch the problem is standard: ping jumps over wi fi .. Router TL-WR841N, the adapter is connected to the computer, model D-link DWA-127 ..
Screenshots with "ping 192.168.0.1", to the router, that is:

Screens of Wi Fi router settings:

Adapter parameters in Plug & Plays ..:

Screens of Inssader:

I tried everything ABSOLUTELY !! Changing the channel, the power of the router, picking up the digits of the beacon interval, the RTS threshold, changing the key encryption, broadcasting mode, channel width, channel number, removing / removing jackdaws EVERYWHERE !! I changed the adapter parameters one by one, choosing a more stable mode .. FOR HIM ON ... TH !!! I tried to use another adapter: NETGEAT WNA 150 - the same song, only that one also turned off when it overheated (when working for about 10-15 minutes) .. I had to reconnect it from port to port .. I connected both to USB 3.0 and USB 2.0 , the result is the same !! Reinstalling various drivers did not help either.
I rummaged about 30 pages in Google and found NOTHING that would solve my problem .. Hands dropped, this post is a cry from the heart .. I connect to the grid from a beech - everything is fine, no ping jumps. So I'm 100% sure that the problem is only in the hardware connected to the computer. In particular, in the adapter. Clever people with their channel changes, router replacements, driver reinstallations - LESOM !!! I'll figure it out by the IP address, I'll come and look in your eyes ..)
Guys, help me out .. I don’t know what to do anymore ..
Oh yes, Windows 7 Ultimate "Pirate Editioin" ..))

Added after 7 minutes
Too late I tasted that the quality of the screenshots I chose is fig ... Write it down, if I need it better, I'll throw it off.

Added after 2 minutes
Here is a ping screen, otherwise it just sucks ..:

Added after 6 minutes
Here are some better screenshots from Inssader:

And yes, the router is new, the DWA-127 adapter is also new .. everything is fine with the Internet, it works fine on the cable .. But the possibility of throwing the cable to the computer permanently is not possible, so you need to solve the problem with the wireless connection ..

Added after 5 minutes
I forgot to add - I also changed the router's firmware ..

Added after 13 hours 11 minutes
The problem was partially solved by removing the Viber program .. Ping began to jump much less often.
Perhaps from here and it is necessary to dance .. Any suggestions?

Answer: Quite right - a bug in the Viber program. I have exactly the same problem, it was solved - by demolishing Viber from the processes. Every 2-5 seconds the ping jumped to 2000ms. Although also in search of a problem, I changed the router and the whistle. I changed the firmware in the router - everything is not right. Everything turned out to be much easier. I will write to the support now.

Question: High ping to router

Router - eci b-focus 0-4g2pw
External Wifi adapter - ASUS USB-N13 300Mbps 11n Wireless USB dongle
Windows 10
Wifi is designed like this, a router distributes in one room, receives an adapter through the wall and transfers it to a laptop via a 5 meter usb wire.
At times, ping spikes, and more recently, interruptions in the Internet connection via Wifi.
Previously, there was no problem, the driver for the adapter was new, I reinstalled.
I checked the ping to the router - sometimes it rises, it happens for a long time and sometimes it breaks off. And it doesn't matter how loaded the network is, maybe no one is consuming anything and there is a ping, you can consume a lot and everything is fine.
The channels are clogged, but I changed to others, but there is no effect, although the channels were clogged before, and everything was fine with the ping.
I did not change any settings.
The network is encrypted, no one else was connected.
Usually 2-5 devices are connected to wifi.
Digging around on the Internet, I found complaints about Viber, deleted it, it didn't get better.
I attach the screenshots.

Answer: everything is just crammed here

Question: Ping jumps and packets disappear

Good evening everyone, the problem is this, a wire with the Internet is connected to the laptop and Wi-fi is distributed from it, everything is fine with the distributor, but for those who are connected, ping jumps, packets disappear, distributed through the command Windows string 8.1

Answer: from clients a screen from the inssider program

Question: Ping jumps, packets disappear. zyxel keenetic omni 2

Ping skips, packets disappear. zyxel keenetic omni 2
Help kind people. There are many similar questions on the forum, but not a single solution

Answer: tro9lh, the problem is visible on the screen
switch to 5 GHz or kill neighbors

Q: Packet loss is constant. Ping to the router - 0%, to Google - 1-10%; Is the provider to blame?

I sent 1500 packets. I pinged 3 more different sites and 8.8.8.8, from 1-10% it jumps to traces 1-2 stars opposite the provider's host and before Rosnadzor in Crimea. Both by cable and wifi from different devices. Started 4 days ago.

Answer: HotBeer, apparently referring to the percentage of packet loss.

Message from HotBeer

Regarding tracing, if the next node is responsible for the router, and then the problems are definitely the problems of the provider.

Agree.

Added after 2 minutes

Message from HotBeer

if the next node is responsible for the router

I would reformulate. "if the node following the router is responsible" (that is, the terminal port of the provider's equipment)

Question: No internet, who is to blame - adapter, router or ISP?

If you've heard about dancing with a tambourine, that's exactly what I'm doing at home, trying to restore INET. Here's an example: I have a utility on my computer that shows the download and distribution schedule of INETA. As soon as the Internet disappears, I take my mobile, wake it up, start WIFI and connect, VOIL, the Internet appeared on my computer. Or a more durable method: you press on the RESET modem and completely set the modem / wifi settings from scratch. YOU CAN NOT DO IT THIS WAY!!! I tried to reinstall firewood on the adapter (I have a plug-in PCI) and installed new firewood on the modem-zero-all too. I have an ADSL CONNECTION, it seems to be not stable, but not to the same. The Internet comes alive when I connect to it through my mobile-WHAT IS IT ?? Vinda changed both BEFORE AND AFTER Reinstallation, it was all. WORTH NOD and firefall CHEST. MODEM is somewhere 2-3 years old, but the truth is he rarely turned off, count 2-3 years of continuous work. Option so that I would stretch the cable and use it and not fool your head _DO NOT OFFER! in general, please tell me WHAT COULD BE THE REASON. It happens very rarely: once at a time it is not necessary, since it will be 10 seconds and another, 5-10-15 minutes. NO SPEED AT ALL, no page opens, torrents are loaded at a speed of 0.1-9 kb / s

Probably the worst nightmare of any avid gamer is a high ping in the game. And how to lower it is one of the main questions in such a situation.
What are pings? This is the time of passage of a special ECHO package from the computer to the server of the online game (World of Tanks, Warface, CS, etc.) and back. It is best played when it is low. With a high ping, it is bad to play and everything slows down. If it's too big, it's impossible to play. There are delays, which in the language of gamers are called "lags". What can be done and how to be in this case ?!
First, you need to determine which ping is good, which is normal, and which is bad. Well, everything is simple - the lower the indicator, the better. On average, a good ping is considered up to 30-40 milliseconds. From 40 ms. up to 100ms, depending on the game, is considered normal. But above a hundred, the indicator is considered bad. But here again, light and uncomplicated online games can work fine at high values ​​(for example, the old "Contra"), while the same Dota or Warface will start to lag wildly.
There are two kinds of factors that affect response speed - which depend on your hardware and which depend on the provider. How to define "Where to dig"?

This trace immediately shows that the problems begin immediately, already on the subscriber's equipment, namely on a home router or modem:

And the next trace shows the appearance of significant delays on the 4th hop, that is, already on the provider's side:

For reference - all points after the first, that is, after your equipment, this is already the area of ​​responsibility of your telecom operator.

If the problem is on your side:

First things first, eliminate any third-party load on the communication channel. Do not be surprised that the ping is high if at this time you are downloading two or three movies from the Internet. Disable the torrent client and any other file-sharing programs. Check if any application is downloading a large archive with updates.

The second thing that can significantly affect the response rate is the firewall, or firewall. Try to add the game to the list of exceptions in order to reduce the ping. For the sake of experiment, you can try to turn it off altogether and take a measurement.

If you have a router and you are connected to it via WiFi, then try connecting via a cable and see if there is a difference. The fact is that sometimes, for various reasons, the speed wireless network can drop significantly, making the connection unstable and even losing packets. The cable connection will be able to completely exclude such a scenario.

Also, sometimes placing the computer's IP in the DMZ in the router settings helps to reduce the ping a little. This way, most of the packets are sent directly to the computer without being filtered by the router's firewall.

Ping increases on the provider side:

If there are any problems on the side of your telecom operator, then in this case there are only two ways out to lower the ping in Warface, Worlds of Tanks or another game.

1. Communication with technical support
This path can only give results if high ping starts already at the second or third step of the trace, that is, the reason is in the line or access equipment.
For example, if you are connected using ADSL technology, then it makes sense to apply for enabling the special “Fast Mode” mode on the port. It turns off the error correction mode, due to which the travel speed is slightly increased. But it won't be possible to reduce pings especially strongly with this.

If you are connected via fiber optic (FTTB, GPON), then it is unlikely that anything can be done at all. Therefore, it remains to wait. This may be due to a malfunction. network equipment and the next couple of days, the malfunction will be eliminated and the ping will become normal.

2. Change of provider
If the trace to the game server is very large (12 steps or more), then it makes sense to walk among friends connected to other telecom operators and start tracing. Providers usually use different trunk channels and you can choose the one who will have the shortest trace and the smallest ping. Most often, by the way, this is the only working way to reduce ping and achieve a high-quality and comfortable level of network play.

Now it becomes even easier to check the quality of the connection. The built-in tools of modern routers greatly expand the user's experience. You can get statistics on the quality of the connection with the built-in means of Wi-Fi routers, ping and traceroute from a Wi-Fi router by connecting to a Wi-Fi router, even from a phone wirelessly. How to check the quality of connection with the Internet through a router, and what is ping and tracing.

What is a ping to a site or to an IP from a Wi-Fi router?

Ping utility, which can be run on Windows and Linux systems using the command line, shows statistics (time of packet movement to / from specified IP and percentage of loss packages, i.e. units of information lost on the road). This utility can be run both on a computer and on some routers, especially if it is not possible to use a computer.

What do we need for verification?

Have tablet, phone (smartphone) with Wi-Fi and internet browser. Then, it takes enter the Wi-Fi router settings. To do this, you need in the address bar of the Internetbrowser, enter the address 192 .168 .0 .1 or 192 .168 .1 .1. Then you need to enter in the "username" and "password" fields, your own name and password, in order to get into the Wi-Fi router settings. By default, these are usually admin and admin.

We carry out ping from a Wi-Fi router from TP-LINK

For example, was taken TP -LINK tl -wr841nd like most routers from this company, it supports the ping and traceroute utilities. In the settings of the router in the tab "System Tools" - "Diagnostic". Opposite "Diagnostic Tool:" select "Ping" or "Traceroute".
Then in the "IP Address / Domain Name:" field, enter the address of the site with which we will check the connection. You can also change the parameters of the ping utility. "Ping Count:" is the number of packets that will be sent, usually set to 100. "Ping Packet Size" is the size of the sent packet, the larger it is, the more on the network, the maximum value is 1472. "Ping Timeout" is not that important, you can leave it alone.

To start ping, click the "Start" button.

In the "Diagnostic Results" area, you can observe the result.
The line "Packets: Sent = 100, Received = 100, Lost = 0 (0% loss)" indicates that 100 packets were sent and 100 packets were received, loss is 0%. And if there are problems with the network, then Lost will be more than 2.

Ping on ASUS Wi-Fi router

Again, not all old firmware of ASUS RT routers contain the ability to use network utilities. Therefore, we advise you to update the router's firmware if you cannot find this functionality there. Let's get started.

It is required to enter the address 192 .168 .1 .1 in the address bar of the Internet browser. Then you need to enter "username" and "password" to enter the settings. Usually, if they were not intentionally changed, these are admin and admin. In the window that appears, select "Network tool" from the menu in the "Method" drop-down list, you can select the utility you want to use. In the "Target" field, enter the address of the resource with which you are checking the connection. Go to the "Count" field - the number of packets.
In the window below the parameters, you will see statistics similar to the one we described for TP -LINK.
That's all, ask

Every modern child living with video games, and an adult too, has probably repeatedly come across such a concept as "ping". It is also an integral part of the computer networks set up by the master. Next, we will consider in more detail that this concept means and how to reduce ping to optimize gameplay or network performance.

What is ping and how to check it

Ping is a time period during which one information packet is transmitted from the client to the server and returned. Associating this process with real life, we can say that ping is like the time spent on the transition from home to the store and on the way back. The store is the server and the person is the client. The unit of measurement is millisecond (ms).

To determine the ping of Windows OS, it is enough to enter the command line by entering the cmd command in the Run menu, which is called by the "WIN" + "R" key combination, or search string Start menu.

Then, you need to enter the "ping" command and specify the address of the remote machine / site separated by a space, the connection to which will be checked.

As you can see in the screenshot, the basic information allows you to see the average value and determine if there are sharp changes in case of a bad connection.

How to reduce ping - current ways

There are a number of basic actions during which the user may think that the ping value should be reduced relative to the connection to a particular server / site. Of course, this is necessary when it comes to playing online video games, where it greatly influences how the player's battle goes. It may also be required when setting up an integral computer network, where you simply cannot do without a high-quality connection.

If it is excessively high or constantly "jumps" relative to any of the directions of the client's connection to the server, then the problem may be as follows:

• Bad internet connection. It is corrected as follows: the method of connecting to the network changes (the modem changes to a direct cable connection or another), the provider changes, if a low-quality connection is its flaw, the tariff is updated to increase bandwidth channel allocated to the client.
• Outdated network card driver. Everything is quite simple - you need to update it by downloading the necessary files from the manufacturer's website or any other thematic resource.
• Viruses, startup list, bootloaders. All of the above can have a negative impact on the speed of the network. Naturally, the system must be cleaned of viruses, the startup list must be adjusted, leaving only what is necessary, the bootloaders must be disabled at the time of the game or any other actions related to connecting to a specific server. The latter is especially true for torrent clients, which, when downloaded, can "fill up" the entire Internet channel allocated to the user.

You can also make certain changes to the system registry, but you should do it with caution, remembering that the consequences of the performed actions with the registry are sometimes quite difficult to fix.

By starting the registry with the "regedit" command entered in the same paragraphs as for command line, you need to do the following:

You can create non-existing parameters, but, again, we remind you that it is better to entrust the introduction of such changes to a specialist who feels confident when setting up the system registry configurations. All these actions will help reduce, but be careful.

How to reduce ping on the modem

People who use 3G modems to connect to the Internet are a separate category of users. The problem with working with such equipment is that they pick up the signal from mobile towers various operators, but this signal itself can be blocked by anything. All actions to improve the operation of a 3G modem and reduce ping require an increase in the power of the device itself.

Experienced players and specialists in working with such devices recommend the following methods of signal amplification:

Each of these actions will positively affect the speed of the Internet and significantly reduce the ping. You can check the connection level through the MDMA (Mobile Data Monitoring Application) application, which, after downloading and launching, will determine the connected modem (maybe not the first time), and then give the signal quality value in dbm units. Dynamic reading of information in real time with a delay of 5-30 seconds will allow you to determine the best place to place the modem.

How to reduce ping in games

Finally, we come to the most important stage, since the decrease in online games worries users most of all, because poor Internet connection and its other defects affect their success during battles. Let's consider making the necessary settings using the example of two very popular games: World Of Tanks and Counter-Strike: Global Offensive.

How to reduce ping in CS: GO

When playing CS: GO, you can change the ping by all the means described above, as well as by competently making changes to the launch parameters. To do this, you need to enter the library of games of the STEAM platform and select CS GO in it. Further actions are shown in the screenshot.

In the window that opens, click "Set launch parameters" and enter the values ​​shown in the screenshot in the line that appears.

Also, the player is advised to indicate to the game the optimal ping to start the competitive mode, so that it does not select servers for him more than a certain bar, if this, of course, is possible. To do this, in the menu "Settings" - "Game options", you must set the slider to the minimum value.

How to reduce ping in World Of Tanks

The peculiarity of World Of Tanks is that the game is carried out on a large number servers, each of which is located regionally in different places... Below is the geographical location of the main servers from the Russian cluster of the game.

You can control it by installing a special game modification or software, such as WOT Pinger.

With the help of this software, you can track the servers that are most optimal for the game and use them exclusively.

Thus, we can conclude that ping has a significant impact on the efficiency of working with certain servers / sites. To reduce it, you can use any of the above methods. You can also contact specialists who will make the necessary settings in the system and specific applications, significantly speeding up the operation of your computer / laptop. It is recommended to order the same setting from the provider, where the user will be able to tell which high-speed Internet access tariff will be much more profitable for him.