Protective film for tablets: features. Protection for display: Does she need
In this article, I will tell you how correctly gently paste the protective film on the display of your tablet or the same smartphone. The protective film is simply the necessary accessory that will take care of the screen of your device from dust, scratches, mechanical damage etc. The most interesting thing is that in a few months you can return the device for the ideal type of simple film replacement. But many have no idea how correctly and beautifully shove it, here in this article we are in this matter like and understand.
How to stick a protective film:
1) First, prepare soft lint-free napkins for cleaning the device display. Ideal fit napkins that are used to clean the LCD monitors.
2) An ideal place for film stickers is a bathroom, because as a rule there is the least dust. Before sticking, it's well wash your hands with soap in flowing, warm water, wait until they dry themselves, wipe the towel is not worthwhile. It is still recommended to include not for long a hot shower so that the level of humidity in the bathroom rose, and all dust dust.
3) Very carefully wipe the device screen with a napkin that we have prepared earlier, we make sure that the dust particles are left, fingerprint or other contaminants. For better cleaning, you can use spray for LCD monitors or some water. In no case do not wipe the screen with household cleaning agents or means that contain alcohol!
4) Now we will open the packaging, and get a film from it. The protective film according to anyone must have a special transportation coating with stickers. As a rule coatings are called STEP 1. and STEP 2.. Do not take STEP 1 entirely. Sticking is better to start with a straight and wide part of the display. Carefully remove the STEP 1 of the approximately centimeter to three and smoothly apply the edge edge to the edge of the screen. The following picture is obtained: the protective film only stuck to the screen, it can be tightly pressing, which makes it possible to see us exactly gluing, and if not, if you wish to disappear without difficulty.
5) After making sure that the film is glued smoothly smoothed it on the surface of the screen, gradually removing Step 1. In the process of adhesive on the surface, air bubbles will appear, simply take a credit card and spend several times on the film, bubbles will leave (the smallest remains, they will disappear through themselves Some time). If large bubbles do not leave, it means that the garbage or vice hit these bubbles, it is possible to struggle with which it is possible only by turning off the film, removing the dust and re-sticking and smoothing.
6) When the film is completely pasted completely, the bubbles are removed, you can remove the STEP 2 protective layer from the front side and start using the device.
A few more advice:
Film good quality you can remove and wash under the jet of water if dust snapped on the back side, but you should not do it often
- In the process of operation, the film can be cleaned by any non-aggressive means and better just with water.
- If you exploit it correctly, it will last at least 12 months.
- If, in the process of applying a film, several dusty still fell under it, you should not shoot and wash it! You are hardly the next time you can glue it better. And the dusty will become less noticeable after a while.
- It is recommended to purchase a film immediately when buying a device. Since the screen of the new device is protected by a technological film by removing you will receive a varical clean screen.
- You never wipe the screen perfectly - there are always villi and dust (or they will fall out until you glue). To remove them best suits paper tape! Or any scotch does not leave glue on the surface after digging.
- If dust left after sticking, remove the edge of the film and the same paper tape remove dust and pile. Fully the film is not necessary.
- You need to change the film once every six months or less if you see that the film is in good condition.
First of all, you must carefully examine the factory packaging. It should not be dents or breaks. This ensures that the device was not during transportation, and also allows you to make sure that the box was not, and this is a new device that was not returned by the former user.
Check the tablet package. The set must include charging, a USB cable is often applied; to some tablet computers The memory card is attached, OTG cable, headphones, cover (at the discretion of the manufacturer). Full list Accessories can be obtained from the attached documentation.
It is advisable to check the job chargerso that after the arrival home there was no surprise. Carefully inspect the body of the tablet for mechanical damage, scratches, chips, etc. Check if the glass from the housing is not departed. Slightly squeezing triggers in various places, make sure there are no sketches.
Then it is worth estimating the help of the screen. While the device is in the off state, look at yourself, there is no light on the display of lights or light points. If there are defects, you have the full right to require the replacement of the device.
After incorporation
Now turn on the device and estimate the health of the screen matrix. Faulty elements on dark screen They will shine white or, on the contrary, on the bright screen - dark. "Bied" pixels are a serious basis for replacing the gadget. Turn on your own, without the help of the seller.
Be sure to make sure that touch screen Does not have insensitive zones. Run applications whose controls are located in different screen zones.
Turn on one of the preinstalled on the melodies - with good speakers, the sound must be loud enough, without rustling and crackling.
If the store has wireless wi-Fi networkIt makes sense to check the operation of the radio module of your device.
Check the camera cameras by making several pictures. Make sure that they do not have "dead zones". Such defects indicate a malfunction of a photosensitive matrix.
Typically, the tablet is ready to use after you get it out of the box. That is, there is already some software. Note also to support this google devices Play - old android version OS frequently refer to applying applications.
The incredible joy of the acquisition of a new tablet can overcome the gradual deterioration of it after a while external view. And it is not surprising, users actively use the device, spending a few hundred times one day with a finger across the screen. From a slight touch, of course, problems do not arise. However, it is important to take into account that sandbanks can fall on the screen, which can be easily hooed with fingers and provoke small scratches. The reasons for the deterioration of the appearance of the device a lot. Actually, they are not so much interested in the owners of new tablets, heard about the aesthetic problems of the device, how many of them are interested in the question of what actions to do to protect the screen from damage. The answer to this question is easy to find. Experienced users, specialists from service centers strongly recommend purchasing a special protective film. Many agree to acquire, but how to stick this film on the tablet, not everyone knows.
Recommendations for the sticker of the protective film on the tablet screen.Rules of sticking film
A professional assistance in sticking a protective film on the tablet screen can masters of service centers. However, such a solution to the issue does not suit some tablet owners. First of all, it is sometimes there is no possibility to visit the service center. Some tablet owners cannot afford to take advantage of the professional service, since they are experiencing financial difficulties, so they seek to constantly save. Put the protective film on the tablet screen can be without visiting service Center. Having studied the recommendations provided, it is possible and at home to perform manipulations, having received the desired result, not different from the one that could be obtained when contacting the service center.
Whether film is needed on the tablet
Doubt in doubt, is needed a special protective film on the tablet, many are not solved to make a purchase. However, at such moments seek to significantly limit the operation of the device. Experts claim if the tablet is purchased to use it only at home for a short period of time, there is no particular need for a protective film.
If the tablet acts as a faithful user satellite, it is used in various conditions, including in public transportOutside, then it is recommended to provide additional screen protection. In additional protection, the devices are needed in the event that the tablet is worn in a backpack or bag, where other items are located in the neighborhood. However, the scratch protection of the scratch is not the only reason for the purchase of a special film. It is she who favors:
- improving the appearance of the tablet screen on which small scratches are already available;
- blocking ultraviolet rays emanating from screens, which makes it possible to significantly reduce the stress of the eyes during continuous operation;
- reduce the negative effects of sun rays;
- prevents excessive palphell;
- the emergence of glare.
Making sure the need for such additional protection, the owner of the device should understand the intricacies of its sticking, how to gently stick to avoid aesthetic defects. After examining the features of the sticker of the protective film, to prevent the occurrence of any errors will be easy.
Types of protective films
The first thing you have to do is to visit a specialized commercial institution to purchase a film. However, it is important to consider that there is a few of its varieties, and you only need to choose one of them:
- glossy (this option is immeasured, but allows you to protect the screen from scratches, while maintaining the brightness and quality of the transmitted color);
- matte (this option is equipped with an anti-reflective coating, therefore, especially welcomed by users seeking to maintain comfortable conditions for working with the device under all weather conditions);
- shockproof (possesses maximum level protection, even when falling, the screen remains whole);
- confidential (allow you to view the displayed information on the screen only at right angles, which are near third-party observers will not see anything).
Important moments
Studying information, how to stick a protective film, you will definitely encounter a recommendation for the selection of the films of the appropriate size. There is nothing easier than to inform the model of the model of your tablet to the shopping institution. Much worse if you do not manage to find a film under specific model None, nor in the second or in any store. However, in this case, there are no reasons for disorder. You can buy a larger film.
The size is determined on the diagonal of your device. After the acquisition, you need to use manicure scissors and carefully cut the protruding surfaces after the completion of the sticking process. Before sticking, it is possible to trim too, but in this case there is a risk of incorrect trimming. One of important moments Also is the quality of the film you acquire. Saving at its cost, you risk damageing the screen to restore which you have to lay out a more round sum.
How not to ruin the tablet
The gluing process will be accompanied by a high result, if it is properly prepared. Consider that you have Jack Pot if you purchased a new tablet on which there is a primary film. If there is no such, then you need to degrease the screen and clean it from the sands, dust. To do this, you will need to purchase a special tool for cleaning monitors, as well as a small flap from microfiber.
It is strictly forbidden to use alcohol-containing products or water as alternative means. Water is not able to ensure degreasing. Using alcohol-containing means, you can provoke, on the contrary, damage to the screen, since the alcohol destroys the structure of the material from which the display is made. Before gluing, it is important to make sure that there are no grains on the screen. Otherwise, the film will not be able to lie tightly, respectively, it will begin to strain.
It is also important to prepare the room in which it is assumed to be carried out by manipulation. It is better to stop your choice on the bathroom, it concentrated a smaller amount of dust, which under the influence of high humidity does not rise up. If such an opportunity is excluded, then any other room must be removed, wipe the dust, work a spray gun to be aspired flying in the air of the dust.
Independent film sticker
We emphasize your attention on the fact that before glue a film on the tablet screen, you need to prepare such "tools":
- dense plastic card (can be bank card);
- microfiber napkin.
The film has two protective layers. The first lower layer is removed and then glued to the screen. The top layer is removed, and under it there is a final matte or glossy coating. As soon as you separate the bottom layer, in no case touch your fingers to it, hold gently only by the edges. Attach the film to the bottom edge and slowly begin to glue, armed with a plastic card that will help ensure a dense fit. If you notice the air bubble, do not be discouraged, try to drive it out with the same plastic card. When the film is glued, remove the top protective layer and turn it out with a microfiber cloth.
So, to stick at home the protective film on the tablet can be able to anyone who has such a desire. It is only important to be pre-armed with theoretical knowledge, to understand the sequence of all listed actions.
In most cases, the film is a transparent plastic, which has a property to hold on the screen. Although this material is relatively inexpensive, there is one nuance here: the diagonal of the screen mobile device It can be from 3.5 to 10.5 inches, which implies the need to search for a film suitable in size. Another option is also available - buying a large sheet of plastic, from which the desired piece is subsequently cut.
Disadvantages of transparent plastic
Many it seems that a transparent film is the perfect sensor display element. This is not true. Problems can begin at the stage of plastic sticking on the screen. Under the film, after applying it, air bubbles may appear, which will lead to the need to do a re-procedure.
Another lack of material is the appearance of scratches from items that could not harm the screen itself. Many such damage leads to the need to remove the old layer and apply a new one, otherwise the type of smartphone will be completely non-primable.
Not perfect and specifications Films. It is advisable to keep in mind the following nuances:
- Cheap material has a negative effect on the sensory properties of the screen;
- Plastic is transparent by 99%, which makes the image slightly vague and muddy.
If the decision to use the film as the display is still accepted, recommendations should be taken into account. Step by step this procedure may look like this:
- The screen must not be clear from dust, but to rub with soap solution;
- Starting from the top of the apparatus, apply a tissue film.
Gorilla Glass from Corning - New Technology
The question of protecting sensory screens of mobile devices was delivered more seriously with the appearance of tablets on android database. In the situation, Corning was quickly oriented, submitting gadget manufacturers the opportunity to apply the display on the display at the stage of manufacturing the device. A novelty turned out to be a protective glass, when applied which there was no airbag, the image was not distorted.
New technology Although used by manufacturers of tablets, but still had one drawback - the complexity tempered glass Installation. Everything has changed in 2013 with the advent of Gorilla Glass 3 - an even more advanced product from the same Corning. The glass has become 40% more stable, and the comparative simplicity in the installation attracted attention to the company's products of manufacturers of smartphones. Now, if it comes to the cheap Chinese fake, almost all mobile devices of this category are equipped with such protection.
As practice shows, the Gorilla Glass screen cannot be scratched with a coin, a key, a screwdriver, a different object. There are doubts? It is easy to make sure that the video on the appropriate topic is reading in the network.
When without a protective film, it is still not to do
Gorilla Glass glass can withstand the effects of materials created by man, almost immaculately. It suggests the conclusion: the protective film is not needed. This is not quite so. There is still sand - a substance capable of leaving scratches even on the screen with such a serious coating. This is the reason why mobile devices with liquid crystal displays are not recommended to take on the beach. If there is no choice, in this case, it is worth sticking a protective plastic on the display, which will save from the appearance of scratches.
Articles and Lifehaki
After buying a new mobile device, people tend to immediately run home, so that without a delay will plunge into his unique magic world, although experts recommend lingering in the store and buy several important accessories to their new friend.
For example, a protective film for tablets is the accessory that needs to be purchased primarily because it will help protect the expensive gadget touch screen from scratches and pollution.
Types of protective films
There are quite a few types of films. More expensive films have a large thickness and less distort the image on the screen, and less expensive films can be slightly thinner, so they will have to replace them more often.In fact, the protective coatings for the screen can be divided into two types:
- Matte films. They are more dense by texture, so they are almost not visible scratches and fingerprints. Although the use of matte films can lead to a decrease in the brightness of the screen, which significantly reduces comfort from working on the tablet.
- Glossy films. Scratches and traces of fingers are more noticeable on such coatings, although they do not affect the display brightness.
Why do you need a protective film
It can perform the following functions:
- First, it protects the touch screen this device (which, by the way, is not so cheap) from possible scratches that may appear in the process of use.
- Secondly, if there are damage or scratches on the screen, the use of the film helps to correct the situation. That is, the protective coating can literally transform the old display, which can be very useful before selling the device.
- Films have the ability to block 99%, emanating from the ultraviolet radiation screen, which is known, does not affect human eyesight very well.
- When you click on the screen, covered with a film, the fingers sweat much less, which means that it is practically no fingerprints.
