Disable proximity sensor on Android. how to disable proximity sensor on android phone how to disable proximity sensor asus zenfone 2

The Android operating system contains many useful features, but some of them may not be needed, in particular the proximity sensor. This is a special sensor that is installed on the front side of the device, and when an approaching object is detected, it performs some action, in particular:

1. Turn off the backlight of the phone when bringing the smartphone to your ear;
2. Automatic call reception when the motion sensor is triggered;
3. Automatic increase in volume when the phone is directly in your pocket.

In some cases, it does not work correctly, so users, for ease of use mobile phone prefer to turn it off. There are several ways to disable the sensor: using default settings, using third-party software, and using

Using default settings

Simple and extremely affordable way disable the proximity sensor on Android - use the standard settings. In every model given function may be located in different places. However, the general "formula" for turning off the sensor consists of the following steps:

1. Go to the "Settings" section of your android smartphone.
2. Select the sub-item "Calls";
3. Find the item "Proximity sensor", and then uncheck it.

In some devices, this item is called differently, in particular, "turn off the screen during a call." After that, you can make a call and check that everything is disabled.

Using third party software

There are times when such manipulations do not give any effect and the proximity sensor still works as before. No need to be upset, because on the Internet you will find several applications that allow you to disable this sensor bypassing the standard android settings.

One such application is Smart Screen Off. It provides a wide range of customization options various sensors and phone buttons. The functionality of this program also includes disabling the proximity sensor. In the program interface, you need to find the corresponding item, respectively, disable the proximity sensor.

After that, when you call and bring the device to the auricle, the sensor will not work, i.e., it will not perform any actions. You can download the app at Google Play, and then:

1. Enter the name in the search bar;
2. Go to the program page;
3. Click install.

Engineering menu and service codes - the solution to any problems

Most modern mobile operating systems, including Android, have a so-called engineering menu. It is an advanced smartphone settings with which you can adjust almost any component of the phone, including the proximity sensor if it does not work properly. Before using this menu, be sure to read all the information you can find on your model. The engineering menu is used only by developers or advanced users. Installation wrong settings can lead to extremely unfavorable consequences. To enter the engineering menu, you must:

1. Turn on dialing on your phone.
2. On the keyboard, type the following combination of characters - * # * # 3646633 # * # * (depending on the manufacturer, there may be other combinations).
3. If after that the engineering menu does not appear, press the call button.

There is an easier way - to enter service code. This is a special combination of symbols and numbers, thanks to which you can perform a certain action. If the sensor does not work correctly, you should find the code for your particular phone model by which the shutdown will be performed. Be sure to check out several online sources of information as there are engineering codes that produce .

Other solutions to the problem

Incorrect operation of the sensor can be associated with errors in the Android OS. Try updating and then go to new version. To do this, follow these steps:

1. Go to phone settings.
2. Select "About phone".
3. Click on System Update.

Most often, the proximity sensor (or Proximity Sensor) is installed in the same area as the lens front camera and speaker. Therefore, if you bring the smartphone to your ear during a telephone conversation, it will send the appropriate signal to the processor and lock the screen, protecting it from accidental clicks.

If the sensor has stopped working normally or you don’t need it, then we will tell you how to disable the proximity sensor on Android.

On some Android devices the proximity sensor is disabled through the standard settings menu. Depending on the version operating system this option may be hidden in different menus. Procedure:

Step 1. Go to "Settings" and here find the item "System Applications".

Step 2. Click on a line "Challenges" and select "Incoming calls".

Step 3. Find a line "Proximity sensor" and move the slider to the state "Turned off".

Depending on the manufacturer of your smartphone and the version of the operating system you are using, the names of some menus and options may differ.

How to disable proximity sensor via Sensor Disabler

Price: Free

If in system settings there is no required option, then on an Android phone you can try to disable the sensor using third party application. In this tutorial, we will use Sensor Disabler. Procedure:

Step 1. Run Play Store and download Sensor Disabler to your phone. Wait for the installation to finish and click the button "Open" to get started with the app.

Step 2. Call up the menu "Settings". To do this, swipe to the right or click on the icon in the form of three stripes (in the upper left corner). In the menu that opens, click on the item Proximity.

Step 3. Select "Remove sensor" to turn off the proximity sensor ( "Don't Nothing"- leave the default values, Mock sensor values- calibrate values ​​manually) and click on the icon "Save" in the lower right corner.

The changes will take effect immediately. With the Sensor Disabler, you can also revert back to default at any time. To do this, in the settings Proximity should choose "Don't Nothing".

How to calibrate the proximity sensor

Price: Free

If the proximity sensor stops working properly (for example, it doesn't work when approaching or randomly blocks the screen while listening to voice messages), then it can be calibrated. To do this, you will have to use a third-party application.

In this tutorial, we will use the "Proximity Sensor Reset Repair" utility from Mobile Direction. This is free app with which you can configure the proximity sensor on Android. Procedure:

Step 1. Run on phone Play Market and use the search bar to find "Proximity Sensor Reset Repair".

Step 2. Click on the green button "Install" and wait for the installation to finish. After that tap on "Open" to get started with the utility.

Step 3. On the main screen, tap on big button "Fix It".

Step 4. Calibration instructions will appear. Follow the on-screen prompts to set up your sensor.

Step 5. At the end, click on the checkmark icon to confirm and save the new calibration settings, and then click on the button "OK".

Reboot your device for the changes to take effect. If, after the steps described above, the sensor has not been configured, then most likely the problem is of a hardware nature and the device needs to be repaired.

Users modern smartphones in various circumstances, it is relevant to learn how to disable the proximity sensor on android, which is activated when you try to bring the device to your ear during a conversation. In general, such features are quite useful and allow, in addition to lower power consumption, to prevent accidental touches. However, if you need to simultaneously use the messenger or smartphone while bringing your hand to the device, the display may turn off. Also, in situations where the screen is not deactivated during conversations or, conversely, turns off uncontrollably, it is highly likely that the cause of the problem is represented in the built-in sensor.

Main problem

Owners mobile gadgets and experts often point out that dirt accumulation is a common cause of problems with the proximity module. It is localized in the upper area of ​​​​the case, while in addition you can find a number of other sensors that are built into the smartphone. Visually, the elements resemble small slots located near the speakers and covered with glass. In case of debris penetration, the performance of the components may be impaired, therefore, before fully deactivating the sensor, it is recommended to thoroughly clean the device.

To eliminate foreign particles from the speaker for normal operation, a few simple steps are suggested:

1. Turn off your smartphone and use compressed air on the speaker grille;
2. Make sure to remove all dirt, if necessary, you can use a toothpick or other improvised means that will be effective in removing fine dirt or dust;
3. Restart your device and try to use the functionality normally.

How to disable the proximity sensor on Android

To perform the procedure yourself, you need to implement a simple procedure on your smartphone:

1. Open the desktop and go to the settings section, after which the category " System Applications»;
2. From the menu that opens, select the " Telephone»;
3. Go to " Incoming calls»;
4. Deactivate the proximity module by unchecking the corresponding function in the interface. The whole process and individual steps may vary slightly on different smartphones using other software versions Android software and branded shells. In this case, for the current instruction, we used Xiaomi smartphone with MIUI version 9;
5. Upon completion, check the result during the conversation. If all actions are performed correctly, the display will not turn off when the smartphone approaches the ear or when objects are brought to the sensors on the front panel of the smartphone.

Disable Proximity Sensor on Android Using Tools

If the above instruction is not effective in practice for individual reasons, then you can use a specialized mobile program Smart Screen Off. In fact, the program, in addition to the tool for deactivating modules, allows you to perform calibration, which helps restore correct operation in case of problems.

The application can be downloaded independently in the public domain through official resources, so it is not recommended to use and download any software distributed through non-recommended sites. It is advisable to use only the built-in Play Market. Because otherwise, the possibility of downloading viruses to the device is not excluded, which will further complicate the use of the phone and the troubleshooting process.

Other ways

In order to deactivate the proximity sensor, you can use special codes that must be entered on virtual keyboard your smartphone. However, in practice, for each device, the user will need to independently find the desired combination, since they are unique and cannot be used on smartphones of all manufacturers and operating systems everywhere. To find similar digital parameters, it is advisable to use the search in the public domain, offering your own model of a mobile device.

For example, on many smartphones, a request is extremely common, which is represented by the sequence * # * # 0588 # * # * . Open the phone book section and enter the proposed code in the number field, then click on the call key. Despite the possibility of no effect, it is recommended to check several methods, starting from the simplest.

It is also important to note that in case of malfunctions caused by technical breakdowns, you should contact the workshop, since the possibility of more serious damage and failure of the entire mobile device cannot be ruled out.

It should be assumed that you have learned how to disable the proximity sensor using the Android mobile operating system as an example, so if you encounter any difficulties, you can use both the built-in functionality and a separate program or more unique methods. In other situations, you can turn to thematic forums to find out the cause and solve a problem that has not received significant publicity. You can also describe your own features of the problem or the reasons for the need to deactivate the function. automatic shutdown screen.

Our site has already talked about what is on smartphones and phones. Recall that this is an electronic device for registering the presence or absence of a certain class of objects in its coverage area. talking plain language, the sensor turns off the screen if the smartphone is brought to your ear or simply covered with your hand. This is done so that during a conversation it is not possible to accidentally press the touch keys.

In some cases, it is required to disable the proximity sensor. Can it be done? It is possible, but not all devices have such an item in the settings. For example, in Samsung smartphones there is. Let's show an example on it.

Go to "Settings".

Select the "Device" section, "Calls" subsection.

Uncheck the "Turn screen off during a call" checkbox.

After that, the proximity sensor will be disabled.

The second way is to use special applications. They do not require obtaining, however, they require administrator rights, so you use such an application only at your own peril and risk. Removing such applications can be confusing because you first need to disable administrator rights, and such rights are disabled in the settings of the application itself, after which it can be removed.

For example, you can use the Sanity app. It has a whole section called Proximity, which has a lot of settings for the proximity sensor.

As you can see, nothing complicated, but we strongly recommend using standard settings smartphone without installing third-party applications.