Enable the built-in Windows 8 antivirus. Disable Windows Defender
Windows Defender is standard application, which protects the computer system from Trojans and viruses that can be picked up on the Internet or when transferring files from a flash drive or other media. Usually it functions until another antivirus is downloaded, which will disable the standard protection without your intervention.
However, this does not always happen, and you may need to deactivate programs manually. This is necessary in situations where a standard antivirus program prevents you from installing a game or downloading a file. From this article you can understand how to disable Windows Defender in Windows 10 and Windows 8.1. It will also be described at the end how it can be turned back on if necessary.
There is nothing difficult in disabling a security program; even those people who have basic computer skills can cope with this task. It is enough to follow the instructions and not deviate from them.
First you need to go to the Control Panel. There are two ways to do this:
- Click on “Start” with the left mouse button and select the desired item.
- Move the cursor to the lower right corner of the screen, in the section that appears, select “Settings”, in which there will be a “Control Panel” item.
A window will appear in which all sorts of sections designed to personalize your computer will be presented. It is advisable to change the view type from “Categories” to “Large Icons” to make it easier to find the required function. Among all the items there will be “Windows Defender” - that’s what we need. You will need to click on it and pay attention to the pop-up window.
If a message appears saying that the application is not functioning and is not being monitored, then the defender has already been disabled either by you, by another user with access to your electronic device, or by an antivirus. In this case, you won't need to do anything.
How to turn off the defender in the modification of the eighth version “8.1” - a question that may be of interest to people who have this application activated and interferes with operation. The answer is much easier than in the case of the tenth version operating system.
First, you need to go to the Control Panel and click on the standard defender icon, select the “Settings” section and the “Administrator” subsection. If everything is done correctly, an item called “Enable application” should appear.
You need to uncheck it and click on the “Save Changes” button, but first make sure that such protection is really no longer needed. If a good antivirus program is not yet installed on your computer, it is not recommended to deactivate the built-in one, as this may cause serious problems with the system.
Disabling Defender in Windows 10
Method for deactivating built-in protection in 10 Windows versions much more difficult than in the eighth. However, it is quite doable, the main thing is to strictly follow the guide on how to disable Windows 10 Defender temporarily or permanently.
Having opened “Settings”, which is located at the top right, you will need to move the “Real-time protection” item from on to off. However, this option is only suitable for those people who only need to temporarily deactivate the standard defender. It will not work for about 15 minutes, and then will automatically turn on.
There are other, more complex methods that will help you disconnect forever. They should be used if this kind of protection is not required or is in the way.
Instructions for the first method:
Launch local editor group policy using the Win+R combination and enter gpedit.msc into it. After that, click on the “Ok” button.
Go to Device Configuration - Administrative Templates - Windows Components - Endpoint Protection. IN final version dozens may not have such a section. Therefore, its owners will need to go to Windows Defender, which also has functions to deactivate the built-in protection.
Find the Endpoint Protection item in the main editor window, open it and set it to Enabled. After that, click “Ok” and leave the editor.
If everything was done correctly, then the Widnovs defender will be disabled, about which you will immediately receive a notification in which you will be asked to launch the program.
Do not be afraid of the inscription that your computer is at risk, since it means practically nothing.
For the second method you will need to use the registry editor:
Having opened it, you need to select the section HKEY_LOCAL_MACHINE\ SOFTWARE\ Policies\ Microsoft\ Windows Defender. You need to make a DWORD parameter in it, which should be called DisableAntiSpyware, if it is not in the section. The main thing is to set it to 1 if the defender needs to be deactivated. If you want it to be on, then the number needs to be changed to 0.
After this, the program should not interfere with work, and you can safely install games or a new antivirus program.
How to activate Windows Defender
It may happen that you or a certain program has deactivated Defender, which can be understood from the corresponding pop-up window. If now for some reason you need to make it working, you can easily do this by clicking on the required notification in the Security Center. The question of how to enable Windows 10 Defender if it is disabled will no longer be relevant, since the system will do everything on its own. However, if you used the registry editor, you will need to do the reverse operation yourself.
How to enable Windows Defender 8.1 if it is disabled is also an easily resolved issue. You just need to go to the Support Center and view the messages that are there.
If they say that the standard anti-virus program is disabled, then you can activate it by clicking on “Enable now”. After this, everything should work without your intervention. If this does not happen, the system has probably crashed and should be restarted.
Windows Defender is a complete antivirus program that reliably protects your Personal Computer in real time. The service periodically checks all files for hard drives for infection, automatically removes viruses and puts infected data into quarantine mode. Quarantine allows you to disable the execution of malicious code while the utility searches for cleaning tools.
In addition, the program quickly checks all connected external data sources, preventing viruses from spreading throughout the operating system, and blocks attacks from the Internet. The software updates itself automatically.
Activation
On many installed OSes this utility is disabled by default. This is done to give users a choice: use built-in protection or rely on third-party developers.
You can also create a shortcut to the utility to quickly launch it, if for some reason you need to temporarily disable it. To do this, right-click on the program icon and in the drop-down context menu select the “Create Shortcut” action.
Immediately after switching on, it is recommended to scan everything hard disks full check. If you have USB drives, you can check them at the same time. The procedure time depends on the size and load of your disks, as well as the speed of your PC.
Deactivation
If you are not satisfied with the operation of this program, you can disable it. To do this, you need to follow steps 1-3 previous instructions, and deactivate protection against viruses and spyware. Immediately after this, it is strongly recommended to install another antivirus, since leaving your computer defenseless is extremely dangerous.
There are times when the antivirus needs to be turned off for a short time (for example, while installing some programs or to “hack” pirated software). In this case, there is no need to go into the security settings and completely complete the process. To do this, you just need to open Defender and go to the “Options” tab. Next, open the “Real time” section and uncheck the only option.
The Windows 8 OS version has a built-in antivirus, which was probably noticed by most users. If you are hearing about this for the first time, then this article will be useful for you. We'll look at ways to turn on and off an application designed to protect your computer from malware.
Enable Defender in Windows 8
You could have come across a similar utility before, but it had a name Microsoft Security Essentials. It could be downloaded from the developers’ website and installed on your computer yourself. Owners of Windows 8 devices are luckier. This program is initially installed in the system.
There is debate about its advantages and disadvantages. Some users find the antivirus quite reliable and turn it on for protection. Others prefer to use third party programs especially since there are different ones. The most popular ones are Kaspersky, Nod 32 and others, motivating their installation by the fact that they are more effective. If you want to try using Windows application Defender, then let's look at how to enable Windows Defender 8.
You can find this program if you use the search, in which we enter Windows Defender 8. After we have found the program, move the cursor over it and click on the right button. Select Create shortcut. Now there will be an icon on the desktop, clicking on which you can go to the application menu.
If you can't start Windows Defender, we'll use the Control Panel. If you don’t know how to open the Control Panel, you can find instructions here. Next, go to Control Panel and select System and Security. In it we are interested in the Support Center section. Next to the Security link there is an arrow that, when clicked, will open a list of options. Opposite them, click the Enable Now button.
After the completed manipulations, click on the program icon, after which it should start. The check here can be performed in quick, full or special mode. The Defender interface is quite simple. Updates are downloaded automatically. If you go to the Log tab, you can find data about malware, which were deleted by the antivirus. They can be permanently deleted or restored if the program accidentally deleted the necessary files.
Disable Windows Defender
In the case when you decide to use not the built-in antivirus, but from third-party developers, you will need to know how to disable Windows 8 Defender, since two programs with the same function will not coexist normally on your computer. The simplest and reliable way– application of a system service. In order to start the operation, go to the Control Panel.
Next, go to the System and Security section. Here you need to select the Administration tab. Double click on Services. In the list that opens, find the Service Windows Defender. Click on the label and go to properties. Opposite the Startup Type inscription, mark Disabled, and also click on Stop and confirm your actions by clicking OK.
Note! You should not change the settings of other services. Especially if you don't have much idea what they are for. This can lead to instability in the system, and sometimes to much larger problems that can completely destroy it, after which a reinstallation will be required.
To enable or disable Windows Defender, use the methods given above. But before you carry out any procedure, decide whether you need the work of a Defender or not. It is difficult to talk about its effectiveness, since this issue causes a lot of controversy among users. Although you shouldn’t completely leave your computer unprotected, especially if you go online. So if you haven’t installed a third-party antivirus, use the built-in Defender.
Hello, friends! In this article we will understand how to enable Windows Defender 8. We have already looked at antivirus. WITH Windows release 8, Microsoft abandoned the development of Microsoft Security Essentials and transferred all its functionality to Windows Defender 8. The latter comes bundled with the operating system. When installing third party antivirus agents the defender switches off. When you uninstall a third-party antivirus, it should turn on. Windows 8 Defender does not always turn on. And often such problems happen with computers or laptops with Windows 8 preinstalled. It is usually installed there trial version any antivirus, and the defender is disabled. We will discuss how to enable Windows Defender 8 below.
Opening the Help Center
Left-click on the icon in the notification area and click on the link Open support center
You can also open the Action Center by searching from the Start menu.
Open if necessary Security tab and press any button Enable now
Windows Defender 8 starts immediately for me. It may not be updated for you. Click Update, wait, and your virus protection works.
Using Windows Defender 8
Unlike Microsoft Security Essentials, Windows Defender 8 cannot configure the frequency and type of scan (full or quick). It seems to me that a quick check is performed every day when the computer is idle. The defender is also updated automatically. All we have to do is run when necessary:
- Special check (Selective) (for example or )
- Full scan (I run it when the computer is not working properly)
I have it enabled by default A basic level of participation in the program MAPS(Microsoft Active Protection Service). To more actively help Microsoft in the fight against malicious code, in Settings > MAPS, select Advanced Participation Level and click “Save Changes.”
For more reliability, on the “Parameters” tab in the “Details” section, I check two additional checkboxes:
- Check removable media;
So that during a full scan, all connected devices are immediately scanned and a restore point is created for a possible rollback
I don't include anything as an exception.
For convenience, you can pin Defender to the home screen (in). Open the Start menu, write “defender”. On the found element " windows defender» click right click and select " To Home screen»
Then we move the shortcut to a convenient place and Windows Defender 8 is always “at hand”.
Conclusion
In this article, we figured out how to enable Windows Defender 8, display it on the start screen and carry out checks if necessary. I will try to show everything written above in the video below.
If it doesn't work, then I would try again. If that still doesn't work, I'd try starting the Windows Defender service.
Windows 8 introduces many new ideas, two of which radically change the way you work with this operating system. One of the main innovations is start screen Metro, which is completely different from the familiar classic Windows 7 desktop. It is a dynamic web page consisting of mosaic tiles. To switch from Metro to the classic desktop, the user needs to click on one of the special “tiles”. At the same time, the second significant innovation of Windows 8 awaits users on the desktop - lack of the usual Start button. Such a radical innovation baffles even the most experienced users! Fortunately, this annoying misunderstanding can now be overcome.
No matter how surprising it may sound, it is a fact! Microsoft has gotten rid of one of the key personality traits of Windows - the famous Start button. This is done to further impose the new Metro graphical shell on users. Thus, the user is actually forced to launch applications through Metro, and old programs will not work on this graphical shell. Users will have to buy new versions of almost everything paid applications. Fortunately, there is a way out - There are two free programs, allowing you to enable the Start button in Windows 8. One of them is a very easy to use utility Power 8.
Method 1 - Enable Start Button in Windows 8 using "Power8"
Installing the Power 8 program does not cause any problems. All you need to do is run the installer, answer a few questions from the installation wizard, allow changes to be made on your computer, and wait a few seconds.
Once the installation is complete, a shortcut to the Power8 program will appear on the Metro desktop. Run it:
On the Windows 8 desktop, a small compact button will appear Start. Bottom left, exactly where it is located in Windows 7 and Windows XP:
Start button, which the Power8 program creates, is small and looks modest, but it calls up a full-fledged Windows start menu, in which you can search and launch programs, go to the main sections of the operating system - Control Panel, Network and others. You can also reboot, turn off or lock the computer:
It is important to note one point - the Power8 program is not added to the startup list. To button Start appeared every time I started it Windows 8 you need to configure it to autorun manually. To do this, simply click on the “Start” button with the right mouse button and enable the “Start at startup” menu item:
After this, every time you start the worker Windows desktop 8 you will see your usual favorite “Start” button.
It should be noted that, unlike some similar utilities, Power8 does not use any hacky methods to create a Start button. No changes are made system files, no non-standard branches are written to system partitions Windows registry. Power8 is a completely standard Windows application.
So that you don’t have to every time after Windows boot 8 manually launch the desktop, you can configure the system so that it opens automatically. Read how to do this in our review:
Method 2 - Classic Shell program for Windows 8
Classic Shell's capabilities extend far beyond the task of turning on the Start button. This is a powerful, feature-rich utility for fine-tuning desktop controls and many standard programs and Windows dialogs. In particular, it allows you to radically change the background color of the Windows main menu, called up by clicking the "Start" button, allows you to return the good old simple dialog asking you to overwrite files in case of a copying conflict, and much more. Perhaps, among other things, she can configure Windows 8 so that when the system boots, immediately after loading Metro, the classic Windows desktop automatically starts.
