Programs for constructing metal patterns. To help the engineer, designer, technologist (free programs). Key Features and Functions
A set of 7 small programs that do not require installation.
Allows you to export results to AutoCad.
All programs contain instructions for working with them.
1. DeW_LUJG Bent parts for general machine-building applications
The program is designed to calculate data sufficient for marking or drawing development and bending lines of bent parts for general machine-building applications, such as: angle, several types of channels, several types of staples, clamp, rectangular pipe, loop..., 12 parts in total. Provides background information on the total surface area and development mass for the selected part.
You can also create a file for any part to build a 2-D development model with bend lines in AutoCAD.
2. DeW_JW2P Cylindrical bend 2-link
The program is designed to calculate data sufficient for marking or drawing the development of a cylindrical 2-link bend.
- create a file for constructing a 2-D model of a branch development in AutoCAD:
3. DeW_JW3P Cylindrical 3-link bend
The program is designed to calculate data sufficient for marking or drawing the development of a cylindrical 3-link bend.
- text file the results of the allotment calculation.
4. DeW_JW4P Cylindrical 4-link bend
The program is designed to calculate data sufficient for marking or drawing the development of a cylindrical 4-link bend.
You can also use the program:
- create a file for constructing a 2-D model of a branch development in AutoCAD
- create a text file with the calculation results.
5. DeW_JW5P Cylindrical bend 5-link
The program is designed to calculate data sufficient for marking or drawing the development of a cylindrical 5-link bend.
You can also use the program
- create a file for constructing a 2-D model of a branch development in AutoCAD;
- text file with calculation results.
6. DeW_JGH Rectangular bend
The program is designed to calculate data sufficient for marking or drawing the development of a rectangular bend.
You can create a file for constructing a 2-D model of a bend in AutoCAD. You can also create a file with the results of the bend calculation.
7. DeW_GGZCRHCYGH Transition of a straight line from a circular section to a rectangular one
The program is designed to calculate data sufficient for marking or drawing the development of the transition of a straight line from a circular section to a rectangular one. The diameter of the circular section is not less than the diagonal of the rectangular section.
You can create:
- file for constructing a 2-D transition sweep model in AutoCAD;
- file with calculation results.
We are ready to post your examples of engineering calculations or programs you have written that may be useful for designers and technologists. Write to:
Library of technological equipment
The library of technological equipment is intended for drawing up technological plans. Works in ZWCad, AutoCAD LT, AutoCAD. Tested in versions prior to 2008. Should work in newer versions as well.
Installation and conditions are given in the archive.
Over 50 years of labor activity - 15 years were devoted to OJSC Izhmash, tool production (technological engineer - acting head of PTB), 30 years worked in design institutes Ipromashprom, Soyuzmashproekt, Promproekt, NIPIneft, Izhmashproekt in positions from st. engineer up to ch. technologist specialist. Worked as a chief specialist for 21 years (in 3 institutes).
*Usage free versions Products are subject to the terms of the end user license agreement included with your download.
Autodesk Freewheel
Autodesk Freewheel is a free web-based service for sharing and sharing 2D and 3D designs created in AutoCAD or other Autodesk applications.
DWF project files can be hosted on a free online service and can be easily accessed for interactive viewing and printing. There is no need to download additional software. This web service automatically generates unique encrypted URLs for uploaded project files. Thus, you can exchange not files, but links to them.
It is also possible to embed an interactive 3D project into your web page by copying a small piece of code into its text.
*Usage free services subject to the terms of their Terms of Use sections.
Autodesk DWF Writer
Autodesk DW Writer is a free program from Autodesk for secure exchange 2D and 3D data in DWF format. Allows the exchange of design data with a large territorial distribution of the team, ensuring efficiency collaboration. Among the main features of the program: tools for automatic publication of 2D and 3D files using output tools in DWF format, the ability to select the Autodesk DWF Writer module for SolidWorks 2006, CATIA V5 or Pro/ENGINEER Wildfire 2.0 to publish all design information from 3D models, the ability to publish from Microsoft applications.
Autodesk DWF Viewer
Autodesk® DWF™ Viewer is a small free application, which is used to exchange design data in electronic form. Designed specifically to work with DWF™ (Design Web Format™), the program allows you to view and print complex 2D and 3D drawings, maps and models.
DWG TrueView - dwg/dxf viewer from Autodesk
If one created a file, sooner or later the other will want to view or print this file.
It is clear that using the full-fledged application in which this file was created only for printing or viewing is not only inconvenient, but also expensive. Full-featured applications cost quite a lot of money...
So, free viewer dwg and dxf files from Autodesk - DWG TrueView
All it can do is show files of these types, display selected layers, print and publish their contents in dwf format. With such modest functionality, the DWG TrueView distribution weighs as much as 110 MB! Actually, the viewer itself takes up only ~300 kb. The rest of the volume will take full core AutoCAD for embedded solutions - Object DBX.
In other words, for all its shortcomings, DWG TrueView has one powerful advantage - it interprets dwg files and dxf through the AutoCAD core, which eliminates discrepancies when editing and viewing the same file.
*Use of free versions of products is subject to the terms and conditions included when downloading them license agreement with end users.
The free SketchUp Viewer is designed to view and print models created in SketchUp. Because SketchUp Viewer does not include tools for editing the model, it is much easier to use for people who are not familiar with SketchUp. Additionally, models viewed in SketchUp Viewer are protected from inadvertent modification, ensuring that your customers see exactly what you intended to show them.
A program for calculating and constructing diagrams of bending moments, transverse and longitudinal forces, displacements and reactions of supports in beams, flat and spatial frames. The finite element method (FEM) is used for the solution. The FEA processor is integrated into AutoCAD using VBA. The AutoCAD environment itself is used as a pre- and post-processor. That is, drawing a model and specifying forces, moments, distributed loads, support elements, as well as presenting calculation results occurs using AutoCAD. To facilitate the installation of forces and supports in the frame model, a set of buttons (flyMenu) has been developed. The KarkasA program only works in AutoCAD 2006, 2007, 2008, 2009 32-bit versions. The program has not yet been adapted for the AutoCAD 2009 64-bit version.
program: DeW_LUJG- Bent parts for general machine-building applications
The program is designed to calculate data sufficient for marking or drawing development and bending lines of bent parts for general machine-building applications, such as: angle, several types of channels, several types of staples, clamp, rectangular pipe, loop..., 12 parts in total. Provides background information on the surface area and mass of the reamer for the selected part. You can also create a file for any part to build a 2-D development model with bend lines in AutoCAD.
- DeW_NRJYCG Asymmetrical transition tee
The archive includes an exe file of the program, in unzipped form the volume is 360 kB. Download - DeW_NRJYCHG Asymmetrical equal bore oblique tee
The archive includes an exe file of the program, in unzipped form the volume is 280 kB. Download
The programs are designed to calculate data sufficient for marking or drawing a tee layout.
Using programs you can create:
- file for constructing a 2-D tee development model in AutoCAD;
- file with calculation results.
For programs to work, Microsoft must be installed on the user's computer. NET Framework 2.0 or later.
The programs are free. Selling or receiving financial compensation for distribution of programs is prohibited. The results of the programs are permitted for commercial use.
The programs are designed to calculate data sufficient for marking or drawing developments. You can also create a file to build a 2-D flat pattern model in AutoCAD.
The functionality of the programs was tested on a computer with installed Windows XP and AutoCAD 2005.
Each archive includes:
- exe file of the program;
- txt file for setting up the program;
- a file describing the operation of the program.
When unzipped, the total volume of each archive is 0.5-0.6 MB.
- Rectangular umbrella from one part (You can also create a file for constructing in AutoCAD a 2-D model of three types of umbrella development:
- without allowances: the umbrella is supposed to be manufactured by welding;
- with allowances for the fold: it is assumed that the umbrella will be made using a fold;
- with allowances for the fold and for rolling up the wire: it is supposed to make an umbrella using a fold and roll the wire around the perimeter of the umbrella to tighten its edges.) - Transition of an oblique from a rectangular section to a rectangular one
program: Calculator DeW_HVLBDN26020Gh3
The program is designed to calculate the minimum length and height of text (font Pr3 GOST26.020) applied using flat-panel printing. For letters of the Greek alphabet, Roman numerals, mathematical symbols, degrees (fractions, indices), the entry of which is difficult or impossible using a computer keyboard, a program keyboard has been developed.
When entering the program using the keyboard, a message appears indicating what replacement characters were entered. If it is necessary to recalculate the length of text already entered by the user for a different font height, the program provides corresponding buttons.
rectangular bend
The program is designed to calculate data sufficient for marking or drawing the development of a rectangular bend. You can create a file for constructing a 2-D model of a bend in AutoCAD. You can also create a file with the results of the bend calculation. The archive includes an exe file of the program, in unzipped form the volume is 228 kB. For the program to work, Microsoft.NET Framework 2.0 or a later version must be installed on the user's computer.
Name: GeoHelp
Brief description: The program is designed to calculate the geometric parameters of plane sections and bodies.
Parameters can be calculated from several different source data (More detailed description in the file Info_GeoHelp.txt)
There is also a built-in string calculator (the result is displayed when you enter a symbol in the line)
System requirements: Requires installation of Framework 2.0!
ACEditor - external multiline text editor for AutoCAD (as well as all products based on the IntelliCAD core: BricsCAD, ZwCAD, etc.)
The "AKiR" program (Analysis of Kinematics and Performance) is designed to synthesize the kinematic diagram of flat lever mechanisms, both simple and complex mechanical systems. The main capabilities are performance analysis (mobility is equal to one), analysis of connecting rod curves of flat lever mechanisms, kinematic analysis (displacement, speed, acceleration of an arbitrary link), optimization of the mechanism diagram according to kinematic parameters.
The prototype was the TMM program (author S. Ruev).
Program OtkloneniiaRazmerov is intended to show the permissible deviations in the dimensions of parts in the hole system.
Tolerance fields are not all that are in GOST(e). But everyone is not needed, as the experience of working at the design and engineering institute of heavy engineering shows. The program is very simple and does not need any explanation. Enter the size, click the button for the corresponding tolerance field and read the value of the permissible deviation in the corresponding text box. Deviations correspond to GOST. The program was created in Visual Basic 6.
Drawing template "Drawing according to GOST" for setting the default ISOSPEUR font when creating a document for Autodesk Inventor 10
- Notification generator - Issue of single and sets ("fractional") change notices (AI) in accordance with GOST 2.503-90.
- Tacad- Frames A4, A3 ESKD with title blocks for Autodesk AutoCAD 2002 and higher with a program for inserting and filling them, both in paper space and in model space.
- Designation recorder - Automation of ordinal assignment registration number designations of products and their design documents in accordance with GOST 2.201-80, as well as software systems and components in accordance with GOST 19.103-77 and provides:
- automated assignment of a serial registration number;
- viewing the register of registered designations;
- ability to view the ESKD Classifier;
- collective use.
The description of the program provides recommendations for preserving the register of designations. For the program to work, the operating system must be installed on the computer. Microsoft system Windows XP SP1/SP2 or other (with Microsoft .NET Framework). (138Kb, packed in ZIP archive)
- List generator- Quickly obtain single and group (GOST 2.113-75) lists and specifications from SCH and PCB files P-CAD 2001—2004
- Taip- Frames A4, A3 ESKD with main inscriptions for Autodesk Inventor 9 with a program for inserting and filling them. Version 1.20 added work with technical requirements. (370Kb, packed in ZIP archive)
- pcad2ai- Creating a three-dimensional model of a printed circuit assembly from a PCB file in Autodesk Inventor 9/10.
The program provides:
- creation of a three-dimensional model printed circuit board any configuration;
- automatic stitching of ends of board contour lines that do not match in the PCB file;
- growing any number of components on both sides of the board in the form of parallelepipeds;
- the ability to select holes and components to display in the board model;
- work with any quantity open files PCB.
Cone Layout is a specialized program for creating the development of a truncated cone. It will be useful for welders, engineers, auto mechanics and anyone who works with metal cutting. For ease of use, the program displays a rotating three-dimensional model with dimensions.
The flat projection can be printed on a printer or plotter to be used as a template for cutting out shapes from metal plates. Or it is possible to export it to AutoCAD DXF format for use on CNC machines program controlled(CNC). Cone Layout can also save in Encapsulated PostScript (EPS) format or save coordinates in plain text format.
Thanks to the cost minimization function, the program optimizes the amount of material used, the seams along which cutting will take place, and the smallest piece of material on which the projection can be placed will be used to construct the development.
The program was originally developed to design a racing motorcycle exhaust pipe. Now it is used for completely different purposes: the creation of biomechanical manipulators, paper aircraft models, historical reenactors to create copies of medieval helmets, cone stands for jewelry displays, metal rockets, exhaust pipes for choppers and much more.
Key Features and Functions
- optimization of material use;
- support large quantity units of measurement: meters, inches, feet, yards, radians, degrees, grads, minutes, points;
- export to AutoCAD DXF, Encapsulated PostScript EPS and TXT;
- the ability to print large layouts on multiple pages;
- detailed help system.
