What does cellular network activation failure mean? What to do if iPhone or iPad activation fails. Manual way to activate the Internet

If your mobile Internet does not work on your iPhone, you constantly have to search for open point Wi-Fi to connect to the Internet. There is little pleasant in this situation, so if any problems occur, you need to determine the source of the problem as soon as possible and try to eliminate it.

Causes of problems

Before you begin troubleshooting, you need to determine why mobile Internet does not work on your iPhone. It can be difficult to understand the exact reason right away, so you have to use the method of elimination. Possible reasons include:

• incorrect communication parameters;
• iOS software glitch;
• lack of network coverage;
• problems on the side of the mobile operator;
• problems with the communication module;
• SIM card damage.

Another reason why mobile Internet does not work on an iPhone is the consumption of traffic and the lack of money on the balance to connect additional package. Before complaining about other factors, you need to make sure that you do not have any problems with traffic and money.

Checking the connection

First of all, make sure that the mobile Internet is turned on. For this:

1. Open iOS settings.
2. Go to the section " cellular».
3. Move the Cellular Data slider to the On position if it was turned off.

You can also manage cellular data through the Control Center. If the icon is gray, it means there is no connection. Click on it to turn on mobile internet.

Also, make sure that airplane mode is turned off on your smartphone. When activated, all communication modules on the device stop working, so you can’t use calls, messages, or the mobile Internet.

Network reboot

If the cause of the problem is a system malfunction, a reset will help fix it. network settings. It is convenient because when it is executed, user files and settings are not deleted from the phone, that is, there is no need to do backup copy iOS. The only thing that will have to be configured again after the reset is the APN parameters for connection mobile internet.

To reset network settings:

1. Open iOS settings.
2. Go to the "Basic" section.
3. Select Reset.
4. Click Reset Network Settings.

After completing the reset procedure, problems with the Internet should be resolved. However, the mobile network will not work until you add the APN details again.

Connection setup

Typically, the connection configuration is added to the phone when it is turned on for the first time. If you reset your network settings, you will have to order APN data from your operator again or enter it manually in the settings.

Beeline Internet problems

If, after resetting the network settings, mobile Internet from Beeline on iPhone does not work, follow these steps:

1. Open settings.
2. Go to the Cellular Data section.
3. Go to Cellular Data Settings.
4. Click APN Settings.

Each operator has its own APN parameters. You can view them on the official website of the cellular provider. For Beeline you need to enter the following settings:

• APN - internet.beeline.ru.
• Username and password - beeline.

There are not many differences between other operators. For example, MTS uses APN internet.mts.ru with the username and password mts. In addition, if you have problems with the mobile Internet, you can call the operator’s support service - for Beeline subscribers it works at 0611. From the support service you can order mobile Internet settings, which will come in a configuration message.

System failures

It is important that the correct operator is selected in the settings, otherwise the iPhone will not receive a signal. For convenience, it is recommended to enable automatic detection provider. If your phone connects to the wrong operator, configure this setting manually.

Affect the stability of the connection and system errors. For example, when installing wrong date In the settings, the phone may stop catching the network. System crashes can often be resolved by simply rebooting the device. As a last resort, you have to resort to a hard reboot and reset.

Hardware faults

The most unpleasant problem that an iPhone owner may encounter is damage to the communication module. If a broken SIM card can be replaced quickly and free of charge in the office mobile operator, then repairing or installing a new module will cost much more.

A failure of the communication module is characterized by the absence of an operator signal. Communication may be lost for the following reasons:

• damage to the transmitter power amplifier;
• antenna failure;
• failure of the SIM card holder or connector;
• damage to the radio path.

Open the iOS settings and see if there is a “Modem Firmware” item in them. Its absence indicates that the transmitter power amplifier is broken. Unfortunately, not all hardware problems are so easy to detect. To diagnose damage to the radio path, you must contact a service center. The cause of the problem may be a faulty lower cable. The problem can only be fixed at a service center by replacing the damaged component.

If the iPhone is constantly searching for a network, you should pay attention to the condition of the antenna. It may fail after the smartphone is dropped, subjected to a strong impact, or comes into contact with moisture.

There are many reasons why you might see a “Could not activate iPhone” or “Could not activate iPhone” error when trying to set up your iPhone. In this tutorial we will look at the causes of activation error and possible ways error fixes that will help you set up your iPhone

Apparently, many people are having difficulty activating their new iPhone X, so if you've encountered this error, know that you're not alone.

But activation issues are not limited to the iPhone X. There have been issues with people being unable to activate their iPhone after updating to iOS 11. Although this issue mainly affects the iPhone 5S or earlier.

How to fix the “Unable to activate iPhone” error

There are many other reasons why you might not be able to activate your iPhone, and we'll list them below, along with a number of fixes that should allow you to activate your iPhone. Next, we will talk about possible ways to fix the “Unable to activate iPhone” error.

Reasons why you can't activate your iPhone

Activation lock set

You may have trouble activating if the iPhone you're using is still linked to a different account iCloud recordings with activation lock. Next, we will look at the solution to how to fix the “Unable to activate iPhone” error in this situation when starting the smartphone.

Your operator may have a problem

In the case of iPhone X activation issues, they seemed to be mostly limited to AT&T and Verizon customers in the US.

The activation server may be unavailable

The Apple server that verifies that your device can be activated may be down or experiencing a high volume of traffic. You can check if the Apple server is located here LINK https://www.apple.com/support/systemstatus/.

Your SIM card may not be supported

The SIM card in your device may not work with iPhone.

Activation could not be completed

There may be problems connecting to the Internet or iPhone.

How to fix iPhone activation errors

Make sure your iPhone has a SIM card

You cannot activate an iPhone without a SIM card. Find out more about it here: How to set up iPhone without SIM card.

wait a bit

It is possible that the servers at Apple are busy (especially if there are new iPhone or update for iOS). Check server status Apple activation by visiting the status page Apple systems Here. LINK https://www.apple.com/support/systemstatus/

Remove the SIM card and reinsert it

It is possible that the SIM card is not seated in the SIM tray correctly, so insert it and check if this has changed. Now let's move on to other ways to fix the “Unable to activate iPhone” error.

Reset your iPhone
How you reset or reset your iPhone depends on the model. With older iPhone models, you can hold the Home and Sleep/Wake buttons together for about 10 seconds. With the iPhone 7 and 8, the process is different in that the Home button is a sensor that depends on the system and if the software is functioning then the button does its job, so to speak. And with the iPhone X, the process is different because there is no Home button.

Unlocking the lock
The purpose of Activation Lock is to keep your iPhone and the data on it safe if your iPhone is stolen.

If the phone you're trying to activate has an activation lock, it may still be locked by a previous user (perhaps a used model). To disable Activation Lock, you will need to enter the ID and Apple password previous user or ask them to go into Find My iPhone and remove that iPhone from their account iCloud. Alternatively, you can call AppleCare or go to an Apple Store and as long as you can provide proof of ownership and Apple can confirm it's your iPhone, they can remove Activation Lock for you.

Make sure you don't have a locked iPhone
If your iPhone is locked to a specific mobile network, you will not be able to use a SIM card from another network. The previous network must unlock your iPhone so you can use it with the new carrier's SIM card.

Check if your WiFi network is working

Try an alternative Wi-Fi network if you can block Apple's servers from being blocked (if you don't have WiFi networks, connect iPhone to your Mac or PC and use iTunes, see next step).

Try activating your iPhone through iTunes

Below are the steps you should take if you want to try activating your iPhone through iTunes:

• Make sure iTunes is up to date.
• Turn off your iPhone and connect it to your computer via a USB cable.
• Turn on your iPhone and it should launch iTunes to open (or open iTunes if it doesn't).
• Once iTunes detects your iPhone, it will ask you to follow several steps to activate your iPhone.
• If it doesn't happen automatically, select your device in the left pane and you should see how to activate your iPhone.
• Sign in to your Apple ID and click Continue.
• Call your carrier

If none of the above resolves the issue, please contact your retailer for advice. And if they can't solve the problem...

Contact Apple

There may be a bug in your iPhone that is preventing you from activating it. Apple should be able to help or replace the iPhone if it's faulty and still under warranty. In this case, contact support.

conclusions

We hope you understand the possible ways to fix the “Unable to activate iPhone” error. If you know other solutions to this error, please write about them in the comment form.

Hello everyone! Mistakes are always unpleasant. And unusual errors are doubly unpleasant. Tell me, is it clear what it means when the message “PDP Authentication Error” appears immediately after installation? SIM cards on iPhone or iPad? Some kind of continuous set of words - PDP, authentication... Apple, that's enough, stop there already! :)

When I first encountered this problem, I was very puzzled. The SIM card is new and just purchased, the iPad also functions as it should - but when you combine these two variables, you get a “PDP authentication error” and the absence of any mobile Internet. Fortunately, you can fix all this yourself and without visiting a service center. How? Now I’ll tell you everything, let’s go!

So what do we see on iPhone screen or iPad besides PDP error? That's right, it says "activation failed" cellular network" This means that there can be three reasons for all this disgrace:

1. iOS settings.
2. SIM card.
3. "Iron" breakdowns.

We will not consider hardware, since hardware problems have slightly different symptoms - a complete absence of a network (and not just the Internet), a different fault text, etc.

But let’s pay closer attention to the first two points. So, what can you do to resolve the “PDP authentication error”:

As you can see, there are plenty of ways and there is nothing difficult - it’s worth trying to do absolutely everything.

I want to focus on the last solution, since in my case this was the reason for the authentication failure. It would seem that there is nothing complicated - go and change your SIM. But it was not there…

So let's insert new SIM card on iPad - we get a crash. We insert it into the iPhone - it works. We install another SIM in the iPad - everything works. Conclusion? The card is faulty. We go to the salon and change it. We insert it again - again an error.

In general, in order not to tell you all my adventures, I’ll go straight to the summary:

The PDP error disappeared after 3(!) SIM card replacements.

Like this interesting story. Fortunately, a cell phone store is nearby :)

After all this, I made a conclusion for myself - when buying a SIM card, immediately check its functionality (and preferably before paying). Because replacing a card, although free, is still not a very exciting procedure. And if you use this service several times a day, it becomes completely sad.

P.S. As always, I look forward to your comments - tell us about your case, ask questions, advise alternative solution Problems. Write!

After manipulations with iPhone firmware or its hardware, there are often cases when the iPhone does not see the network. There can be many reasons for this problem, but one of the most common is a failure in the current date and time zone settings. Today we will look at the main ways to solve this problem.

After flashing iOS or replacing the SIM card, it happens that the iPhone writes “no network”. In place of the operator’s logo is the inscription “No network”. This situation immediately reduces the capabilities of the device and actually turns it into a player. Often, users take the device to a service center, where additional fee They are trying to get the connection back, although in most situations the problem when the network on the iPhone is lost can be solved on your own.

The secret lies in the operating features of iOS itself. The iPhone does not connect to the network if the time zone and date/time do not match the current indicators. It is very easy to correct the situation using easy connection smartphone to Wi-Fi networks and performing a number of simple manipulations.

Correction of time to restore access to the cellular network

As you can see, the method is very simple and at the same time quite effective. However, you definitely need to be connected to a Wi-Fi network in order for your iPhone to register with Apple's server. Otherwise, cellular communication will not come to life.

What to do if there is no wireless access point nearby?

In this case, the most simple solution will creating Wi-Fi network using another iPhone that can connect to the mobile Internet and distribute a wireless network. It's quite simple to do this:

After these manipulations, a new item will appear in the main settings menu - Modem Mode. After its activation, the device will begin to “distribute” the Internet.

If this method is not available (the message “search for network” remains on the iPhone), then all that remains is to restore the iOS firmware.

First you will have to download the firmware file, connect the smartphone to the computer with installed iTunes. In the application, select Restore.

It is important to remember that the recovery procedure will delete all personal data and settings from mobile device.

If even after these manipulations the iPhone does not connect to the network, then the problems may be related to the hardware of the device and you will no longer be able to do without a trip to the service center.

Unfortunately, today even owners of phones such as IPhone are faced with problems. The most common problem is that the name of a specific operator is missing, and the phone itself is not.

This occurs due to reinstallation of the phone, long-term inactivity of the phone, or its direct repair. Experts cite an indefinite time and time zone in particular as a more detailed reason for this.

This article will help solve this problem. So, in order for you to be able to activate your cell phone IPhone network read further our article.

Causes of the problem

There are several more reasons for the problem on the iPhone. We will look at them further in the list. So, if you were unable to activate the cellular network, then this is due to the following reason::

• Internet access is limited. That is, the phone cannot reach the Internet via mobile Internet or Wi-Fi;
• Telephone iPhone device cannot gain access to a program called "Safari";
• Can't use email in electronic format. But subject to cellular network;
• The device cannot connect to the 3G Internet system;
• Or it says on the phone that the phone cannot activate the connection.

This is often the disadvantage of the phone if it was not possible to activate the cellular network. Before you move on to fixing any problem, you need to determine what type it is. After all, each problem brings with it a different solution.

Therefore, it is necessary to find the cause of the breakdown, and only then fix the problem. Further in the article we will look at the most common problems and their solutions so that all IPhone owners can activate the cellular network.

Troubleshooting solutions

As you already understand, there is only a large number of various reasons for this problem. Below is the problem and how to fix it.

If there is no network on the IPhone for unknown reasons, then you need to take the following steps to fix the problem. First of all, you need to turn on the “Airplane” mode for a short time.

This will also help ensure that the network begins to operate stably. Experts also advise making sure that the operator’s card itself is original. Moreover, it is necessary to inspect it, because it is quite possible that it is damaged. After this, you need to turn on the phone and again work with the mode called “Airplane”. That is, it must be turned on and off several times.

In the same case, if nothing helps, but you tried really hard, then it becomes necessary to check the operator settings specific network. To do this, you need to connect to Wi-Fi and go to a specific iPhone function.

This function has a name in the form “About this device”. There are cases when the device cannot connect to the Internet; for this you need to use a standard program for all IPhones.

The second common problem and its solution

The second problem is that after the so-called factory unlock, the network disappears. Next, we will provide a solution to this problem from people who posted their problem on the forums and then found a solution to it. Read carefully and don't miss anything.

Undoubtedly, this problem most often plagues people who own an iPhone. It often occurs after the so-called unlocking of the phone using special program for this phone model. If you are facing exactly this problem, then next paragraph for you.

First of all, it is worth noting that this error It has absolutely nothing to do with the phone unlocking procedure. And this problem is not at all as terrible as the previous one.

If the network is unavailable, this indicates that the device itself has accepted the operator’s card, but for unknown reasons cannot find the network. The most common way to solve this problem is to simply reset all network settings. Moreover this method is also the most effective. Every person who has this phone will understand this simple action.

Problem #3

The problem is network unavailability. It usually occurs after activating or deactivating your mobile device using standard programs iPhone phone.

So, let's look at a method that works 90 percent of the time. This method is quite long, so you need to carefully follow the sequence:

• You need to insert an operator card and connect to a program called iTunes. The connection must be made exclusively via a USB cable;
• Next, you need to wait until the process of restoring your phone is completed. After completion, you will be presented with two immediate options from this program;
• Next, you need to click continue recovery;
• After this, you need to select the item called “use IPhone as a new phone”;
• Next, the system will prompt you to complete activation. To implement this function, you just need to use your operator card and wait until the signal appears;
• If everything you have done does not help you, we recommend that you repeat points 1,2,3,4.
  It also happens that a person who has little experience cuts the operator’s card so that it fits in his smartphone. And at the same time he makes the mistake of cutting off more than necessary.

To fix the problem, you need to order a normal card from your direct provider. Also, quite often a certain provider may not provide services in your area of ​​residence.

In order to fix the error “Could not activate the cellular network. You are not subscribed to a cellular network service” on your IPhone, you usually just need to re-activate your operator’s mobile Internet. In this article we will show you exactly how to do this for the most popular cellular networks.

How to fix the error for the MTS operator on iPhone?

• Through dialing. Type a short command *111*18# and press the call button.
• Via sending SMS. Send SMS to the number 111 with text: 2122

• Go to and press the button "Reset". Then re-enter the cellular network data for MTS:
  • APN: internet.mts.ru
  • Username: mts
  • Password: mts

How to fix error for Megafon operator on iPhone?

• Through dialing. Call the number 0500 to get automatic Internet settings.
• Via sending SMS. Send SMS with text 1 to the number 5049 .

• Go to and press the button "Reset". Then re-enter your cellular network data for Megafon
  • APN: internet
  • Username: gdata
  • Password: gdata

How to fix an error for the Beeline operator on iPhone?

Automatic Internet activation method:

• Through dialing. Call the number 0880 to obtain automatic Internet settings for Beeline.

Manual way to activate the Internet:

• Go to "Settings - General - Network - Cellular data network" and press the button "Reset". Then re-enter your cellular network data for Beeline:
  • APN: internet.beeline.ru
  • Username: beeline
  • Password: beeline

How to fix the error for the Tele2 operator on iPhone?

Automatic Internet activation method:

• Through dialing. Call the number 679 to receive automatic Tele2 Internet settings.

Manual way to activate the Internet:

• Go to "Settings - General - Network - Cellular data network" and press the button "Reset". Then re-enter your cellular network data for Tele2:
  • APN: internet.tele2.ru
  • Username: no need to enter
  • Password: no need to enter

Finding yourself “in your hands” with an iPhone that does not catch the network on any trip or business trip is not a pleasant situation. The boss will be annoyed that his employee is unavailable and did not submit a timely report, relatives will be worried, potential clients will be off the hook. It will be impossible to even call help or a taxi if something happens to the car. It must be admitted that modern man is heavily dependent on the GSM signal.

Fortunately, in most situations the problem can be solved weak network on iPhone you can do it yourself and quite quickly. In this article we will talk about common reasons why an Apple gadget has poor network reception and ways to correct the situation.

First, what you need to check on an iPhone that does not receive a GSM signal - date/time settings. If the settings are incorrect, you should set the correct ones manually. This is done like this:

Step 1. Follow the path " Settings» - « Basic» - « date and time».

Step 2. find out exact time in your time zone. To do this, you can use, for example, the Yandex. Time" .

Step 3. While spinning the reels, set the correct date, hour and minute.

Step 4. Restart your iPhone and check the network.

If you have access to Wi-Fi, you can avoid manual settings time. In the “Date and Time” subsection there is an “Automatic” slider. After activating it, the iPhone independently determines the time in the set time zone - but only if the gadget is connected to the Internet.

Your humble servant prefers not to use automatic tuning time, because his iPhone “counts” an hour too late.

Problems with mobile operator settings

If the time is set correctly, but the iPhone still does not receive the network, you can suspect that the settings of the cellular operator have gone wrong. A set of such measures will help solve this problem (each subsequent step should be performed only if the previous one did not produce results):

Step 1. Turn airplane mode on and off. The corresponding slider is located at the very beginning of the menu “ Settings».

Step 2. IN " Settings"go to the section " Operator" and deactivate the toggle switch " Automatically».

Step 3. Check if the cellular data settings (APN, username, password) are entered correctly. Follow the path " Settings» - « cellular» - « Cellular data network" In the block " Cellular data» and the necessary details are present.

You will find the correct settings for the 3 leading operators in our article on how to set up the Internet on an iPhone. If there is a discrepancy, change the cellular data settings on your Apple gadget manually. After changing the settings, be sure to restart your device.

Weak GSM signal

If the reason weak signal The problem is that the user's location is not within the GSM coverage area; you cannot fix the problem yourself. You will have to buy a SIM card for temporary use. Although in fact the territory where absolutely There is no GSM signal, you need to look again.

There are areas where the signal is very poor in large cities. As a rule, iPhones are not detected in the subway, basements, or elevators. The network may disappear inside the building due to the fact that the concrete walls of the room jam the GSM signal. Some buildings deliberately use “jammer” devices to prevent employees from excessive Internet surfing. The jammers look something like this:

Previously, “jammers” were readily placed in educational institutions. Now the use of such devices has been reduced to a minimum - the modern educational process requires the student to actively access the mobile Internet.

If the GSM signal is weak in the user's home, this is a reason to file a claim with the communication provider. The owner of the iPhone needs to call the number hotline and complain about the lack of network. The application will be transferred to the technical department, whose employees will make every effort to resolve the problem.

SIM card is damaged

Mechanical damage to the SIM card or its incorrect cutting can not become the reasons why there is no network on the iPhone. If the card is faulty, the SIM gadget will not recognize it at all. This is a completely different problem possible solutions which we proposed in the article “Why the iPhone doesn’t see the SIM card.”

However, a user suffering from a lack of network on a smartphone should still conduct a visual inspection of the SIM card. If there is dirt on the contacts, you need to carefully remove it. Even the fact that the user removed the SIM card and installed it back in the slot can help restore a normal GSM signal.

If the owner of an iPhone has suspicions that the gadget has poor network reception due to the SIM card, he should contact the service office with a passport and have the SIM replaced. This procedure is free and only takes a couple of minutes.

iOS crash

The failure of the above measures tells the user that the problem may be software. For the gadget to work correctly, you need Latest updates systems. To check if there are any updates available, the user needs to follow the path “ Settings» - « Basic» - « Software Update».

The gadget has broken down

If there is a physical breakdown of the iPhone, a visit to the specialists cannot be avoided. As a rule, a gadget’s failure to catch the network is caused by a malfunction of the antenna module. A broken antenna is the result of a fall or flooding of the gadget. The cost of repair in this case will depend on the iPhone model. Let's put together the approximate prices in a table:

Repair price

iPhone does not connect to the network after unlocking: what to do?

Network problems may appear after the user has unlocked the Sim-Lock device using one of the following programs: redsnOw, ultrasnOw, SAM Tool, SAMPrefs. The following measures will help resolve the problem:

Step 1. Reset your network settings. To do this you need to follow the path “ Settings» - « Basic» - « Reset", click on the item " Reset network settings" and enter the password.

This measure will not lead to the deletion of personal data.

Step 2. Restore your iPhone via iTunes and set it up like new. The likelihood that this measure will help is 90%. Remember that restoring clears the device's memory. Before you begin the recovery procedure, make a backup copy of your data.

If the gadget is locked to AT&T, it will not work with Russian SIM cards, no matter what efforts the user makes. The unfortunate owner of such a smartphone is better off seeking an official unlock.

Conclusion

If there is no network on your iPhone, there is no need to rush to the experts for repairs. Specialists service centers are interested in finding a fault in the gadget - and they will most likely find it, “making a mountain out of a mountain.” Before sending the phone in for repair, the user should take a number of simple measures - check the time, network settings, reboot the gadget, update iOS. The chance that one of these measures will produce results is very high.

If you don't know yet, how to set up internet on iPhone, then be sure to read these instructions. Of course, a lot depends on the mobile operator, which can automatically activate the Internet settings on the iPhone; in this case, just open the standard one, enter the address of any site and check the Internet. If the pages load in the browser, then everything is fine, say thank you to your operator and start surfing the web.

But what to do if the phone does not connect to the network on its own, the answer is to continue reading how to set up the Internet on an iPhone and prepare to enter the settings manually:

Let's go to Settings– Basic– Net– Cellular data network

Internet settings on iPhone with iOS 10

In the first example, Internet settings were shown using old examples iOS versions. In order to enable the Internet on an iPhone with more recent firmware (for example, iOS 10), do the following. If you don’t have a SIM card yet, then purchase a SIM card, having previously decided on a more suitable one tariff plan. Immediately take a brochure with the settings from the seller. .

Now go to the Settings application and select – Cellular – Data settings

Next, select – Cellular data network, and register all APNs (and, if necessary, other sections). The example above shows the settings of the Tele2 operator; you need to enter the settings of your operator.

We make settings for the Internet, which you can find out from your cellular operator or search in the existing list given in the archive below. The fields should be filled in small, in English letters, as in the examples given:

MTS
APN: internet.mts.ru
Username: mts
Password: mts

Beeline
APN: internet.beeline.ru
Username: beeline
Password: beeline

Megaphone
APN: internet
Username: empty
Password: empty

Tele2
APN: internet.tele2.ru
Username: empty
Password: empty

You can find your operator's settings in

How to enable or disable mobile internet on iPhone

Enabling and disabling mobile Internet in iOS is done as follows: Settings – Cellular communications – Cellular data. To save traffic and battery power, turn off Cellular data when you are not using the Internet.

We considered how to set up Internet on iPhone using mobile GPRS Internet as an example. But there is another way to connect the Internet to the iPhone - since the phone is equipped with a Wi-Fi module, it is possible to use a Wi-Fi access point, which can be organized at home or use public access points. In large cities, wireless Internet access points are widely developed, so while sitting over a glass of beer in a pub, you can also surf the Internet, check your email or check the weather. To connect via wireless network Wi-Fi needs to be logged in Settings– WiFi and activate the marker, after searching, select one of the found networks.

The disadvantage of connecting via Wi-Fi is that the iPhone is tied to a specific access point; if you move a certain distance away from it, the connection is lost. Mobile GPRS Internet is more convenient in this regard; the Internet works within the cellular coverage area.

If you are interested in high-speed Internet in Apple iPhone and you have already completed the steps above, then look at “ ” and speed up.