What is backup on Android. Creating a complete backup of your Android device. Google Cloud Service

Backup or backup allows you to make a copy of all data from the device’s hard drive, which can be restored if damaged. Backup is most often done for computers, but today we will look at options on how to make a full backup of the system firmware on Android.

You can create a backup copy for an Android device in several ways: using a computer, using special applications, using services built into the device.

Recovery is a special program, different from regular applications for the Android system, that creates backup copies and then allows you to roll back to them. Stock recovery is installed on devices initially when they are purchased. This type of backup is performed only if you have root rights to the device.

You can install custom recovery yourself. The latter allow you to perform more different actions, and therefore are popular. The most common of them are: TWRP (Team Win Recovery Project) and CWM (ClockworkMod). Next, you will see how to install backup on Android through recovery.

CWM

ClockworkMod is an older program that has less functionality compared to TWRP. You can replace the stock recovery with it (if it is not already installed as the main one) using the ROM Manager utility in the “Setup recovery” section. One of the features of CWM is the control of only “hard” buttons, i.e., volume control and power buttons, which all Android phones and tablets have.

Algorithm for creating a backup using CWM:

1. The phone charge should be at least 60%, and preferably 100%.
2. Free up 500 MB or more of free space.
3. Turn off, wait about a minute.
4. Press and hold the power button and “-” or “+”, depending on the phone model.
5. When the upside-down Android icon appears, briefly press the power button and the opposite volume control button to go to the menu.
6. In the menu that appears, use the “-” or “+” buttons to select the “backup and restore” section, and confirm the selection with the power button
7. In the next menu, select and click “Backup” in the same way
8. All! Within 10–15 minutes, a backup of the firmware and all files will be created on your phone.

How to make a backup on Android without applications? Use the same algorithm, since often installed recoveries have similar menus, as well as control methods. In this case, you do not have to get root access.

If this option seems too inconvenient or you need a backup copy of only part of the data, then below you will read how to make an Android backup using TWRP recovery.

TWRP

TWRP (Team Win Recovery Project) is a more advanced utility for the Android system that allows you to use the touchpad and has an almost complete set of functions for working with file storage, software and the operating system. For example, you can back up only selected files. TWRP has a more convenient menu compared to CWM.

To install TWRP, you will need one of the special applications, such as GooManager. In the program menu you need to select “Install OpenRecovery Script”. Then, using the same program, click “Reboot Recovery” and get to the TWRP menu.

IMPORTANT. It is worth noting that the Android device must also have a high battery level and free storage space.

Click “Backup” and select the required partitions. We swipe across the part of the screen highlighted at the bottom, and the program begins creating a copy for the Android system. After a few minutes, click “Reboot system”. The copy is ready.

Using a PC

Obtaining root access, and at the same time mastering various applications, can be difficult for the user, while making a backup of Android firmware on a computer will be much easier for someone than with TWRP. Moreover, you don’t have to download any additional applications for the device.

All you need for this:

1. Enabled USB debugging on the Android device (you can do this from the settings).
2. Install ADB RUN for your computer, download it for free.
3. PC drivers, which are often installed automatically, and a USB cable.

Algorithm of actions:

1. We connect the phone to the computer and launch the ADB program.
2. Select Backup in the window that opens.
3. Next, select the first item in the new menu.
4. On your Android device, click “Back up data.” You are also prompted to create a password, but this action is optional.

A copy has been created for you to use if necessary!

Here we discussed the main ways to create a full backup for Android, that is, a firmware backup. In addition, there are various functions and utilities that allow you to make copies of applications or various Android games, contacts, SMS, etc. separately.

If you are interested in the question: how to make a full backup copy of your Android gadget, then this article will describe the main methods that will solve this issue. Agree, we live in an era of technological boom and mobile devices have become an integral part of it; we store a lot of valuable information on them that needs to be copied and saved.

Backup or backup in Android

There are basically three methods: cloud, software and through system recovery. We will consider everything step by step and try not to miss a single point. Let's start with the easiest ones and gradually move on to more complex ones.

Google Cloud Service

Almost every Android device is connected to a valid Google account, if you don’t have one, then first create an account for this by following this link. After the account is created, go to the menu -> settings (personal section) -> backup and restore.

And we check that there are checkmarks everywhere; if you did not have an entry, then click “Backup account” and the add button, enter all the data from the previously registered entry.

In order to configure what the gadget should remember, we return to the previous menu and go to “Accounts and synchronization”, there we mark the items that need to be reserved.

Important! Synchronization must be active on your smartphone or tablet; it is usually located in the top drop-down menu.

z
This is the most primitive method, and is not able to save your messages, applications, etc., in order to do this, read on.

Software method

To do this, we need a program; we described how to download and install it earlier, so we believe that you already have it installed; it is also necessary for it to be on your device. Now follow the instructions:

1. Launch the MyPhoneExplorer program;

2. Connect the gadget to the PC using a cable;

3. Press F1 or in the File -> Connect menu (phone with Android OS and USB cable method);

4. Wait a minute;

5. As soon as the phone is connected, go to “Miscellaneous” -> “Create a backup”;

6. Select a folder for backup;

7. We mark all the points that need to be saved;

8. Click “Create a backup copy”;

9. Go to “Miscellaneous” -> “Restore from backup”.

Titaniumbackup

There is also a method for creating copies using the application, but you will need root rights and the application itself.

To make a copy:

1. Open TitaniumBU Pro;

2. Go to the “Backups” section;

3. Click the sheet icon with a check mark (upper right corner);

4. In the backup section: “Make r.k. all user software and system data";

5. To restore, go to the section below and tap on the required item.

The path where the r.k. file will be available. (backup) is specified in the application settings.

Rom manager

We described another option using the application, how to install and configure it earlier, so we will not repeat it, you will also need.

Open the utility, go to the “backup and restore” item and select “Save current ROM”, then enter its name.

By default, it will be saved to the memory card /sdcard/clockworkmod/backup

To restore, tap the “Backups” item.

After this, Android will be rebooted into system recovery and a copy will be created, or vice versa, a recovery will be performed.

For smartphones and tablets from Samsung

The manufacturer took care of its users and released a special program, so it will assume that you already have it. Next we proceed according to the instructions.

1. Launch kies;

2. Enable USB debugging on Android;

3. Connect your smartphone or tablet to your personal computer using a cable;

4. We wait until the program determines the model;

5. Go to the “Backup / Restore” item;

6. Select the necessary items and click “backup”;

7. To restore, go to the “Recover data” item;

8. Select the folder with the previously made copy, mark the necessary items for recovery, and click “Recovery”.

Android backup via recovery

To do this, you first need to install one of the alternative recovery options. For example, or , then you need to boot the phone into recovery mode.

For CWM – backup and restore section, for TWRP – backup (copy), restore – restoration.

Bottom line

As you can see, there are many ways to make an Android backup; it’s up to you to choose which one to use. We recommend using myphoneexplorer or kies programs, and for advanced users, do all this through the system recovery menu.

Good afternoon, dear readers. Read the article on how to make a backup on Android without root rights, or with them, what a backup is. Useful programs to help you make a backup copy.

The Android operating system is fraught with a lot of possibilities. The most useful of them is backup. Or backup - this function is also called that. If a failure occurs or you lose your smartphone, you can restore almost all the information. You just need to remember to regularly backup your Android system. How exactly? This article will try to answer this question.

Types of backup

First, let's figure out what exactly is meant by the word “backup”. This is usually the name for copying certain files for their subsequent recovery. You can copy data to the following places:

• microSD card or permanent memory- you copy the data into a separate file or archive, and then move it somewhere else yourself;
• Computer- backup of Android firmware or copying of some third-party files to a PC is usually carried out via a USB cable or via Wi-Fi;
• Cloud services- in some cases, the backup can be automatically uploaded to Dropbox, Google Drive and other similar sites.

What exactly can you copy? This is a more serious question. The operating system itself by default uploads data about your contacts, call logs, messages and much more to Google servers. Usually this is enough for any user.

Third-party applications can copy all kinds of media content. For example, these could be downloaded videos or . In this case, you often specify the folders with the necessary files yourself, so there can be no mistakes - absolutely everything will be copied.

There is also a backup on Android of application settings. It works correctly, however, not on all smartphones. And not all programs allow you to copy their settings. But you need to know about this possibility.

Finally, there is a full backup on Android. This is when the current state of the firmware is copied - completely, from settings to some files hidden from the user. This is done in the most difficult way and often in a special way. And this is required only for those who regularly experiment with their device.

Backup on Android: Do you need root rights?

Some files cannot be copied without . The fact is that the most serious operating system settings are hidden deep in hidden folders. As such, the user does not have access to read them. It is root rights that solve the problem - they provide access to copy absolutely any files.

But most often, no root rights are required. For example, you can back up your messages, contact book, and other aspects of the Android operating system without them. Moreover, this process is often carried out automatically - you may not even know about it.

Backup using the operating system

Android, almost from its first versions, learned to copy user information to Google servers. But at the same time, only basic information is copied - messages, call logs, content of services from the Google Play series, calendar, contacts and documents. If this is enough for you, then get ready to do the following:

1. Go to "Settings".
2. Go to the "Accounts" section.
3. Select Google.
4. In the window that opens, activate the switches next to all the items that you consider necessary. Please note that there is also an “Application Data” item here. But it does not work in the best way - if you reinstall the operating system or some kind of system failure, many programs will still start working from scratch. But all applications will be installed automatically.

Don't forget that you need a Google account for this sync to work. However, without it you can only implement an Android backup to a computer. For other actions, special applications are required, and they need to be downloaded from, where you cannot get there without the appropriate account. Of course, there are all sorts of tricks like downloading programs from third-party resources, but this is a topic for a separate article.

Branded programs for backup on Android

Nowadays, many smartphones come with proprietary shells created by the manufacturer. They can implement additional backup - the data is sent to the device manufacturer’s server. For example, let's look at how to make a backup on Android installed on a Samsung smartphone or tablet:

1. Go to "Settings".
2. Enter the "Cloud and Accounts" section.
3. Click on "Backup and Restore".
4. Select "Backup Settings".
5. Here you can enable automatic backup, which will be uploaded to the server once every 24 hours. Here you can also select the types of information sent to the server. More often than not, Samsung complements Google in this regard. For example, this way you can regularly copy desktop shortcuts, the contents of the Phone application, a list of all installed applications, almost all device parameters, and much more.

The best backup programs for Android

Not all people are satisfied with the standard features of the operating system. Some users are looking for information on how to make a backup on Android using special utilities. They seem to trust them more. In addition, such programs allow you to send a backup to your favorite “cloud,” while the operating system only offers servers from Google and some other companies involved in the production of smartphones.

Without root rights, third-party programs do approximately the same thing as Android itself. They are able to copy contacts and messages, but nothing more. But if you give such a program superuser rights, then everything will change. The breadth of its capabilities will increase significantly. The most popular backup applications and tools are the following:

• Titanium Backup;
• SP FlashTools;
• (CWM).

Titanium Backup

And these are just the three most popular titles! On Google Play you can find at least a dozen other programs of this kind. For now, let's figure out how Android applications are backed up using Titanium Backup. This is the most popular backup program. It is free to use, although some useful features are only available in the advanced version. However, it is not too expensive; $5.99 is a reasonable price to pay for keeping your information safe.

So, what does Titanium Backup copy? It seems like absolutely everything! If you give the application superuser rights (without them it simply does not work), you will get a bunch of possibilities.

• Firstly, you can regularly copy the settings of all programs and games installed on your device. Moreover, you can even copy their APK files!
• Secondly, you can make a backup of all operating system settings. Absolutely everyone! This means you can experiment without worrying about system files.
• Thirdly, although this does not concern our topic, Titanium Backup allows you to freeze user and system software. This is useful in cases where the device is provided to a child - this way you will be sure that he will definitely not install anything by accident.

How exactly to use Titanium Backup?

Everything is very simple:

1. Install and run Titanium Backup.
2. Give the application superuser rights. The utility may also ask you to change some settings - for example, enable the ability to install programs from unknown sources.
3. Click on the button located in the upper right corner. It shows a piece of paper with a check mark.
4. Here is a list of program features. Select the feature you want and click the Start button next to it. For example, you can select “Make r.k. all user software and system data." In this case, absolutely everything will be copied.

The backup copy will be in the form of a separate file. In the application settings you can specify where exactly to save the backup. The safest way is to save it to a memory card. The PRO version allows you to use Box, Dropbox and Google Drive. You can also set up an automatic backup - it will be created according to a schedule. The paid version of the program can also compress files - in this case, they will take up less space in your cloud storage or on your memory card.

Backup of all Android firmware

And even Titanium Backup does not copy the entire state of the operating system. In this case it simply doesn't make sense. If you experience a system crash and Android won't boot, you won't be able to use the recovery because you won't be able to launch the app itself. Then how to make a backup of Android firmware?

Developers from Google have implemented another method that works using .

Make sure the battery is at least 50% charged before proceeding further. Otherwise, there is minimal risk of the device turning into a “brick”.

Different smartphones and tablets may use different methods for visiting the Recovery menu. In any case, you will need to completely turn off the device. Then the following actions are usually performed:

1. You must hold down the volume up button;
2. Next, the power button is pressed.

Some devices use different buttons. For example, Samsung devices can also use the Home button. Please note that all buttons are released after a green robot with an exclamation mark appears on the screen. Otherwise, a normal reboot will occur. Well, in the Recovery Menu you need to find the “Backup and Restore” item. Navigate through the menu using the volume buttons (the touch screen does not work here) and press the appropriate item using the power button. Next, click on “Backup” in the same way. Then all that remains is to wait for the process to complete.

Copying all firmware files can take from five to ten minutes - the exact value depends on the processor power and operating system load.

When the process is complete, click on “Reboot now”. This will reboot the device.

Unfortunately, this method may not work on some smartphones. Almost always, the “Backup and Restore” item is present in the custom Recovery menus. If you have never flashed a device, then you may simply not have this item.

Backup using a computer

Many programs have been written for the Windows and Mac OS X operating systems to receive data from a smartphone. Software developers who regularly test and experiment with portable devices typically use A.D.B.. This is a special program that is used to debug a smartphone or tablet. It has virtually no interface, and all actions are carried out by entering the appropriate commands. But before that, you need to enable USB debugging on your smartphone. This is done as follows:

1. Go to "Settings".
2. If you've never enabled USB debugging, you'll likely need to visit the About Phone section first. Here, click on the “Build number” item several times until you receive a message indicating that you have become a developer.
3. Now go back to the main settings menu and click on the “For Developers” button.
4. Activate the switch next to “USB Debugging”.

When the checkbox is activated, you need to connect the smartphone to the computer and run the ADB program (its exe file). In fact, only with the help of this utility can you create a backup without root. For the most complete backup, enter the following command:

$ adb backup -f "D:\Backup\ADB-2017-08-15.ab" -apk -shared -all -system

If you don’t need APK files, then you don’t have to write the corresponding key. Of course, the path and name of the backup file may be different - we have provided only an example.

If you only need to transfer contacts, messages and other information to your computer, then you can use more understandable programs. For example, an application will allow you to make such a backup on Android MyPhoneExplorer. This computer application has a clear Russian-language interface; it does not ask for any text commands. Therefore, it will not be difficult for you to create a backup copy on your own. We will only say that this program also requires activation of USB debugging.

Summarizing

Now you know what backup is on Android. And from now on you will not have any difficulties creating it. In conclusion, we only note that ordinary people only need to create backup copies in order to then restore the most important information in the event of a smartphone being lost or broken. And for this, the usual synchronization with Google, which we talked about at the very beginning, is enough.

Modern smartphones store a huge amount of necessary and important information, and each user customizes the phone individually. And so, when switching to a new device, the Android owner is faced with a situation where the operating system needs to be configured again. The ideal solution here is a deep or partial backup. But not everyone knows how to make a full Android backup quickly and safely using a tablet or phone without losing important data.

How to backup individual applications on Android

It is not always necessary to copy the entire system, and the process is quite painstaking. If you need to save only specific programs, we recommend using this method. And here the ideal option is the Helium application.

This tool can be freely downloaded from . It works on two “bases”: either provision and all frauds are carried out only on a smartphone, or access to a PC if you do not have “Superuser” mode.

The application allows you to save copies to and in cloud storages, namely Drobox, Google Drive and Box, which is very convenient.

She can:

• Back up the history of incoming and outgoing calls;
• Backup of applications and their settings;
• Backup SMS and contacts.

The paid premium version has more advanced functionality, but if you only need to save, for example, games, the free version will be enough.

The application works perfectly on the latest versions of the operating system, mainly Android 7.0, 7.1 and 8.0. Now let’s look at what actions we will perform in it:

1. Download and install the application on your phone. If there is no root rights, repeat this procedure on the computer. Versions are available for both Windows and Mac. Drivers are also required for the PC. You can find them on the official website of the manufacturer of the connected smartphone.
2. Now let's proceed directly to the backup operation itself. To do this, open the application on the device. If necessary, we connect via a wire to the computer. We are offered several options: a full backup of the phone or only specific applications. Please note that you can copy the entire program with data, or just the data.
3. After all the checkboxes are checked, click "Backup". Choose where to save. If to the Cloud, then indicate the address; if to a computer, open the service with the IP address and transfer it to the search bar of the browser. There we allow copying. Ready. The copies were created successfully.

But here things are a little more complicated, since we need a complete saved copy of Android. Of course, it will take up more space, and there are several different ways to create it.

Backup via system option (No Root)

The easiest and most comfortable option, suitable for beginners and simply users who did not want to waste their time. Opening "Settings", go to point "System" – "Backup", in the location we select Google Drive. Made. The following information will be saved:

• Standard settings (language, time and date);
• Wi-Fi hotspots and passwords, if activated;
• Screen settings (wallpaper, themes, brightness);
• Applications (in most cases just a list, but not internal settings and achievements in games);
• Content located in Google Calendar;
• Materials stored in Gmail, individual mail settings.

Root rights are not required; their presence does not in any way affect the quality of the backup.

Unfortunately, failures during the backup process are possible, which is why many users complain about the insufficient amount of stored information. And on some devices, such a system function refuses to work at all; this may affect phones with an operating system lower than Android 6.0.

Backup Android using FlashTool (No Root)

This is a more serious and difficult procedure that allows you to back up the entire firmware. There will be many stages, and For users who are not confident in their abilities and technical knowledge, we do not recommend this option! But if you are an experienced Android expert, then you can safely get started.

To begin with, we prepare all the necessary materials so that during the backup process we do not have to be distracted by them.

1. Download the program itself directly from the official website of the developer ( flashtool.net);
2. We find original firmware, made specifically for your smartphone;
3. If there are no MTK drivers on your computer, download them.
4. We gain access to the PC, since without it backup is impossible here, we check the functionality of the USB cable and the serviceability of the connectors.
5. Next, extract two files from the firmware, namely the name of the number with permission txt And weg_l.bin. We move these materials to a separate, empty folder.
6. We also place the folder where the software is stored there.
7. Launch the previously downloaded FlashTool program on behalf of the administrator, this is a prerequisite.
8. A page opens where you need specify the path to scatter.txt using a built-in conventional conductor.
9. A new screen should appear where the memory blocks are located. It is necessary to make a backup with them. For this go to the “Memory Test” tab. We check the boxes next to the first five points.
10. Turn off the phone, click on the computer "Start".
11. Now we connect the smartphone using USB.
12. The information begins to be read and displayed on the screen. Once the process is completed, disconnect the device from the personal computer.
13. Opening "Notebook" and transfer the received data there. Please note that empty sectors do not need to be copied. Save and close the notepad.
14. We return to the FlashTool main page again, uncheck the checkbox next to the first item.
15. Open the section “Readback” – “Add”. A new line appears, which we double-click on.
16. We indicate where exactly to save the backup and come up with a name.
17. A small menu appears asking you to specify settings for each sector. Yes, yes, a separate memory block needs separate configuration. We change only the “Length” column, to which we add block data from a saved notebook.
18. Click "OK" and press the top button "Read Back"
19. And the last final step: reconnect the phone and watch the copying process. At the end, a green icon should appear indicating that the operation is complete. Made! Now we repeat similar actions with the remaining sectors.

After the backup is completed, the files can be moved to any cloud storage, because if some major trouble happens to your computer or hard drive, the saved information will be lost, don’t risk it!

So we made a backup on Android via FlashTool using a computer, now we are trying the following method.

Backup via Titanium Backup (Root)

Quite light and comfortable option using special Titanium Backup program. You can download it without any problems from Google Play and install it in the standard way.

Now we launch the application and give it access to root rights. Yes, “Superuser” mode is required here, and this, in principle, is the main disadvantage of this utility. Click on the checkmark image in the upper right corner to go to the page "Batch Actions" and choose what data we want to save. Click next to what you want "Start".

Another worthy option that works on all devices, but from experience I will say that it is much easier than the FlashTool method. For this we need recovery mode. Of course, the most popular and most functional is TWRP, allowing you to install custom firmware, different kernels, but for backup is quite suitable and stock. Begin:

1. Make sure your smartphone has more than 60% charge.
2. Turn off the phone, after about 30 seconds press the power button and the volume rocker down or up, differently on different models.
3. Next, an image of an Android robot with an exclamation mark may appear. If this happened - press the same key combination, but do not hold it. Did you immediately go to recovery? Then we skip this point.
4. Now we find ourselves in the recovery menu itself, only here touch input no longer works. We will switch with keys: the volume rocker, accordingly, is a command "up", volume down rocker – "down", on/off button – "OK".
5. We go down to the point "backup/restore» , click "backup". The copying procedure begins, which takes on average up to 10 minutes. During this period of time, we don’t press anything, we don’t turn on the smartphone, we just wait.
6. When the operation ends, we reboot the smartphone. That's all, ready, the backup of the Android firmware is done.

IMEI, as we know, is the unique identification number of a smartphone. And quite often there are situations when this number needs to be saved, that is, backed up. For this we will use special program Root Explorer. Root rights are also required for it to work.

We open the application, through it we go to the root of the device, where the one we need is located efs folder We carry out a long press, after which an additional mini-menu appears, where we select "Create archive"(Archive permission is at your discretion).

Backing up instant messengers

Messengers for the modern user are simply a necessary thing, helping both to communicate with friends and, for example, to send a photo of completed work to the boss. Let's look at the example of WhatsApp. It stores a huge amount of necessary information: important messages, images, phone numbers. And the ideal way not to lose such materials is to make a backup. How to do it on WhatsApp?

Built-in backup option

All popular instant messengers have their own backup function, which allows you to save the necessary materials directly from the application itself. WhatsApp is no exception.

Begin:

1. Find the application, open the menu;
2. Click "Settings", now go to the tab "Chats" and click "Backup copy".
3. Choose saving to Google Drive and setting the frequency of saving.
4. If you have several Google accounts, select the desired one in the window that appears. Haven't registered or logged in to your account yet? Then click "Add account".
5. And in the last column we select the network under which the copying will take place. Don't forget that using mobile Internet may result in additional charges for the megabytes used.

   The scheme of working with this application is very simple: after installation, go into it, click "Applications", put a tick opposite “WhatsApp” – “Save”. The backup made, or rather the path to save it, can be found in the section "Archived".

   Backup using Restore Transfer

   Another decent app created by the developer Trustlool Apps. Fully translated into Russian, the interface is simple and clear. Besides, There is a huge advantage for beginners and inexperienced users - root rights are not needed.

   How can I restore a copy made in Restore?

   To do this, go to the application, open the section there "Archive", find the necessary materials, and after checking the box, click "Restore".

   Is Super Backup free? I heard that you have to pay for it.

   There are two versions of this tool: basic, that is, having small but useful functionality, and extended premium. In the first option, no payment is required, but for the second you will have to pay. Both versions are freely available on Google Play.

   As you can see, on Android it’s quite easy to make a backup; you can save firmware, instant messengers, applications, and always have the necessary information at hand. The most important thing is to be attentive and strictly follow the instructions. Good luck!

To quickly recover lost data on your smartphone, you need to know what a backup is and how to create it on Android. With its help, you will quickly return all deleted files, restore game and program settings, as well as IMEI, identification numbers, passwords and all other information contained on the device.

Contents:

Definition

After a factory reset or a forced system restore using a backup, you can quickly return all lost data and avoid wasting time re-installing programs and configuring the OS.

A copy of the data is created using special programs. The most popular utilities:

• Titanium Backup;
• Super Backup;
• Nandroid Manager;
• Helium and others;
• SP FlashTools.

Types of backups inAndroid

On Android OS, users can create a backup copy of the entire system or its individual components:

• Copy SMS -messages and contact list ;
• Backup of the entire system taking into account security settings (saving all lock passwords);
• Backup any selected files ;
• Backup photos and videos ;
• Copy of information account Google ;
• Backup for IMEI .

Why is it important to create Backups periodically?

Backup allows you to get rid of the problems associated with sudden loss of data on your smartphone. Periodically creating a backup will allow you to save all operating system settings, as well as messages and multimedia files.

1 Before updating the firmware . It doesn't matter whether you download a new version of Android over the air or install updates manually, create a copy of the installed OS. We recommend moving all photos, videos and music to a memory card or uploading this data to cloud storage;

2 Before resetting. Over time, smartphone users may experience a decrease in the performance of their gadget. This happens due to RAM load and viruses. The easiest way to restore devices is to reset the OS to factory settings. Before doing this, it is better to create a backup of your phone book and SMS so as not to lose important data;

3 To reset the lock password. If you set a password, pattern or PIN code and forgot it, you can reset it without losing data by using a backup. The only requirement is that an archive with a copy of the data must be created before setting the password.

Also, periodically creating a backup phone book will allow you to quickly return lost numbers in the event of a SIM card error or after clearing the memory card.

What is needed to create a copy?

To create a backup in Android OS in the standard way, you will need:

• Superuser rights – ROOT must be active on the smartphone at the time the copy is generated;
• Storage media for copies – this can be a built-in memory card, any cloud storage or the memory of your computer;
• Backup program . Software that works with backups with active ROOT rights allows you to create a copy of all data in the operating system - from contacts to arbitrary files and settings of each program.

Backup programs

After flashing your gadget, you get an absolutely “clean” software shell. You will not be able to return any programs, accounts or settings from the previous version of the OS if you did not take care of creating a backup copy in advance.

Many users prefer to install applications from scratch. However, it is much easier to use a backup and return all application settings using one archive. Restoring previous settings does not affect the operation of the OS in any way and does not cause bugs or errors.

Backup programs will be relevant for those applications that are not in the official Play Market .

To create a backup of one installed program or several types of software at once, use the instructions for one of the following utilities.

Titanium Backup

The utility has more than 5 million official downloads on the Play Market. The application not only allows you to restore operating system data, but also works with software installed by the manufacturer, removing components and settings that a regular user cannot remove using the standard settings window.

• Setting up backup according to a specific schedule;
• Move programs between internal and external memory without having to close the application;
• Quick scan for a new firmware version;
• Firmware installation;
• Storing the history of calls and text messages from a mobile operator;
• Backup browser bookmarks;
• Backup router access point;
• Data synchronization with cloud services DropBox, OneDrive, Google Drive;
• Assigning system status to any program (the option is configured by the user);
• Creating a backup archive that can be re-installed on a smartphone using the console;
• Synchronize settings and application data between several gadgets.

Convenient transfer of settings from one gadget to another is the most useful feature of Titanium Backup. If it happens that your smartphone breaks down or you lose it, thanks to a backup you can easily restore all contacts and messages in popular instant messengers and transfer the information to another device.

You don't need an old SIM card to transfer data. All you need is a second gadget, a backup archive and the Titanium Backup utility. All backups created in the program automatically synchronizes with one of your cloud storages:

• Go to the utility window Titanium Backup;
• In the list of programs installed on the smartphone, select the desired messenger or other application to create a backup copy of its settings. In our case, we will archive all numbers and messages from Whatsapp;
• Tap on the program name for a few seconds. In the pop-up window, click on the field "Save";
• Next, select cloud storage, to which an archive with software settings will be sent.

To move program data to a second gadget or restore settings after a factory reset, reinstall Whatsapp messenger and Titanium Backup. Open the recovery tool and sync the utility with the cloud.

In the list of all programs installed on your smartphone, select the desired messenger, click on it and in the options menu click on “Restore”. Titanium Backup will automatically create the required backup copy in the cloud and return all lost files to the program. You will be able to use all your contacts again and access lost chats.

Helium

1 Sync applications on multiple devices;

2 System backup;

3 Convenient file explorer;

4 Uninstalling programs and rolling back their updates.

To create a backup copy of the installed program data, follow the instructions:

• Open the Helium app. The Carbon file explorer will appear in the main window of the utility - this is a built-in service for viewing a list of all installed applications. Click on the desired program and select from the action menu "Backup";
• Wait until the copy is completed. The created archive will be sent to the cloud;

To restore information from a copy using Helium, open the utility on another device. In the settings, activate the item "Synchronization with the cloud". Next, in the main program window, go to the tab "Restore and Sync".

Select the program whose data you want to return and click on “Restore”.

To create any other type of backup, go to the “Browse” tab and select one of the backup options.

Saving IMEI

As a result of a factory reset or software errors, IMEI ID may be lost. However, you can restore it using a backup copy.

• After flashing or resetting to factory settings, problems arise with communication (cellular network, Bluetooth, Wi-Fi);
• Complete no connection to GPS;
• The phone does not see any SIM card.

You can restore the ID only with superuser rights. To return the IMEI, you will need to install the Android Terminal Emulator console emulator utility (if your phone does not see the network, download installation APK on computer and then move the file to your phone via USB connection).

• First we need to know the EFS code. To do this, enter the command mount and press Enter to execute it;
• A text will appear in the console window in which you should find the EFS command, written through a slash. The text identifier before the command is the code we need. Code search example:

• Write down the found code on a piece of paper and restart the application. After restarting the emulator, enter the command to restore IMEI (each line must be entered via Enter). XXXXX is the EFS code found;

• To save IMEI settings without leaving the program, enter the following lines:

After successfully completing all commands, exit the emulator window, restart your smartphone and check the cellular network, geolocation and Internet connection. Everything should work fine. If desired, you can check the presence of IMEI using the engineering menu.

Backup photos and videos

As a result of your smartphone being stolen or reset to factory settings, the most unpleasant thing is the loss of photos, videos, music and other personal data. All programs can be reinstalled, but it is almost impossible to return personal information without premature preparation.

Using the Google+ app

The standard Google application is pre-installed on all Android devices. The purpose of Google+ is to unite and synchronize everyone Google services in one account. If your device has Google Drive cloud storage and the Google+ application - this does not mean that file synchronization is configured.

The fact is that in the mobile version of Google Drive You cannot configure synchronization for a specific folder. Users can only activate the automatic sending of all photos taken with the gadget’s camera through the smartphone settings.

Follow the instructions to sync any folder on your smartphone with One Drive and automatically send copies of files to the cloud:

1 Install the FolderSync application on your smartphone or update it to a new version if the utility is already on your smartphone. The utility allows you to select any folder in the smartphone’s memory and configure its synchronization with the cloud (link to the Play Market page :);

2 Further, for devices with Android OS 0 and higher, it is not necessary to allow access to all folders and files on the smartphone. To do this, simply open the FolderSync program immediately after the first installation and press the button in the pop-up window "Allow";

3 To set up automatic backup of photos, videos and other files in the main FolderSync window, click the button "Create New Sync";

4 Then the built-in assistant window will open. In it you need to enter a name for the created “folder-cloud storage” pair;

6 In the horse that appears, select cloud service OneDrive or another site, with whom you want to set up a binding;

8 To confirm the action and save the settings, click on "Authenticate Account";

All user data is added to the repository. No matter what happens to your phone, you can always get your photos back using any computer or browser.

At the directory selection stage, you will be prompted configure one of the following options for connecting to cloud storage:

• Connecting to a local folder(select if the backup data will be created and located only on your smartphone);
• Sync with a remote folder(if you want to create a backup for a folder on your computer);
• Hybrid option(to create a backup of this smartphone and other remote gadgets).

In the connection settings, you can select a schedule according to which synchronization will occur. We recommend sending data to the cloud every day. In case of an error or breakdown of the phone, everything important files will be backed up.

other methods

In addition to Google Drive storage, you can also choose any of the following services:

All these cloud storages have client applications in the Google Play store and the ability to synchronize phone data with the server through the usual program settings.

We create a backup of any files

In addition to the options described above for creating a backup of photos, music, videos, users can download the following programs to their smartphone for work with backup copies of documents of any format:

• DataSync;
• DropSync.

DataSync

The application works in a similar way to FolderSync discussed above and allows you to create a backup of any information that is stored in the internal or external memory of the device (with the exception of installed programs and system settings).

Also, DataSync allows you to configure sending a backup from one device to another via Bluetooth connection, which is convenient when you need to save important information but there is no Internet connection.

DropSync

(after synchronization, the data remains in the smartphone’s memory);(automatically deletes information from the phone’s memory to free up space. Users can access files using cloud storage linked to the program);

Download only– receiving a backup from the cloud and adding its contents to the smartphone’s memory.

Backup for all data and settings

Full backup function supported by menu recovery type TWRP or CWM. TWRP is an advanced recovery menu that is installed on the phone by the user, and CWM is an alternative recovery menu.

Firmware with one of two types of recovery is installed in the system partition of the smartphone’s memory, after which you can create a backup of absolutely all data. After recovery, you will be able to use all lost programs, contacts and files again.

Also, created in CWM or TWRP backup can be installed on any other Android device if it supports the created firmware version. Nandroid Backup Online

Nandroid Manager

The utility allows you to create a quick standard (copying all data) or custom backup of the system (the user selects what needs to be saved) without going into the recovery menu. In the application settings you can select the following backup options:

• Backup name– contains a unique name, date, code and firmware name;
• Creation Mode– normal (full), custom selection of memory sections;
• Copy type– CWM or TWRP. You can also select compression to save disk space;
• The place where the backup will be stored. You can add it to your phone's memory, download it to your PC, or upload it to the cloud;
• Exclusion from backup contents temporary files, bugs, erroneous system settings, cache and viruses found.

The Nandroid Manager utility synchronizes the created backup archive with the cloud, FTP server. Users have access to the function of creating a schedule for updating a backup copy. To save battery power, we recommend that you configure the downloading of a new version of the backup only during the period when the gadget is charging.

Backup with ADB

ADB is a debugging bridge for Android OS. In simple words, using ADB you can create a system backup, connecting your smartphone to your computer. ADB is a console application in which the user enters system programs running on the phone.

• Viewing the content and system settings of connected gadgets;
• Client-server interaction between smartphone and PC;
• View logs;
• Removing or cleaning the DATA system partition;
• Quickly copy files of any format between devices;
• Executing the firmware;
• Application of control scripts;
• Removing superuser rights;
• Manage network connection parameters.

Launch the folder that appeared on your computer desktop as a result of installing ADB Run. Connect the phone to the PC and create a text document devices.cmd in the ADB Run program folder (the file must be a standard notepad object or any other text editor. Immediately after creation, rename the TXT format to CMD).

Open devices.cmd and write in the file the following commands:

• echo off
• adb devices
• pause

When the text about the successful completion of the operation appears, enter a new command to create a backup current firmware state:

The backup copy will be saved to the root folder of the ADB Run utility on your computer. You can move it to any other folder or cloud.

Super Backup application - creating a copy without ROOT

To create a backup copy of your smartphone data, you can use third-party programs that, without superuser rights, can configure a backup of selected information.

1 Applications;

2 SMS;

3 Call log;

4 Calendar;

5 Bookmarks;

6 Phone book contacts.

Also, the application is capable block ads in browser and installed programs or restrict access to programs by creating an access password. Super Backup syncs with linked cloud storage.

To start working with the program, select the desired type of data to be backed up. Next, select cloud storage, enter the name of the archive containing the copy and wait until the copying process is completed.

To restore information, re-run the program, go to the section "Recovery". Next, go to the cloud memory and select the desired archive.

Conclusion

To never lose important data on your smartphone, Follow these tips to create a backup:

• Always keep at least one phone backup on each of your gadgets . If several devices fail at the same time, you can always restore their operation;
• Automatic copy creation . It is recommended to set up regular backup generation and uploading to the cloud. The operation will happen in the background, and you will never forget to copy the necessary data for recovery;
• Using a backup is a last resort . Try to restore the OS only in cases where you can no longer find a way to fix the error or return data;
• Don't create too many copies of the same operating system and label each one backup -file with the name of the firmware and the date of its creation. This will make it much easier for you to decide what exactly and over what period you will restore.