What is a KPT archive, how to work with the polygon service. Cadastral plan of the territory of Batishchev landfill KPT archive

Jan 21, 2016 11:36

When receiving documents for real estate, in particular land, many hear the following phrase: “You need to have cadastral plan of the territory! What is it and why is a cadastral document needed?

What information does the cadastral plan of the territory contain?

According to generally accepted rules, the cadastral plan of the territory contained, in the old model, V sections, each of which had unique characteristics. Currently, you can order both a cadastral plan of the territory based on the coordinate points of the site, and an expanded USRN extract, which contains elements of the cadastral plan of the territory. The general structure of cadastral documents is as follows:

• The structure responsible for cadastral registration.
• Cadastral number of the object of right.
• Territorial location.
• Area and boundaries.
• Summarizing data on the characteristics of the boundaries of the object under study.
• Data on actual boundaries, as well as data on adjacent areas in text format.
• Information and information about the object of right about the site in text version
• Diagrams, planograms, and public graphics that show the boundaries of each parcel element that are combined into a single parcel

All information on the cadastral plot is available in open form through the Unified State Register of Real Estate

Currently, the elements of the cadastral plan, according to the new Federal Law, are reflected in the Unified State Register of Real Estate, which replaces previously valid cadastral documents, including cadastral passport of the object rights, certificate of state registration of property.

You can order an extract of the Unified State Register of Real Estate in electronic form or on paper, and the delivery time for the document will be from 5-10 minutes, depending on the category of the document - (simple, with a stamp on paper, in the digital signature of Rosreestr, etc.). All document data is current on the day the request is made.

How to order a cadastral plan of the territory

Currently, the cadastral plan of the territory can be ordered both in the form of an extract from the Unified State Register of Real Estate, and as a separate document - Cadastral plan of the territory of the block indicating the coordinate points of the object of law. Below is a scheme for ordering a USRN extract.

• If you know the cadastral number, you can enter it on the order page to complete the document (go to the order page).

• If the number is unknown to you, enter the physical address of the object in the search field, use the pop-up tips if necessary, and click the “Find” button. After that, click the “Order documents” button. The search is located at the top of the page.

• We select the document type “USRN Extract”; if necessary, you can order another type of document.

• Select the document type. Electronic media: simple form - delivery on the day of order. With the digital signature stamp of Rosreestr - within 5 days. Paper carrier: delivery by courier in Moscow within 5 days; within Russia - through the Russian Post service - from 6 working days.

• Fill in the recipient's details - first and last name, as well as postal delivery or email address.
• Select payment methods - bank card, payment terminal or e-wallet.
• We receive the document “Extract from the Unified State Register of Real Estate”.

The extract contains 4 sections of information, including general characteristics of the land plot, information about land rights, and a graphic part of the land plot. The cost of the service includes state duty. The relevance of the data in the USRN extract is 30 days for presentation upon request.

For ordinary owners or tenants of real estate or land, it is of no value, since by itself it is not useful anywhere. This document can be used for cadastral work. Therefore, in most cases it is ordered by cadastral engineers in the process or preparation. Read more about the cadastral plan of the territory below.

What kind of document is this?

The cadastral plan of the territory is an extract from the State Property Committee, which contains certain data on land plots and real estate objects within the cadastral quarter.

A cadastral quarter is a compact territory, which is the smallest unit of cadastral division, the boundaries of which, as a rule, coincide with natural or artificial actual boundaries (roads, rivers, etc.). In the cadastral number, the block number is located before the plot number and has 6 or 7 digits - 50:28: 3220039 :12.

In fact, the graphic and some text parts of CBT duplicate. But the main data - coordinates - is not there.

What is it for?

As mentioned above, this is a necessary document for preparation and plans. It provides cadastral engineers with comprehensive information about cadastral boundaries adjacent to the property being registered. This allows you to unambiguously determine the location of the property under study and the presence of overlays or other cadastral errors.

Accordingly, the “shelf life” of this document is very short - after all, even immediately after its receipt, some object in a given cadastral quarter may “stand up” on the cadastre. And the CBT received will no longer be fully relevant.

Where and in what form can I get it?

CBT can be ordered in paper or electronic form.

In both forms, CBT has the same legal force. The paper must contain the seal and signature of the official who prepared it. The electronic form must have a file with the electronic signature of the official (with the .sig extension).

1. It is ordered on paper at the nearest branch of the cadastral chamber (for the Moscow region) or at the MFC (in Moscow). This is usually a large document and is rarely ordered in paper form. It is much more convenient to work with it electronically. Moreover, the preparation time and cost of the paper version are many times greater than the electronic version.

2. Electronically - on the official website of Rosreestr in the “Public Services” section.

3. Our cadastral engineers can also order CPT for you in electronic form. The cost of 1 CPT is 500 rubles. Receipt time is up to 15 working days. But this is the maximum period - usually about 7 days (it all depends on the efficiency of the cadastral registration authorities). For reference, you can see an example of the CPT in the form in which it is prepared by Rosreestr specialists. It is often not easy to independently convert what is issued in electronic form into a human-readable format. To get a normal document you need to run it through the program and get .

What does the cadastral plan of the territory look like?

Typically, CBT consists of forms CPT.1-CPT.5. Below is a brief description of these sections.

CBT 1.1 and CBT1.2 contain data on land plots and capital construction projects (CCS), respectively. The cadastral numbers, address, category of land, permitted use, area and cadastral value of all objects located in the quarter are indicated here.

KPT.2.1-KPT.2.4 contain a plan (drawing) of the boundaries of the cadastral quarter, land plots, OKS and linear structures with protective land right of way. Moreover, when opening xml. document (if there is an Internet connection), these plans can be scaled. In printed form, it will most likely look like a jumble of lines and inscriptions, which is hardly possible to understand.

KPT.3.1-KPT3.3 contain the coordinates of the boundaries of land plots and public buildings of interest to cadastral engineers, their fixation with boundary signs (temporary, permanent or its absence) and the accuracy of determining boundary marks (with which cadastral engineers calculated their coordinates).

contains the coordinates of the cadastral quarter and the boundaries of security zones of linear structures. Separately, the boundaries of security zones of linear structures are highlighted due to the fact that most often they pass through several cadastral blocks and their boundaries are not closed. It also indicates what restrictions are imposed within the security zones. This is often important for owners of land plots through which some communications pass. Perhaps due to restrictions, it will be impossible to erect permanent structures or lay underground communications.

The company’s specialists can order for you a CPT of a land plot for any purpose. The cost of 1 plan is 500 rub. Ordered electronically. Call 8 903-253-35-84.

Hide Drawing Formator User's Guide

Upload files with the Cadastral Territory Plan (CTP), Cadastral Extract (CV), Boundary Plan (MP) and Technical Plan (TP) and receive a drawing.
These files were obtained from Rosreestr, have an XML extension, and are usually in ZIP archives. You can put all existing XML and ZIP files in one folder and download them in one archive. Moreover, there is no need to separate the CPT from cadastral extracts, boundary plans and others. It is also possible to download RAR and ZIP archive with these files. In addition to XML, archives may contain files with a digital signature, other files, and nested archives. The output will be a drawing with the DXF extension, containing data from the selected files - opens with AutoCAD (versions 2010 and higher), as well as a lot of open source software for any platform (including mobile). You will also receive a report for opening in Excel (version 2007 and higher) with the XLSX extension.

Instructions:

1. Select the required files from your computer and extension: XML, ZIP, RAR
2. Typically, coordinate systems used to describe real estate objects have a coordinate X axis to the north, and a Y axis to the east, since most CAD applications have the familiar horizontal X axis (which corresponds to the east) and a vertical Y axis (which corresponds to the north) , to visually display the drawing, check the “Swap X and Y coordinates” checkbox.
3. Click "Generate drawing and report" and wait for completion.
4. When it is 100% complete, 2 links will appear to download the result - “download dxf”, “download xlsx” - click on them and download the files to your computer.

Layers in DXF drawing:

The drawing will display data from all types of XML files, and each type has its own group of layers:
1. for KPT files - layers like KPT_Contour, KPT_CadastralNumber - that is, with the KPT prefix
2. for KV files - layers with the KV_ prefix
3. for MP files - layers with the MP_ prefix
4. for TP files - layers with the prefix TP_

In addition, each property of the KPT file is separated into a separate layer, so the KPT_Contour layer contains the contour of the site, and the KPT_CadastralNumber layer contains a text inscription with the cadastral number. In turn, the TP_Contour layer contains the contour of the building/structure. In the text, Russian letters are written with English characters.

The first thing you will see is outlines, and inside each outline there will be a block of text.

The following are the other layers:
KPT_OMS - OMS point
KPT_Area - Area and error
KPT_Location - Location
KPT_State - Section status
KPT_Rights - Rights
KPT_Encumbrances - Entitlement restrictions
KPT_Utilization - Permitted use
KPT_SubEncumbrances - Sub-encumbrances restrictions
KPT_Category - PCT category
KPT_DeltaGeopoint - Point error (next to each contour point)
KPT_CategoryShtrih - Hatching depending on category
KPT_Kvartali - Quarters
KPT_Zones - Zones
KPT_Bounds - PCT boundaries
TP_Type - Type: building / structure

Pages in XLSX report:

1. KPT objects - Lists objects from all KPT files with cadastral number and other properties, such as area, category
2. KV objects - Lists objects from all KV files
3. MP objects - Lists objects from all MP files
4. TP objects - Objects from all TP files are listed
5. Area errors - Inconsistencies between the calculated area of ​​the plots and the one written in XML are listed
6. Areas by Category - Shows what area is accounted for by each Land Category
7. Areas by Utilization - Shows how much area is accounted for for each Permitted Use
If there are any problems, please email

All land plots in the country must be registered in the cadastre. This is necessary to create a unified database of cadastral territories. All data on cadastral plans of territories is stored in a single database, which greatly simplifies the work process for engineers. Such a collection is the KPT archive, which cadastral engineers use during voluntary ambushes.

The CPT archive includes thematic blocks or territories within a certain cadastral block, which are created on a cartographic basis with a significant amount of data. Specialists - cadastral engineers - work on them.

Important! CPT is one that includes important data about a particular area.

Without a registration certificate, it will not be possible to register even if you have a number that confirms the right to own the land plot. The CPT is created in electronic form (it is this copy that is stored in the virtual archive) or in paper form. Contents of the document:

1. Pages with text - information regarding the size of the plot, address, etc. is indicated here.
2. Schemes are a visual representation of a site with an accurate depiction of nearby objects.

Test site to help cadastral engineers

Of course, the engineer does not carry out all the work on creating a CPT manually; the extensive Polygon software comes to his aid. Among the key features of the programs:

• Formation of an electronic document that is transferred to the archive. Moreover, Polygon users have greater opportunities to work with the archive.
• Signing and verifying the authenticity of files.
• Creation of ZIP archives.

You can try out the Polygon program in a demo version and, which is very convenient, there are tips that help you in your work. This will make the job easy and fast. The Polygon developers have prepared a detailed video tutorial that will help you understand the functioning of the program even better.

Important! The uninterrupted and fast operation of Polygon is supported by a whole support team, and consultation can be obtained free of charge.

Procedure for working with the archive

In order to get started, you should register and enter the following data in the form provided:

1. Login.
2. Password, including confirming it.
3. E-mail address.
4. First and last name.
5. Company name.
6. Enter the captcha.

As you can see, the process will take hardly more than a couple of minutes. Registration is necessary in order for points for using the system to be awarded to a specific person who conducts cadastral activities.

In order to download files you need to follow this sequence:

• Select a file. Moreover, this could be an archive or an electronic document. You can download no more than 1000 files at a time.
• Click "send".

Downloading documents has the following order:

1. Select your region from the list.
2. Select the one you need from the list of cadastral blocks.
3. Click on the required document and you can view the object’s statistics.
4. Download.

It is worth noting that the portal works for free, but to popularize it, the developer is asked to share a link to it on social networks and forums, write reviews and tell colleagues about a similar service.

Operating rules

There are certain rules for working with the archive, including:

• A participant in the archive, if registered, can download exactly as many files as he has uploaded.
• Working with the archive is voluntary.
• When downloading a file, it is understood that any other user can download it, free of charge. Documents are stored on the portal for an unlimited period; they are not deleted.
• The previously downloaded file can be downloaded as many times as you like.
• The creators of the archive are not responsible for the safety of documents and their accuracy, since the KTP is uploaded by portal participants.
• There is a limit on the number of downloaded files.
• You can upload any number of files.

Conclusion

The KPT archive is currently a convenient repository for a huge number of cadastral plans. Working with the portal is extremely convenient and understandable, and does not require huge resources and knowledge.