The universal remote for the TV is not configured. How to set up a universal TV remote? Instruction. Problems at work

Manufacturers of equipment are trying to equip each device with a remote control so that it is convenient for the user to use their products. No need to get up to turn off the light, adjust the air conditioner, fan, turn on / off the TV, you can do everything while sitting on the couch. This, of course, is convenient, but over time, coffee tables are cluttered with different remote controls, which creates some confusion and annoyance.

If you still don’t know that there is a universal remote control that can be configured to control several devices at once, then in this article we will tell you about all its capabilities and provide instructions on how to use it and how to properly configure it.

If you have become a happy user of digital television, then a new device with a remote control has appeared in your apartment - a set-top box-receiver. And in order not to add another remote control to everyday life, let's figure out how to use the universal remote control.

Despite all the breakthroughs in technology, remote control devices have not changed at all. They may have different shapes, but the design of any remote control still consists of a case, an electronic circuit, buttons, LEDs, and an autonomous power source.

The universal remote has an identical internal structure, only it can be configured to control several devices at once. For example, having bought such a device, you can remove the television, set-top box and multimedia remote control in a cabinet, and register all their functions in a universal remote control.

Can any remote control be universal? No. Although they look similar in appearance, they have different internal electronic circuitry. Only devices designated for this purpose can be configured to control multiple devices.

Difference between original and universal remote

The TV remote control, for example, Tricolor TV, is a useless device in itself, it can only be used in conjunction with another device - a television receiver, for which it was created.

The principle of operation of the remote control is based on three actions:

• When you press the button of the device, you mechanically activate a microcircuit in which a certain sequence of electrical impulses is created;
• The LED element of the remote control converts the received command into infrared radiation with a wavelength of 0.75-1.4 microns, and sends a signal to the paired device;
• The TV has a phototransistor that detects this IR signal and converts it into its own electrical impulse, transmits it to its control unit, due to which the command you set is carried out.

The communication method used in remote controls is called PCM, or Pulse Code Modulation. Its peculiarity lies in the fact that each command is assigned a separate 3-bit sequence, for example:

000 - turn off the TV;
001 - select the next channel;
010 - return the previous channel;
011 - increase the volume;
100 - decrease the volume;
111 - turn on the TV, etc.

That is, when you press a button on the remote control, the electronic circuit turns on the IR LED according to a given pattern: "111" - ON, ON, ON, with a clear long signal step, for example, 3 milliseconds. If you have selected the volume button, which has the code 011, then the LED will perform three such actions with a predefined delay: turn off, turn on and turn on again.

There are three different types of remote controls on the market:

• Original;
• Unoriginal;
• Universal.

Original and non-original remote controls are control devices designed for one specific model of technical devices. The only difference is that the first type is produced by the native manufacturing plant, where the TV itself was assembled, and non-original remote controls are produced by different companies under license.

Universal remotes (UPDU) are learning control devices that:

• can be customized;
• Suitable for many TV models;
• Can be used instead of a lost remote control for any technical device.

The universal remote control can be selected in shape, size, color, design, depending on personal preferences. Inside such a device there is a special program and a special code base that allow you to determine the signals from almost any TV.

The most common brands of universal remote control are Supra, Huayu and Beeline.

How to find out the TV code

To set up a universal remote for your TV, it is advisable to know the three- or four-digit code for a specific model. You can find such codes either in the technical data sheet of the TV, or on the website of the equipment manufacturer, or in special ones. That's what it's called - "Code for setting up the remote control".

But how to set up the remote to the TV if you could not find the right code for your model? To do this, each UPDU has an automatic setup function with a program code search. Simply press the desired combination of numbers, after which the auto-select command will start.

Setting up universal remote controls

First of all, you need to insert power supplies into the remote control. Some remotes are sold without batteries, so you will have to buy them separately. You can stop on batteries, or you can immediately purchase rechargeable cells. The second option will cost more, but they can be recharged hundreds of times from the network.

Then turn on the TV to be paired with the RC. On the remote control, select the desired mode: TV, DVD, PVR or AUDIO (to set up the TV, use the button TV). Hold the button for 3 seconds to turn on the indicator on the front of the instrument.

But the next steps will be different: if you do not know the model code of your TV, then go to the next section of automatic setup, and if the code is known, then read the instructions for manual setup.

Automatic

On the numeric remote control panel, dial the number "9999" without removing your finger from the "9" key until the TV turns off. After that, the automatic channel selection procedure will begin, which can take up to 15 minutes.

This method is used if the code for the brand of your device is not in the list of brands. However, if there is a conflict of control buttons (the function of one button extends to several devices), then their correction will not be possible if a search was started in the entire database (by the combination “9999”).

In different models, the combination of buttons may be different, it is better to look at the information on the packaging from the remote control or in the instructions attached to it.

To set up the UPDU SUPRA (Supra), which is most often used to control LG, Samsung or Philips TM TVs, the algorithm will be as follows:

• Turn on the TV;
• Point the remote control at him;
• Power and hold it for 5-6 seconds until the LED lights up;
• Wait until the volume icon appears on the screen. Try changing the sound setting, if the TV responds, then the setting was successful.

UPDU HUAYU is configured according to the following scheme:

• Turn on the TV;
• On the remote control panel, press the button Set, followed by the button Power, and then release both buttons at the same time;
• Press the key again Power;
• Make sure that the volume symbol appears on the screen;
• To exit the programming mode, press the key 2 times. Set.

There is also a third auto-tuning option, implemented in some models of universal remotes:

• Turn on the TV receiver;
• Click the button TV and hold it until the LED lights up;
• Press and hold the button Mute to connect search;
• Wait until the end of the process and check the operation of the remote control with any command: if the TV responds, then the remote control has been configured successfully.

Manual

All TVs have their own pairing code, and knowing it, you can quickly set up a universal remote control. Find out your model code and do the following:

• Turn on the TV receiver;
• Press the button on the UPDU Power and, without releasing it, enter the code of your TV model;
• When the device LED blinks 2 times, release the button Power.

• To enter programming mode, press two buttons simultaneously: Power and “Set” and wait for the PU indicator to be constantly lit;
• Enter a four-digit code;
• The indicator should go out, the exit is carried out by the "Set" button.

UPDU Beeline

• Turn on the TV;
• Press 2 buttons: "C" and "Setup";
• Wait until the initialization is completed and after the indicator blinks 2 times, the buttons can be released;
• The performance check is carried out by the "Vol" button.

If you do not manage to enter the code within one minute, the TV will be switched to normal mode and the setup will need to start over.

No code

You can also set up a universal TV remote control by searching for a code. To do this, follow these steps:

• Turn on the TV and point the remote control at it;
• Press two buttons at the same time: TV and OK. Keep them active for 2-3 seconds until all the buttons on the remote control light up. Wait until only the number buttons remain lit;
• Slowly press the channel switch button "CH+" until the TV turns off, this will mean that the code is selected;
• To save your settings, click the button TV.

Please note that the speed of code selection for each TV model is different, therefore, while pressing "CH +", wait a couple of seconds to notice the reaction of the TV receiver.

Smartphones with universal remote function

Did you know that the latest models of some smartphones already have a universal remote function? You can not buy another remote control, but simply set your phone to control all devices in your apartment, but only those that have the SMART option.

To set up a universal remote on your smartphone, you will have to visit the Play Store and download the mobile application. There are many of them, so read the reviews and install the most suitable for you.

After starting the program, you will be offered a list of equipment (set-top box, media streamer, TV, player, smart home, etc.). Choose what you want to manage. Next, you will need to specify the manufacturer and the pairing method (Wi-Fi, Bluetooth, infrared).

The program will start searching for equipment, and as soon as you see the name of your equipment on the phone screen, select it. A special confirmation code will appear on the TV display, which will remain to be entered into the program on the smartphone. Now you have in your hands not just a phone, but also a remote control.

This setup is extremely simple and straightforward. All instructions consistently appear on the phone, and you just have to confirm your actions. For such a setting, you do not need to know the code and automatic search is also not required. Remote communication is established using the selected wireless technology with specific devices in your apartment.

Having a single remote control for all the equipment in the house is very convenient. And as you understood from our article, setting up a universal remote control is quite simple and fast.

Note.

Perhaps, now there is not a single living space or office where modern household appliances are not used. When it comes to television and radio equipment, then remote controls are always attached to it. And there are more and more such devices that make our life interesting, comfortable and diverse.

In order not to be confused every time, which remote control, from which device, you can purchase one, but capable of turning on and off absolutely all household appliances in your home. Such technical devices have long been in use, but many people are frightened by the fact that they do not know how to set up a universal remote control.

The differences between a conventional remote control for a certain type of equipment and a universal one is that inside a small plastic box there is a certain microcircuit that allows you to expand the memory of this device and write commands not to one receiver, but to several at once. Let's see how this can be done.

Where to begin?

If you don’t know how to set up a universal remote control for, and other home gadgets, then, first of all, you should look into the box from the purchased remote control. Most often there is a specific instruction that will help you figure out the configuration of this particular remote control.

On this piece of paper, which is an instruction, you can find codes with which even a person who does not know how to set up a universal remote control for a TV, music center or air conditioner can do it without problems on their own.

Codes are four-digit combinations of numbers that correspond to a specific brand of household appliances. For each of them, several codes are provided, and in case of failure with the first set of numbers, you can try the following.

Active buttons

To set up a universal remote control, we need only a few buttons from the many located on the working surface. These are the TV, SET (or DVB) and POWER buttons. In addition, an important indicator when setting up the remote control will be the signal light, which is present on every universal remote control and is absent on a regular one.

Let's start setting up

There are several ways to set up your remote and if you fail with the first, you should go to the second and so on. The main thing is not to rush and understand the sequence of actions:

The same algorithm of actions should be carried out with all other household appliances that can be controlled using a multifunctional remote control.

Appearance of the remote control

Remote Control Capabilities

The universal remote control (RC) is a universal device that can replace two remote controls, namely, with this remote control you can control a set-top box (STB) and a TV (TV).

Important information about the remote control

Initially, the remote control is set to control a set-top box (STB), and when the batteries are installed, it starts working in the HUMAX HD7000 mode (code 2222).

Switching to TV mode is carried out by pressing the TV button. When switching to TV mode, the red indicator will flash 1 time. In TV mode, the on/off button, number buttons, volume control buttons, channel change buttons, menu buttons, navigation buttons, and the source selection button (SOURCE) work. The default mode is Samsung TV. In Table 1 you can find the codes for setting the compatibility of other brands of TV manufacturers.

Switching back to STB mode is done by pressing the STB button. When entering STB mode, the green indicator will flash 1 time.

How to set up the remote control to work with a TV set-top box

1.Press and hold the STB button until the indicator turns green.

2.Enter the four-digit set-top box code from the corresponding table.

3.Make sure the indicator blinks green 2 times briefly. If an error occurs, the indicator will flash green 1 time long.

How to set up the remote control to work with the TV

1.Press and hold the TV button until the indicator turns red.

2.Enter the four-digit TV code.

3.Make sure the indicator flashes red 2 times briefly. If an error occurs, the indicator will flash red 1 time long.

Table 1. List of Popular TV Manufacturers and Corresponding Remote Control Codes

Codes for choosing a TV set-top box

The list of supported TV set-top boxes and their setup codes are shown in Table 2.

Table 2. List of supported TV set-top boxes with remote control setup codes

Features of the remote control with TV set-top boxes

Some models of set-top boxes have limited support for functionality, so when you press certain buttons on the remote control, TV boxes will either not perform any action, or will duplicate the actions caused by other buttons on the remote control. A complete list of remote control button functions, depending on the TV set-top box model, is given in Table 3.

Table 3 The list of functional assignments of the remote control buttons in the set-top box mode.

How to reset the remote control

Return to default settings:

1. Press and hold both STB and TV buttons for 5 seconds.

2. Make sure the indicator flashes 4 times in both colors at once (orange visible).

How to switch the remote control to control the set-top box

To switch the remote control to the set-top box, press the STB button.

How to switch the remote to control the TV

To switch the remote to TV, press the TV button.

Troubleshooting

If nothing happens when you press the keys on the remote control, or an action is performed that does not correspond to the pressed button, perform the following steps before contacting support:

Check if the devices are connected to the power supply?

Check if devices are turned on?

Check if the batteries are installed correctly?

Install new alkaline batteries.

If nothing helped, or all the codes have been tried, you should contact the Dom.ru service center.

Was the article helpful?

Losing the remote control won't be a problem as you can buy a universal TV remote. It runs on conventional batteries and performs all the same necessary functions. Most importantly, it can control all household appliances from a distance: TV, air conditioning, music center and others. Therefore, many are interested in how to connect a universal remote control to a TV.

A universal remote control for all household appliances is a device that replaces other remote controls, you just need to configure it correctly. It almost does not differ from the usual one - a plastic case with a set of buttons on the top panel, LEDs, an electronic circuit and a power source in the form of batteries.

The only difference is the presence of a special circuit that can be programmed for any device. Therefore, a conventional remote control cannot be used as a universal one.

The principle of operation is the most common - when you press the button, the induced infrared sensor sends a signal to the receiving device of the household appliance. This is how the given command is launched.

Advantages

Comparing the original controller with the universal one, it should be noted that for one household appliance, the original control device would be the best option. But its disadvantage is that it is suitable for only one device. To control the TV, air conditioning and music center, you will need 3 separate original remotes.

Advantages of the universal remote control:

• you can activate the management of multiple devices;
• costs less than the original;
• suitable even for old models of television receivers, remote controls for which are no longer available;
• longer service life than conventional control system.

TV code

Immediately after purchasing a new universal controller, it will not be possible to turn on any TV - it must first be programmed. To do this, you need a specific model code, which consists of 3 or 4 characters. You can find it in the instructions, on the brand's website or in technical reference tables.

Possible codes for several popular TV brands:

• Samsung - 0021, 0061, 0101.
• LG - 0001, 0021, 0081.
• Philips - 0021, 0151, 1021.

Setting

Many do not know how to set up a universal controller. To do this, you can use one of three configuration methods.

Manual

The most reliable way to activate the remote control. Sequencing:

1. Turn on the unit and point it at the TV.
2. Press the button labeled OK or SET for 5 seconds.
3. Enter the code using the remote control.

Automatic

This method is used when the TV code is unknown. For this:

1. Turn on the TV.
2. Point the remote at the TV.
3. Hold down the SET button until the red indicator next to it lights up.
4. After that, press the Power key.
5. When the indicator starts blinking, the TV will select the code.
6. At this time, carefully monitor the screen - a volume scale should appear. When this happens, press the Mute button.
7. When the setting is completed, the indicator will stop blinking.
8. Press the TV button to make sure the receiver is connected and store the code in memory.

The automatic TV brand search may take 15 to 25 minutes. Then the receiver can be rebooted and start using the UPDU.

No code

Such controllers can select the desired code themselves. For this to happen, you need to do the following:

1. Turn on the TV and point the remote at it.
2. Simultaneously press the TV and OK keys. Hold them until all buttons light up.
3. When only the number keys remain lit, start switching channels with the CH + button until the receiver turns itself off.

After turning off the code will be picked up. Finally, press the TV button to save the settings.

Problems at work

If you cannot connect a new universal remote control, then there are several ways to check its serviceability:

• Batteries often expire due to long storage, they could leak and be discharged. Replacing the power supplies with new ones will help solve the problem.
• There is a possibility that the remote control is not sending an IR signal to the receiver. This can be checked using a digital camera - hold down any button on the controller and point it at the camera. If the lamp does not light up, then the device is faulty.
• It happens that the operation of the control device is affected by surrounding objects. For example, routers and microwaves emit their own radio waves, which can interfere with the remote control signal.

The choice of UPD

Experts advise choosing a suitable universal controller, taking into account several parameters. Among them, response speed is important - this is the speed of the TV's response to pressing a button. Regardless of the function, the TV receiver must respond quickly and clearly.

In addition, check the build quality and materials from which the device is made. Also very important is the comfort of the position in the hand and the accessibility of the buttons so that you can control it with one hand without straining.

Overview of universal remotes

If the original controller for the TV is broken, then high-quality replacements are sold on AliExpress. In the overview of models, you can find out which remote control is suitable for a particular brand of TV.

The analogue of the original device is suitable for all models of Samsung TVs. Equipped with an innovative keyboard with comfortable rubberized buttons. Includes the entire set of necessary functions.

The signal is transmitted over a distance of up to 8 m, and the device is powered by two AAA batteries. The average price is 260 rubles.

• cheap;
• compact;
• comfortable in hand;
• fully replaces the original model;
• no additional installers required.

• average quality of plastic;
• no batteries included.

Chunghop L336

This is a universal programmable device that can be configured to control three different devices. Compatible with DVD, TV, audio systems of different brands. Runs on two AAA batteries. The average price is 300 rubles.

Advantages:

• there are no restrictions on the types of custom equipment;
• easy setup;
• large buttons.

The disadvantages include the impossibility of setting up without the old existing remote control.

The high-quality build model is also suitable for Smart TVs. Recharges with two AAA batteries. Completes all required commands. It costs about 250 rubles.

Advantages:

• full analogue of the standard version;
• the main keys are made convex for convenience;
• 48 buttons.

The disadvantages include soft packaging when transporting goods.

The remote controller can be linked to various Philips TV receivers - it is compatible with most LCD and plasma models of this brand. Signal transmission up to 8 m, powered by two AAA batteries. It costs about 300 rubles.

• saves codes when changing batteries;
• stable operation even at the maximum distance from the receiver;
• has all the functions of a standard controller;
• stable work;
• does not require additional settings.

Of the shortcomings, the lack of batteries in the kit is noted.

Connecting several household appliances to one control system will make life more convenient and comfortable. It is important to learn how to use the universal remote control correctly. Then he will save both money on buying the original, and time searching around the house for several controllers.

Technological progress does not stand still, so every day more and more new models of household appliances appear in the world. They help us to easily put things in order in the house, keep our clothes clean, prepare a large number of delicious dishes, and also create a cozy microclimate. Many appliances have a remote control function, which is not always easy to figure out right away. For a better understanding of this point, below will be described in detail how to use the remote control from the air conditioner to create comfortable conditions in the room.

Thanks to the production of air conditioners, it is possible to maintain a stable temperature in the room regardless of the season: in winter, a setting for heat is useful, and in summer, a cold air flow. Of course, there are opponents of this technique, who call the air in such a room “dead”. But is it better to sit in a stuffy room, where there is not even a place for a draft, or to freeze from terrible frosts?

What are the functions of modern air conditioners?

Previously, air conditioning was considered a luxury item for people with high incomes, but now it is available to a person even with an average income. In this regard, in stores you can find different models that have a certain set of functions for the corresponding price.

Among the features of modern air conditioners are:

• warm air supply mode;
• cold air supply mode;
• ventilation mode;
• air cleaning;
• ionization;
• moisturizing;
• spin;
• Set a timer to turn the system on or off.

Accordingly, for each model of equipment there is an original remote control, which helps to select one or another mode and select the necessary characteristics. The designations of the buttons on the remote control have a standard look, so if you have ever used an air conditioner, then this skill will come in handy in the future.

It is worth noting that in the absence of a remote control, the air conditioner can only work in automatic mode. At the same time, he independently chooses which function to turn on - heating or cooling. If the room temperature is lower than the set one, the heating is switched on; if higher - cooling mode.

If you know how to use the remote control from the air conditioner, and it is in good condition, then you can perform the following operations:

• turning off or turning off the air conditioner;
• selection of the most comfortable mode of operation;
• selection of the desired temperature and fan speed;
• using a timer to automatically turn on or off equipment;
• setting the direction of distribution of the air flow, as well as other additional functions that correspond to the purchased model.

Information about the current settings of the air conditioner will be prompted by the icons on the screen of the remote control. Some of these models have a hinged lid, and then the control takes place in two positions: closed and open. All commands given by the user are shown on the display. Therefore, do not be afraid to make a mistake, any action can be easily canceled.

Features of the remote control

It is worth noting that before starting a command from the remote control, you need to check that the selected mode allows you to make the desired settings.

1. The remote control should be located at a distance of no more than 7 m from the front panel of the air conditioner.
2. When transmitting commands, you need to point the remote control strictly at the IR receiver, which is located on the right side of the front panel of the air conditioner.
3. The conditioner with the help of a sound signal confirms receipt of a command from the control panel.
4. There should be no objects between the remote control and the air conditioner that interfere with the signal.
5. When transmitting certain sequences of commands, it is required that the time interval between pressing the buttons does not exceed a certain time. Otherwise, the entered commands are discarded, and the entire sequence of commands will have to be entered again.

The air conditioner must constantly “read” the signals that come from the remote control, for example, temperature readings or other parameters. Therefore, place the remote control in a place where there are no obstacles for signals to pass through.

It is also necessary to monitor the state of the battery charge indicator, which will start flashing when the battery is low, and, if necessary, replace the galvanic cell. Otherwise, the effective operation of the air conditioner as a whole will be impaired.

How to start the air conditioner using the remote control?

The start of the air conditioner is carried out by pressing the "on / off" button on the remote control. After that, an audible signal is emitted, a green LED on the panel, called AIRCON, lights up, and the blinds open.

Then the question arises, how to set the air conditioner to cold or warm mode, turn on ventilation or drying? To do this, there is a "MODE" button, each press of which switches the current mode to another. In this way, you choose the most suitable option for you.

To set the desired temperature, you must use the "+" and "-" buttons, depending on whether you want to turn on the heating or cooling of the room. It is worth noting that some models of air conditioners have a very limited temperature range, which should be clarified in advance before the purchase process, so as not to be upset later. Also make sure you choose the temperature according to the mode you are using. For example, when using the “heating” mode, it will not be possible to create a cool flow of air masses in the room.

If you are using dehumidification or auto mode, the fan speed is not adjustable. In this case, the fan itself sets the necessary parameters.

When you select the "timer" function, you program the automatic operation of the fan for the next day. This is done using the "TIMER" button located on the remote control. “START” and the initial time after which the air conditioner will turn on will appear on its screen. By pressing the "SET" button, you can increase this range from 0 to 10 hours. When you press "START" again, you program the air conditioner to turn off, which is set in the same way.

New generation remote controls

Manufacturers of modern household appliances are trying to make the process of its operation as simple as possible. Therefore, even a more mature generation can be taught how to use the air conditioner remote control for its efficient operation. Thanks to a clear and comfortable interface, as well as convenient buttons, this process will not cause any inconvenience.

Now you can easily turn on air extraction, ventilation or ionization while sitting on the sofa or being in another part of the room. But make sure that there are no obstacles in the signal transmission path between the remote control and the air conditioner.

But there are situations when such an important element as the remote control breaks due to mechanical damage or is lost. The only thing you can do is turn on the air conditioner using the button on its side, if, of course, it is present there. In addition, the work will be carried out in automatic mode, so it is not possible to correct the data on temperature, speed and direction of air mass flow.

In this case, there are two options left. First, you can try to find an original sample of the same company. But remotes from different manufacturers are often difficult to find, which takes a lot of time. In addition, they have a rather high price.

Secondly, you can purchase a universal plan remote control. Such a product can be found in almost every home appliance store, as well as ordered via the Internet. In addition, if you have more than one air conditioner in your house or apartment, then there will no longer be a need to get confused in a large number of remote controls, one such instance will control all the equipment.

Thus, the remote control is a really important element in the process of operation, especially when it comes to the operation of the air conditioner. Thanks to him, you will be able to fully use your equipment and create the most comfortable conditions for you in the house.