What to do if the phone falls into the water. What to do if the phone falls into the water Samsung, LG, Lenovo, Xiaomi, Meizu, iPhone, Sony, ZTE, Asus, Android? What to do if the phone falls into the water

There are a lot of situations when our smartphone can meet water. You can get caught in a heavy downpour, topple a cup with a drink on a nearby smartphone, or even drop your phone into the water while taking a hot bath. Recently, smartphone manufacturers have been trying to implement water protection in their devices. Nevertheless, the percentage of such devices is still very small, so our article will be relevant for a long time.

We will tell you about what not to do if your smartphone gets wet, as well as several ways to fix this situation.

1. Remove the smartphone from the water, disconnect and disassemble

As we were taught in OBZH lessons, the first step is to get rid of the source of danger. In our case, we immediately take the device out of the water and turn it off. The smartphone has both slots and headphone / charging jacks through which water will instantly reach the insides and can cause a short circuit. After you take out the phone, you need to wipe it with a dry towel and remove the battery. This will completely de-energize the device and reduce the likelihood of a short circuit to zero. We advise you to remove the SIM card and memory card together with the battery.

IMPORTANT

Do not turn on your smartphone until you have completed all the steps in the instructions.

2.Wipe all parts of the device well

After you have taken out the device, you need to wipe it thoroughly with a dry towel to get rid of all visible moisture. Avoid using regular napkins or paper towels. It's no secret that paper napkins not only absorb moisture very well, but also quickly soak, breaking up into small fibers. These fluffs will clog into holes and crevices in the device and will only make things worse.

Take a rag or cloth towel and wipe the device dry both outside and inside if water does get there. Do not leave a single drop on the surface, because any small thing can cause corrosion and make the device inoperative.

3. Hair dryer or vacuum cleaner?

For most people, whose phone has been submerged, the following situation occurs. They successfully complete the first two points of our article, but then they start looking for additional solutions, what else can be done for a wet device. The most popular options are a hair dryer and a vacuum cleaner.

REMEMBER! Never use a hair dryer to dry your phone. Contrary to the idea that hot air will quickly dry out all moisture, you need to understand: the air flow will not only drive the water even deeper, but can also melt some parts.

You can use a vacuum cleaner to speed up the drying process. During drying, do not hold the hose too close to the smartphone, carry out the procedure for 7-10 minutes.

4. Put the phone in the sun in a box with absorbent or rice

Finally, when all the basic steps have been completed, you can proceed to the longest stage. The disassembled phone (we took out the battery, SIM card, USB flash drive) must be placed in a container with an absorbent substance. You have probably seen bags of such a substance in shoe boxes.

You can purchase such a substance in the store in advance, in case of such an emergency. But, if the ingress of water caught you off guard, regular rice may work as a “home substitute”. Put the device in the substance for a day and turn it over periodically, allowing water to drain from all crevices. Only after a day, after making sure that all the water has left the phone, you can try to start it.

If the device does not work, feel free to go to the service center.

5. What not to do

Finally, we want to list what categorically cannot be done if your phone fell into the water

• You cannot turn on the device right away. You can turn on the phone only after complete drying, when you have waited a sufficient amount of time for all the moisture to come out of the device. Naturally, in a “wet” state, it is strictly forbidden to connect the device to a power source (charge or connect to a computer).
• Do not disassemble the device. Most likely you are not an expert, and by disassembling the smartphone into parts (more than pulling out the battery), you will only make it worse. The water will get even deeper, and you will break something.

All the best. Take care of yourself and your phones 🙂

Today gadgets have become an integral part of any person's life. Any purchase of a new smartphone makes us feel joy and happiness, and when a smartphone accidentally falls into water, beer or other liquid, we start to panic and worry.

In today's article, we will tell you what to do if your phone falls into the water, and what steps to take.

As you know, in most cases, the phone can be saved, and the liquid environment has a significant effect on this. For example, if the phone is dropped into water with high alkali, the chances of success are minimal.

Most of all chances for successful resuscitation of the phone when dropped into running water.

What to do if the phone falls into the water Samsung, LG, Lenovo, Xiaomi, Meizu, iPhone, Sony, ZTE, Asus, Android?

So, let's take a look at how to rescue a phone from falling into water. First, if the touchscreen phone falls into water, unplug it immediately. After turning off the phone, remove the battery, memory card, and SIM card. This step will also prevent the phone from short-circuiting. In the event that your phone comes with a non-removable battery, then turn it off using the on / off button.

Figure 1. If the touchscreen phone falls into water, remove the battery as soon as possible.

These were the first steps to take in case a touchscreen phone fell into the water. Now you need to dry all the accessories and the smartphone, we will talk about the methods of drying the smartphone below.

How to dry a touchscreen phone dropped into water?

It is worth noting that you should not use your phone, headphones, and the phone's USB port until you have completely dried all the components.

Below are some ways to dry a phone that has been dropped in water, beer, or other liquid.

Method 1. How to dry a touchscreen phone in rice if it falls into water or water gets into it?

To dry the outside of your phone, you can use a paper towel or soft cotton cloth.

Figure 1. A paper or alcohol wipe is excellent at absorbing water in difficult parts of the phone.

You can use dry rice to dry the inside of your phone. Take a medium-sized bag, fill it with rice, and put your phone in there. It is very important that the rice completely envelops the phone.

Figure 2. Dry risk perfectly absorbs moisture, which will allow you to rid your smartphone of water in a matter of days.

Method 2. How to dry a touchscreen phone in silica gel if it falls into water or gets into it?

Besides rice, you can use silica gel to dry your phone. Silica gel bags are used in shoe boxes.

Figure 2. You can find the silica gel bags in the shoe box.

Method 3. How to dry a touchscreen phone on a battery if it falls into water or gets into it?

Many people will ask if it is possible to dry the phone on the battery? Definitely yes.

This is perhaps the easiest way to dry your phone, but it is risky nonetheless. For example, if you just put all the components of your phone on the battery, the battery may swell and need to be replaced. Thus, it is best to wrap the phone and the battery in a towel or thick cloth.

Method 4. How to dry a touchscreen phone with a hairdryer if it falls into water or gets into it?

Never try to dry your phone with a hairdryer. The reason for this is that the hair dryer blows out hot air, which causes the circuits in the telephone board to melt.

Figure 1. If you do decide to dry your phone with a hair dryer, be very careful and keep the hair dryer at a distance of 30 cm.

How long should the phone dry after falling into water?

In most cases, owners who drown their phone report that their device worked properly after 3-7 days. Again, you need to consider how your phone fell into the water, and how long it was there.

FAQ

What to do if the phone falls into water and does not charge anymore, the battery does not work?

You probably noticed that after the phone fell into the water, it stopped charging or sometimes a notification appears that headphones were connected to the phone. This problem usually disappears after the phone has been dried for a long time.

Of course, one cannot deny the possibility that the connector for charging the phone has fallen into disrepair. But before contacting a smartphone repair service center, it is best for you to dry your smartphone thoroughly and try to charge it again.

Figure 1. If after a long and thorough drying of the phone it does not charge, then the problem may only be in the USB cable or the charging connector.

Why does not the screen turn on, the sensor of the phone that has fallen into the water?

After dropping the phone into water, the touch screen may not respond to your touches for a long time. The reason is that the sensor has many layers, and liquid has got into one of them. In this case, you need to put the smartphone in a glove or wrap it in a scarf, and then put it on the battery. If the problem is not solved within 2 weeks, then you have only one way out - to contact the service center.

Methods for drying and repairing a phone after falling into water.

Most often, mobile phones that have fallen and have mechanical damage are brought in for repair. There are a lot of faulty devices and "drowned". Often the phone falls into a washstand or toilet. But sometimes one cup of tea is enough for failure. In this article we will tell you how to reanimate the "drowned man".

No one will give a guarantee, even the service center will not say with a 100% guarantee whether the phone will work. It all depends on how long the device has been in water and how quickly you dried it. Water usually seeps in through the headphone holes, charging jack. The likelihood of resuscitation of the device increases if you immediately disassemble the device and dry it.

Many people try to dry the device with a hairdryer, but this is an ineffective method of dealing with moisture.

Phone rescue instructions:

• Take it out of the water immediately. Remove the back cover and remove the battery
• Some modern models come with a screwed lid. In this case, the likelihood of saving the device is reduced.
• Unscrew the screws and remove the back panel, remove the battery, all cards
• Using a dry, lint-free cloth, blot everything inside, the battery also needs to be wiped off
• Leave all parts of the device on dry napkins and let dry completely
• Do not try to turn on the gadget. Wait 2 days to dry completely
• After that, collect the phone and turn it on

What to do if a Xiaomi, Samsung, Lenovo, Asus, Zte, Sony, iPhone, Android phone falls into the water?

This is the easiest option, but not the best one. The fact is that warm water accelerates metal corrosion, so all contacts oxidize faster. But you can still disassemble the phone, wipe it with a dry cloth and put it on the battery overnight. Assemble the device in the morning and try to turn it on.

Rice is an excellent adsorbent that absorbs moisture well. With its help, you can dry the device, while moisture is absorbed even from hard-to-reach places.

Instructions:

• Take your phone out of the water and quickly remove the cover
• Remove the battery, put in a bowl of dry rice
• Immerse the apparatus and the battery in the rice. Cover everything with cereals
• Leave the gadget to dry in rice for 2 days
• After 2 days, try to assemble and turn on the device

This does not mean that the phone is broken. Often during a shutdown, the battery runs out for 3 days. After that, it is unlikely to be able to charge it. Many Chinese phones are sold with two batteries. Try to replace it. Often the problem is in the oxidation of the USB connector through which the device is charged. In this case, you can re-solder the connector itself. But you are unlikely to cope on your own, so contact the service center.

Why does not the screen turn on, the sensor of the phone that has fallen into the water?

The phone can turn on after being dropped into water, but the screen does not respond to touch or does not light up at all. In this case, moisture has entered the screen. It is also possible to close the contacts in the screen. The service center may be able to fix the contacts and dry the screen. But often you have to completely change the screen.

If only this happened to your gadget, after falling into the water, then consider yourself lucky. This is a simple and inexpensive breakdown. The speaker is a hole through which moisture enters. The service center will quickly replace the speaker. You will not be able to fix it yourself.

It all depends on the quality and cost of the phone. The Chinese copies, which are "clones" of well-known manufacturers, have cheap cameras built in. It is almost impossible to repair them due to the difficulty of soldering the loops. Sometimes the replacement cannot be made, since the externally identical cameras can differ significantly. In this case, you will only have to use the front camera.

In known devices, the camera will have to be replaced. This will hit your wallet, as parts for well-known phones are not cheap. But maybe everything will be done by cleaning the contacts, and the camera will not have to be changed.

First, try cleaning the microphone hole. This is done with a toothpick or needle. But if you have no experience, then we do not recommend doing such repairs. You run the risk of piercing the microphone. In this case, a replacement part will be required. This fix is ​​also inexpensive, so consider yourself in luck.

Never dry the phone with a hair dryer or microwave, overheating will negatively affect the device's serviceability. You must not immediately try to turn on the device. You need to completely disassemble it, remove the SIM card and memory card. Put the device itself with the battery in rice for a day. Only then collect and try to turn it on. If the gadget does not respond, do not be discouraged, take it for repair. After cleaning the contacts, most devices work fine.

Do not try to deceive the seller and say that the device broke down on its own. Each phone has an indicator that changes color upon contact with water. Therefore, any technician will see that the phone is wet. Unfortunately, this is not a warranty case, so you will have to pay for the repair yourself.

As you can see, it is quite difficult to guarantee that the phone will work after drowning. If you reacted in time, disassembled and dried the device, then there is a chance to save the gadget.

VIDEO: Drying the phone of the "drowned man"

The cost of repairing a phone or tablet after water gets into it is different.

It all depends on the damage. Only diagnostics can determine the exact price.

Even the approximate price is determined by the actual breakdown, although in this entry I will try to indicate as accurately as possible the cost of repairing a phone that fell into the water.

NOTE: the price also depends on the place where you go and sometimes it reaches thirty percent of the difference - checked

Estimated cost of repairing a phone after water ingress

Typically, the price ranges from $ 10 to $ 80. There are, of course, exceptions, but there is one more thing.

If you don't take action right away, the repair may no longer help - it's checked.

NOTE: maximum oxidation does not occur immediately, so the smartphone may work for a while - death may occur later.

Also, the cost of resuscitation after falling into the water depends on the model. After all, there is no need to prove that expensive phones use more expensive components.

Most often, repairs are required: keyboard, speaker, microphone, screen, sensors and charging.

A critical situation is the oxidation of radioelements. Recovery is not always possible then.

Also, sometimes repairs are unprofitable and pointless, and diagnostics made in some workshops are paid in others for free. However, the price for it is small, somewhere between 0.5 and 1 dollar.

Phone firmware price

NOTE: the price does not depend on the name of the phone, for example, Lenovo, Samsung Galaxy, Huawei, HTC, Asus, LG, Nokia, but only on their category.

In case of flooding, sometimes it is necessary to alter the device.

For example, flash memory is damaged, the cost of which is about $ 40 (depending on the category of the device)

The price of the firmware ranges from $ 5 to $ 10, it also depends on the category and possibly the version.

Simple repair cost

Simple repairs are not expensive, but you will have to pay between $ 5 and $ 10. This can be, for example, cleaning from dirt.

After all, the phone does not always fall into the bathtub, where the water is clean. It can fall into a puddle where there is a solid mule at the bottom.

Corrosion cleaning cost

But this will tell you only after inspection - the corrosion is different, and if the motherboard is covered with it, then most likely they will give you the device and say goodbye.

For example, replacing a microcircuit can cost up to $ 40, and repairing broken conductors can also cost so much.

Again, a lot depends on the category, and it is as follows:

• Devices under $ 50 fall into the first category.
• To the second category up to $ 100
• In the third category from $ 100

That's it. As mentioned above, this is just a rough estimate of some of the repair prices. Good luck.

The phone, the remote control fell into the water, or just got very wet due to other circumstances - the situation is quite common.

What to do in this case? Recently I had to read tips on what to do if the phone fell into the water. It was advised to just shake it off well and dry it in a warm place in the sun on a radiator, etc.

The advice is generally correct - But ... I thought it was necessary to supplement these advice with extremely important remarks.

The first thing to do

It is necessary to remove the batteries from the remote control or the battery in the case of the phone. If it is, of course, recoverable. It will not be superfluous to remove SIM cards and memory cards from the phone. Why is it important?

The fact is that when moisture gets in, between conductors made of various metals of which there are many in electronic devices, electrolysis occurs, and with a connected power source this process is accelerated many times.

Therefore, the paths of the conductors on the board of the device, small elements will simply dissolve, leaving behind something that looks like dust. So do not let your phone "dissolve" as soon as possible, remove the battery from it.

And now, when the power source is disconnected, we shake it off and dry it.

Second, do not rush when drying

If your phone gets very wet, or has been completely in the water, then all the moisture from it will evaporate for a long time. It will take at least a day to dry, or better longer. It will be correct as far as possible to disassemble the device, ideally get the board, if you cannot, then at least remove the cover and the battery cover when drying, and of course we do not install the battery itself until it is completely dry.

If you knew how to get the board safely dry it under an incandescent lamp or in the sun, LED lamps will not help here, they do not heat up. But if you dry the entire phone, then avoid excessive temperatures: direct sun, very hot radiators, etc. Otherwise, the glass on the phone may fall off. Or worse, the case is deformed.

The summer sun can heat the plastic case of devices so much, especially if the plastic is black, that some types of plastics begin to warp and deform from heat. Here the rule is - better longer than hot. It can also be a good method to completely immerse the device in dry rice and stir it from time to time, the rice will absorb moisture.

And finally, if your phone is expensive and you don’t want to part with it forever, I recommend that after drying, even if the device is working properly, take it to those who are engaged in phone repair. This is important in order for a specialist to look at your drowned person and, if necessary, clean it in an ultrasonic bath.

Because even timely measures taken, in case of serious flooding, do not guarantee that the oxidation process has not started, and moisture has not remained under the microcircuits. In addition, even evaporated moisture leaves behind salts, well, unless you just drowned your phone in distilled water, which is unlikely. And if this oxidation process has begun, then efficiency is a matter of time.

And only complete disassembly and cleaning in an ultrasonic bath can save your gadget for sure.

With remote controls it is easier, you can disassemble it yourself and dry it as needed. I plan to write some notes in the future, so read it if you are interested.